• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.54-62
• /
• 2017

This study was carried to develop the chip-harvester and to analysis the operation productivity and cost for effective collection and forwarding of forest biomass. Main target specification of chip-harvester is speed of 8km/h, maximum climbing capacity of $30^{\circ}$ and maximum load capability of 2000 kg. Body structure is articulate type to reduce turning radius. Driving equipment is six-wheel drive, and a rear wheel is tandem bogie type to increase grip force. As a result of the driving test about developed chip-harvester, driving speed was 6.9 km/hr and 8.1 km/hr in ${\pm}10%$ slope with loaded and 7.3 km/hr and 7.9 km/hr in ${\pm}10%$ slope without load. As a result of the operation productivity and cost, operation productivity of grinding and forwarding was approximately $10m^3$ per day, and operation cost was 393,126 won per day.

• Journal of Advanced Engineering and Technology
• /
• v.11 no.4
• /
• pp.273-277
• /
• 2018

In the field of forest disaster prevention, drones are expected to save higher human resources than the existing manpower has, and produce high-efficiency results over time. However, operational limitations brought by short flight times have brought the environment of limited use of the various capabilities of the drone, and the existing development systems operating the multi-drone are mainly for performance purpose, so it is a difficult to use for forest disaster prevention. The purpose of this paper is to design the concept based on multi-drone operation procedure through analysis of mission of ground control system for forest disaster prevention.

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.147-153
• /
• 2017

The purpose of this study was to examine productivity and cost of tree-length harvesting using cable yarding system in a larch (Larix leptolepis) clear-cutting stand located in Pyeongchang-gun, Gangwon-do. We used tree-length harvesting method using cable yarding system with a tower yarder HAM300. The productivity was $17.6m^3/hr$ for felling, $12.4m^3/hr$ for delimbing, $4.2m^3/hr$ for yarding, and $8.1m^3/hr$ for processing. The total cost of the harvesting system was $48,381won/m^3$, which was majorly composed of yarding operation cost, at $40,169won/m^3$ (79.3%), while felling had the lowest cost at $1,154won/m^3$ (4.1%). Major factors affecting felling and processing productivity was tree volume and the number and thickness of branches for delimbing productivity. In addition, we suggest that training and education for machine operators were critical to improve yarding productivity.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.271-281
• /
• 2021

Pinus densiflora and Larix kaempferi forests not only extended the plantation management area but also cultivated to the sustainable wood supply chain during the last 5-years. These prescriptions are primarily done by manual operation activities, particularly in young tree tending. Two types of tending activities, brashing by brush cutter(BB) and pruning by pruning shear and saw(PP), were selected for the investigate of musculoskeletal disorders' level and postural risks using Ovako Working Posture Analysis System (OWAS). The postural risk indexes (BB and PP) ranged from 115 to 125 and 102 to 105, respectively. There is no significant difference between the species. The young tree tending operations had low postural risks. The results may be used as basic data to develop technical guideline for safe young trees.

• Journal of agriculture & life science
• /
• v.53 no.6
• /
• pp.35-44
• /
• 2019

The objectives of this study were to identify engineering problems in the design and installation of cable logging operation that affects productivity through case study of actual logging sites, and to analyze associated productivity loss and increased cost. As a result of the study, when the geographic conditions and engineering safety of the site are not sufficiently considered, deflection of the cable line can not be secured. Hourly productivity of the operation decreased to 65% and the logging cost increased by more than two times compared to the productive yarding operation, which lowered overall efficiency of the operation. Thus, it is required to spread filed technologies that minimize unnecessary production cost incurred due to the in-efficient logging operations as well as secure work safety and efficiency to expand cable logging operation throughout the country.

