• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2636-2646
• /
• 2002

This research presents an analytical model to investigate vibration due to ball bearing waviness in a rotating system supported by two or more ball bearings, taking account of the centrifugal force and gyroscopic moment of the ball. The waviness of rolling elements is modeled by the sinusoidal function, and it is incorporated into the position vectors of the race curvature center. The Hertzian con tact theory is applied to calculate the elastic deflection and nonlinear contact force while the rotor has translational and angular motions. Both the centrifugal force and gyroscopic moment of the ball and the waviness of the rolling elements are included in the kinematic constraints and force equilibrium equations of a ball to derive the nonlinear governing equations of the rotor, which are solved by using the Runge-Kutta-Fehlberg algorithm to determine the new position of the rotor. The proposed model is validated by the comparison of the results of the prior researchers. This research shows that the centrifugal force and gyroscopic moment of the ball plays the important role in determining the bearing frequencies, i.e. the principal frequencies, their harmonics and the sideband frequencies resulting from the waviness of the rolling elements of ball bearing. It also shows that the bearing vibration frequencies are generated by the waviness interaction not only between the rolling elements of one ball bearing but also between those of two or more ball bearings constrained by the rotor.

• Wind and Structures
• /
• 제38권1호
• /
• pp.59-74
• /
• 2024

Large Eddy Simulation (LES) is used to explore the influence of vibration frequency and amplitude on the aerodynamic performance of a rectangular cylinder with an aspect ratio of B/D=5 (B: breadth; D: depth of cylinder) at a Reynolds number of 22,000 near resonance frequency. In smooth flow conditions, the research employs a sequence of three-dimensional simulations under forced vibration with diverse frequency ratios f_e / f_o = 0.8-1.2 (f_e : oscillation frequency; f_o : Strouhal frequency when the rectangular cylinder is stationary ) and oscillation amplitudes A_h/D = 0.05 - 0.3. The individual influences of f_e / f_o and A_h/D on the characteristics of integrated and distributed aerodynamic forces are the focal points of discussion. For the integrated aerodynamic force, particular emphasis is placed on the analysis of the dependence of velocity-proportional component C₁ and displacement-proportional component C₂ of unsteady aerodynamic force on amplitude and frequency ratio. Near the resonance frequency, the dependencies of C₁ and C₂ on amplitude are stronger than that of frequency ratio. For the distributed aerodynamic force, the increase in frequency and amplitude promotes the position of the main vortex core and reattachment to the leading edge in the streamwise direction. In the spanwise direction, vibration enhances the spanwise correlation of aerodynamic force to weaken the three-dimensional effect of the flow field, and a lower frequency ratio and larger amplitude amplify this effect.

• 대한인간공학회지
• /
• 제26권1호
• /
• pp.29-37
• /
• 2007

This study was performed to evaluate the characteristics of transmitted vibration to hand-arm system under different work posture while operating a light-weighted powered hand grinder. For the experiment, 8 different types of wrist posture (natural, unlar-flexion, radual-flexion, flexion, extension, complex posture, and etc.) and 3 types of feed force (20[N], 50[N], 70[N]) were considered. 10 male subjects were employed to polish metal plate with a hand grinder. All of them were normal and healthy with no history and symptom of the work related musculoskeletal disorders in the dominant hand. Vibration acceleration data were recorded with sampling rate, 2048[Hz]. In addition, unweighted overall R.M.S. acceleration at the tool and wrist, and transmissibility between them were used to evaluate factors from the recorded tri-axial vibration acceleration. The results indicate that transmissibility of natural wrist posture was significantly higher than others. In addition, as the feed force becomes larger, the vibration was transmitted in large quantities to hand-arm system through radius.

• 전력전자학회논문지
• /
• 제6권3호
• /
• pp.250-257
• /
• 2001

SRM 드라이브는 펄스 기자력과 스위칭 전류원리상 큰 소음과 진동이 발생된다. SRM 드라이브에서 발생하는 진동.소음의 주된 원인은 상 스위치-오프시의 고정자와 회전자 사이에 자기적인 스트레스로 작용하는 바사방향의 급격한 전자력 변화에 의한 고정자 프레임의 탄성진동에 의해 발생한다. 본 논문에서는 이러한 SRM 드라이브의 진동을 저감하는 방법으로 기존의 SRM에 상권선과 동일한 자속이 발생하도록 단방향 보상권선(Compensating Winding)을 감아 컴뮤테이션 기간동안 2단계 소호전압방식을 적용하는 방법을 제안하고자 한다. 2단계 소호전압방식을 적용함으로서 상전류를 빨리 소호시킬 수 있고 이로 인해 토크 활용구간과 에너지 활용도를 넓힐 수 있어서 큰 출력을 발생시킬 수 있었으며, 진동.소음저감효과를 얻울 수 있었다

• 소음진동
• /
• 제5권3호
• /
• pp.413-421
• /
• 1995

냉난방용 회전기기에 의한 방사광가속기 건물의 진동은 내부에 설치되어 있는 광학장치나 전자장비의 성능에 영향을 미치기 때문에 건설단계에서 부터 건물 진동에 대한 평가가 매우 중요하다. 본 연구에서는 방사광가속기 건물의 진동을 평가 하기 위해서 실험적 모우드해석법을 이용하여 냉난방기기가 위치한 바닥의 동적특성 을 구하고, 하중응답 모사법을 통해 진동응답치를 계산하였다. 평가결과, 건물바닥의 진동치는 기준치를 상회하고 있으며 이를 해결하기 위해 이중방진 시스템을 설계 제작하여 냉난방기기와 바닥 사이에 설치함으로써 바닥의 진동을 허용한도 이내로 감소시켰다.

