• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.1
• /
• pp.117-129
• /
• 2017

This research was conducted to construct a tree belt around Saemangeum reclaimed land using various planting methods and to analyze initial growth amount, to provide practical data to construct tree belt of various purposes. Tree species used in tree belt construction were Pinus thunbergii and Quercus serrata, and the main planting treatment methods used were categorized by existence of windy fence, mixed planting, and un-mixed planting. Growth amount analysis was conducted using ANOVA to compare growth amounts in different experimental groups and Duncan's multiple range test. Growth amount analysis results of tree belt by planting method showed that it is most statistically plausible to install 50% porous windy fence from the direction of wind and frost, followed by planting P. thunbergii and Q. serrata in areas that require mixed tree species tree belt around Saemangeum reclaimed land. In areas where un-mixed planting tree belt is required, it was appropriate to use P. thunbergii alone without a windy fence. Lastly, if the purpose of the tree belt is limited to rapid growth, it was most ideal to plant P. thunbergii alone (without windy fence) or install 50% porous windy fence from the direction of wind and frost, followed by planting P. thunbergii and Q. serrata. This research is based on initial growth amount of tree belt and there is a need for a long-term monitoring of tree belt growth to increase tree-planting success rate in establishing tree belt according to Saemangeum internal development.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.27-42
• /
• 2016

Forest accounts for almost 64 percents of total land cover in South Korea. For inventorying, monitoring, and managing such large area of forest, application of remote sensing and geographic information system (RS/GIS) technology is essential. On the basis of spectral characteristics of satellite imagery, forest cover and tree species can be classified, and forest cover map can be prepared. Using three dimensional data of LiDAR(Light Detection and Ranging), tree location and tree height can be measured, and biomass and carbon stocks can be also estimated. In addition, many indices can be extracted using reflection characteristics of land cover. For example, the level of vegetation vitality and forest degradation can be analyzed with VI (vegetation Index) and TGSI (Top Grain Soil Index), respectively. Also, pine wilt disease and o ak w ilt d isease c an b e e arly detected and controled through understanding of change in vegetation indices. RS and GIS take an important role in assessing carbon storage in climate change related projects such as A/R CDM, REDD+ as well. In the field of climate change adaptation, impact and vulnerability can be spatio-temporally assessed for national and local level with the help of spatio-temporal data of GIS. Forest growth, tree mortality, land slide, forest fire can be spatio-temporally estimated using the models in which spatio-temporal data of GIS are added as influence variables.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.312-314
• /
• 2021

The government sees drones as a key future growth engine, prepares plans to foster the nation-led drone industry, conducts pilot projects in various fields, such as transporting goods, forest protection, monitoring, facility safety diagnosis, and is actively in the use of drones. In particular, the police are attempting to use drones to search for missing people. However, existing drones have a short operating time due to the limitation of battery time. The effectiveness of the existing drones is insufficient because it has no choice but to search by aerial photography on the mountain tops in hillside or dense forest. In this study, we propose an FPV drone that utilizes virtual reality as a drone that can overcome the limitations of searching for missing people.

• Journal of Korean Society of Forest Science
• /
• v.98 no.1
• /
• pp.94-105
• /
• 2009

Black locust (Robinia pseudoacacia) stand is representative lowland exotic plantation with low ecological quality and arrested succession in South Korea. To facilitate succession and restore natural vegetation, small canopy gaps (${\sim}57m^2$), which can modify minimally structural variables and reduce restoration related disturbances on stand, was established in the black locust stand, and oak (Quercus serrata) seedlings were introduced in the gap. Two types of varying levels were introduced for gap creation; cutting (C) and girdling (G) on canopies. Understory removal (CU and GU) treatment was applied as subtypes of structural modification. Growth (diameter, height and leaf area) of target species and responses (species composition, diversity and coverage) of understory community were monitored during study years (2007~2008). Canopy openness was different significantly among treatments but not for light availability. Based on the result of logistic regression, growth of height and leaf area of seedlings were significant variables on seedling survival. Height and leaf area of seedlings were increased during study years, although radial growth was reduced. During study years, there were no significant differences in species composition and diversity, and total coverage increased about 20%. Increase of resources by gap creation and understory removal likely affect growth of target species. Small gap creation was effective to reduce understory responses in composition and diverstiy. Synthesized, growth of target species and responses of understory community to small canopy gap creation exhibited, in short term, possibility of utilization in alternative forest restoration and management option. Long-term monitoring is necessary to certificate effect of artificial gap creation on forest restoration.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.3
• /
• pp.156-162
• /
• 2001