• Journal of Forest and Environmental Science
• /
• v.20 no.1
• /
• pp.40-50
• /
• 2004

This study was conducted to provide appropriate tending operation strategies for the natural deciduous forest, by the method of evaluating the stand quality, suggesting the removal plan for the undesirable trees, and predicting improvement cutting practice by tree quality evaluation. The results showed that average number of trees per ha was 717 stems, average DBH was 21.1cm. and average height was 13.6m. Canopy dominant species were in the order of Quercus serrata, Q. variabilis, Q. mongolica, Styrax obassia, and Ulmus davidiana var. japonica. Based on grades of four tree form factors for all tree in the study plots, we estimate the change of tree numbers. DBH and height with the improvement cutting by different tree grade. When the higher tree grade was applied to tending operation, the number of stem was decreased, but the values of DBH and height were not changed much, predicted to improve the stand quality.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.363-371
• /
• 2021

Forest operations like timber harvesting have already been mechanized to reduce hazards to the worker and increase productivity. However, timber harvesting operations have still been considered potentially dangerous and expensive on steep terrain. Teleoperation, to control the timber harvesting machine at a distance, has the potential to improve the safety, productivity and efficiency of harvesting operations on steep terrain. To verify the effects of teleoperation, an experimental prototype system of a monitor image-based teleoperation was constructed using a real forestry machine. In this study, the productivity of excavator based grapple loader, which is one of the most used mechanized harvesting equipment in the timber production, was analyzed using time-study method. Factors like skill and age of operators, influencing loader productivity in timber loading operation were also evaluated by statistical analysis. Productivity analysis results showed that less experienced operators were more productive than experienced operators for teleoperation through image of monitors in the operator cabin. These results are shown to be unfamiliar to the monitor image and different loading operation pattern by operators. According to the results, the monitor image-based teleoperation system of forestry machine need to improve the resolution and installation position of camera. It was expected that additional studies will be needed for real-time remote control of forestry machine in the future.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.625-632
• /
• 2010

This study was carried out to analyze the yarding productivity and cost of the man-power operation by plastic chute, the yarding operation by yarder attached in tractor (Chuncheon Tower-yarder) and yarding operation by Tower-yarder (RME-300T) in forest tending operation. As result of average yarding timber volume was 0.67 $m^3$, 3.8 $m^3$ and 7.3 $m^3$ per day and man, respectively. And, when an yarding timber volume was 60 $m^3$/ha, the total yarding time including setting up and dismantling time of the plastic chute and yarding line was 20 days and 2 hours, 7 days and 1 hours and 21 minutes, 3 days and 4 hours and 27 minutes, respectively. The operation costs were 104,448 won/$m^3$, 29,968 won/$m^3$ and 23,032 won/$m^3$, respectively. And, when yarding timber volume was 60 $m^3$/ha, the total operation cost including setting up and dismantling time of the plastic chute and yarding line was 7,429,173 won/ha, 2,431,573 won/ha and 1,610,672 won/ha, respectively.

• Journal of Korean Society of Forest Science
• /
• v.109 no.2
• /
• pp.195-201
• /
• 2020

A forest operation is considered as one of the riskiest environments for the development of musculoskeletal disorders because operators are exposed to harmful environmental conditions such as rough terrain, inclement weather, and poor working postures. In weed and kudzu removal operations, manual application is still common in Korea. In this study, we evaluated the ergonomic conditions of weed and kudzu removal in regeneration forests and the associated risk of musculoskeletal disorders. The risk of musculoskeletal disorders was evaluated using the Ovako Working Posture Analysis System and postural risk index. Postural risk was significantly higher for kudzu compared with weed removal operations. This suggests that kudzu removal operations must be improved to decrease postural risk.

• Journal of Korean Society of Forest Science
• /
• v.95 no.2
• /
• pp.194-202
• /
• 2006

The purpose of this study was to provide necessary requirements on accreditation for forest culture and recreational interpretive programs in order to set up the enforcement regulations of the Forest Culture and Recreation Act. The intention of this study was to contribute to raising the qualitative standards of forest interpreters through the adoption of accreditation procedures for forest culture and recreational education programs, to establish detailed standards regarding the accreditation of forest interpreter training courses, and to provide materials and resources useful in creating forestry policies regarding forest interpreters and forest culture and recreation. This study examined five topics: 1) To establish conceptual understanding of the accreditation procedures for forest culture and recreation interpretive programs, 2) To understanding the present status of training programs and courses related to accreditation procedures for forest culture and recreation interpretive programs, and examining the status of current forest interpreter training courses, 3) To propose an operational scheme for accreditation procedures for forest culture and recreation programs, and develop the goal of an operation of the accreditation procedures for forest culture and recreation programs, 4) To propose an operational scheme for accreditation procedures for forest culture and recreational education programs, and the operational scheme for forest interpreter training courses, and 5) To establishing a commission to evaluate the accreditation procedures for forest culture and recreation programs and operating guidelines.