In order to monitor local climatic information, twelve automated weather stations (AWS) were installed in alpine area by the Alpine Agricultural Experiment Station, Rural Development Administration (RDA), at the field of major crop located in around highland area, and collected data from 1993 to 2000. Hourly measurements of air and soil temperature (underground 10 cm,20 cm), relative humidity, wind speed and direction, precipitation, solar radiation and leaf wetness were automatically performed and the data could be collected through a public phone line. Datalogger was selected as CR10X (Campbell scientific, LTD, USA) out of consideration for sensers' compatibility, economics, endurance and conveniences. All AWS in alpine area were combined for net work and daily climatic data were analyzed in text and graphic file by program (Chumsungdae, LTD) on 1 km $\times$ 1 km grid tell basis. In this analysis system, important multi-functionalities, monitoring and analysis of local climatic information in alpine area was emphasized. The first objective was to obtain the output of a real time data from AWS. Secondly, daily climatic normals for each grid tell were calculated from geo-statistical relationships based on the climatic records of existing weather stations as well as their topographical informations. On 1 km $\times$ 1 km grid cell basis, real time climatic data from the automated weather stations and daily climatic normals were analyzed and graphed. In the future, if several simulation models were developed and connected with this system it would be possible to precisely forecast crop growth and yield or plant disease and pest by using climatic information in alpine area.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.194-204
• /
• 2020

Cultivar parameters, which are key inputs to a crop growth model, have been estimated using observation data in good quality. Observation data with high quality often require considerable labor and cost, which makes it challenging to gather a large quantity of data for calibration of cultivar parameters. Alternatively, data in sufficient quantity can be collected from the reports on the evaluation of cultivars by region although these data are of questionable quality. The objective of our study was to assess the quality of crop and management data available from the reports on the regional adaptation trials for rice cultivars. We also aimed to propose the measures for improvement of the data quality, which would aid reliable estimation of cultivar parameters. DatasetRanker, which is the tool designed for quantitative assessment of the data for parameter calibration, was used to evaluate the quality of the data available from the regional adaptation trials. It was found that these data for rice cultivars were classified into the Silver class, which could be used for validation or calibration of key cultivar parameters. However, those regional adaptation trial data would fall short of the quality for model improvement. Additional information on management, e.g., harvest and irrigation management, can increase the quantitative quality by 10% with the minimum effort and cost. The quality of the data can also be improved through measurements of initial conditions for crop growth simulations such as soil moisture and nutrients. In addition, crop model improvement can be facilitated using crop growth data in time series, which merits further studies on development of approaches for non-destructive methods to monitor the crop growth.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.673-682
• /
• 2001

The objective of this study was to monitor vegetation development process after timber harvesting at (Mt.) Baekwoonsan Seoul National University Forests, Korea. Two monitoring plots were established in 1994 and woody plant were monitored from 1994 to 1999. Vegetation development pattern during last six years(1994-1999) after timber harvesting were as follows; Styrax obassia, Styrax japonica and Lindera erythrocarpa as of the existing tree were competitive species in the first year after clearcut, and Styrax japonica and Lindera erythrocarpa as of sprout tree) and Aralia elata as of seedling were dominant species in the sixth years after clearcut. Species diversity indices of harvested forest interior was decreased at the southwestern slope and increased at the northeastern slope. According to DBH distribution pattern, No. of individuals of Lindera erythrocarpa and Aralia elata showed vigorous growth in the sub-canopy layer and then Styrax japonica, Quercus serrata, Maackia amurensis, Lespedeza maximowixzii, Lindera obtusiloba, Staphylea bumalda, Clero-dendrum trichotomum, Weigela subsessilis, in order showed good growth in the sixth year after clearcut. Lindera erythrocarpa with a reversed J-shaped curve pattern by DBH class will be increased while Aralia elata with a J-shaped curve pattern will be decreased.

• Korean Journal of Environment and Ecology
• /
• v.28 no.4
• /
• pp.385-392
• /
• 2014

Quercus gilva Blume is an evergreen-leaved tree that belongs to Facaceae and grows in tropical and warm-temperate regions, such as Japan, Taiwan, China and Korea. This study was carried out to analyze the distribution and growth characteristics of Q. gilva in the native range. In Korea, this species was distributed in Jeju Island between 80 and 350 meter above sea level, and mainly in the south-western regions of the island from 100 to 200 meter above sea level. The average height of Q. gilva was $9.8{\pm}1.9$ meter, with most trees 9 and 12 meter tall. The average diameter at breast height was $22.6{\pm}6.8$ centimeter, with the majority between 20 and 30 centimeter. Several coppice shoots ($3.8{\pm}2.1$ pieces) were formed from stumps and inferred by frequent cuttings for use. Almost Q. gilva individuals(96.2%) were covered with kinds of vines(18 species), and evergreen Trachelospermim asiaticum (Siebold et Zucc.) Nakai was major species. The analysis of damage of vines revealed that the most dead branches were found with 9 to 12 meter height of Q. gilva, and the more vines attached, the larger damage to Q. gilva individuals. A continuous monitoring and investigation would be required to preserve this species in their habitats.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.175-184
• /
• 2012

This study was conducted to develop new mattress systems with vegetation base materials for protecting stream bank and rapid rehabilitation. Vegetation base materials are primarily compounded with fine soil, organic composts and peat moss as plant fibers, a water retainer and a soil improver. Peat moss can usually provide necessary natural fibers and organic materials in soil. Especially, peat moss can absorb up to 25 times its own weight in water and is therefore valued as a water retainer to prevent drying effect of vegetation base materials which can harm the growth of vegetation in mattresses. Normally mattress systems resist the lateral earth pressures or stream power by their own weight. Therefore, filled materials must have suitable weight, compressive strength and durability to resist the loading, as well as the effects of water and weathering. In this project, 100 to 200-mm clean, hard stones were basically specified, and about 50-mm rubbles were also used. Test application of new mattress system carried out in the stream bank of a small stream in the Gwangreung experimental forest, belonging to Korea Forest Research Institute (KFRI) in December 16th, 2006. As a result of the monitoring of vegetation coverage of test application plots (each plot size is 4 by 2 m), the coverage of all plots reached 100% in the end of May, 2007 (approximately 50 days passed after the first gemination of vegetation). The coverage of the plots using big hard stones and organic composts and the plots containing peat moss increased more rapidly. The results show that peat moss is effective to retain soil moisture and establish more sound environment for vegetation gemination.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.5
• /
• pp.79-89
• /
• 2014

This study was carried out to provide basic information to improve the surrounding ecosystems with benefit analysis and monitoring in cut slopes following establishment of a test construction to improve ecological environment in slopes of an expressway. Field tests from October 2012 to May 2013 were conducted in Seosejong IC and Shinyang IC. In order to improve the view of slopes, soil condition is an important factor. The earth slope, it is possible to introduce directly the plant. Stable construction method was applied, another foundation for planting is necessary. The mixing ratio of the seeds according to the experimental results, the difference was found at an early stage plants in Site I (Seosejong IC). Trees were planted on terraced structures were well coordinated and pictures. The growth of planted trees was good in Site II (Shinyang IC). Due to the use of plants in the landscape will continue to change. Thus, long-term monitoring and landscape analysis will be needed.