• 대한조선학회논문집
• /
• 제39권1호
• /
• pp.73-81
• /
• 2002

일반적으로, 선박에 탑재되는 장비의 진동문제는 장비자체의 기진력에 의한 진동문제뿐만 아니라 외부기진력인 주기관과 추진기의 기진력이 장비하부 데크를 통하여 장비에 과도 진동을 유발하는 경우가 많다. 따라서 본 연구에서는, 선박에 탑재되는 장비 마운팅 시스템의 진동 성능을 평가할 수 있도록 고유진동해석, 전달율계산, 강제진동해석 등을 수행할 수 있는 프로그램을 개발하였고, 선내 주요기진원과 장비의 공진시 공진회피를 위한 마운트 설계 변경 프로그램과, 그리고 장비 마운트 하부데크의 진동에 의한 장비의 무게중심에서 속도응답이 최소가 되도록, 마운트 강성을 결정하는 최적화 프로그램을 개발하였다.

• 한국지진공학회논문집
• /
• 제3권1호
• /
• pp.103-112
• /
• 1999

본 연구는 두 지점간의 진동수 응답함수를 이용하여 시간 및 진동수 영역에서의 원심펌프(20Hp. 50Hp) 가진력을 추정하기 위한 것이다. 진동수 응답함수는 실수부와 허수부에 대한 신호정보를 가지고 있으며 응답함수 역시 실수부와 허수부에 대한 신호정보를 가지고 있다 따라서 이들 진동수 응답함수 및 응답함숴의 복소수 계산으로부터 가진력을 실험적으로 구하였으며 이론적인 방법에 의하여 구한 가진력과 실험적으로 구한 값을 비교함으로서 펌프에 의한 주진동수 성분의 크기는 펌프 및 모터중량의 10-25% 정도가 됨을 제시하였다. 가진력 산정을 위한 시간영역에서의 불평형질량의 크기는 펌프 및 모터중량의 약 30-60%임을 알수 있었다 한편 펌프회전에 의한 진동은 주진동수 이외에도 주진동수의 2-3배의 크기를 갖는 성분이 있음을 알 수 있었으며 대상 콘크리트 슬래브의 고유진동수와의 가진진도수비를 달리함에 따라 정확한 진동전달률을 조절하는데 활용할 수 있다.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.697-703
• /
• 2006

This article proposes a new technique for the reduction of vibration and noise in the geared system by adjusting the distance between gear shafts. The vibration and noise may be produced by the abnormal force applied to the tooth face. And the force may be the cause of ununiform velocity in the driven shaft. If the velocity is obtained to be uniform by adjusting the distance between shafts. the vibration and noise may be reduced to some extent. In order to review, a dynamic analysis model for the gear train used in a mill turret and a test rig are developed. The velocities in the driven shaft are calculated by dynamic simulations for the model and noises in the test rig are measured with varying of the distance between shafts. The comparison of simulation and test data shows that the distance between shafts at the most uniform velocity has the lowest level of noise.

• Earthquakes and Structures
• /
• 제3권6호
• /
• pp.821-838
• /
• 2012

This paper proposes a new three-layer pillar-type hysteretic damper system for residential houses. The proposed vibration control system has braces, upper and lower frames and a damper unit including hysteretic dampers. The proposed vibration control system supplements the weaknesses of the previously proposed post-tensioning vibration control system in the damping efficiency and cumbersomeness of introducing a post-tension. The structural variables employed in the damper design are the stiffness ratio ${\kappa}$, the ductility ratio ${\mu}_a$, and the ratio ${\beta}$ of the damper's shear force to the maximum resistance. The hysteretic dampers are designed so that they exhibit the targeted damping capacity at a specified response amplitude. Element tests of hysteretic dampers are carried out to examine the mechanical property and to compare its restoring-force characteristic with that of the analytical model. Analytical studies using an equivalent linearization method and time-history response analysis are performed to investigate the damping performance of the proposed vibration control system. Free vibration tests using a full-scale model are conducted in order to verify the damping capacity and reliability of the proposed vibration control system. In this paper, the damping capacity of the proposed system is estimated by the logarithmic decrement method for the response amplitudes. The accuracy of the analytical models is evaluated through the comparison of the test results with those of analytical studies.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.196-202
• /
• 2019

In this study, the excessive noise and vibration phenomena of a high-speed Ro/Ro passenger ship were analyzed, and a countermeasure was taken based on them. This ship was granted a comfort class notation by the classification society, which was COMFORT-VIBRATION-II and COMFORT-NOISE-CREW-II. However, unfortunately, excessive noise and vibration in the aft part of the ship were delivered from the twin shaft propellers, and therefore the Class Requirement was not satisfied before delivery. In order to obtain the class notation, all of the concerned parties came to an agreement to reduce the noise and vibration level during operation after delivery because a seasonal ferry service was already scheduled and the cabin was fully booked. The root cause of the massive amount of noise and vibration was mainly the propeller-induced excitation pulse and beating that occurred from the mismatch of the rotating speeds of the two shaft lines. A 1st order vibrating force and beating phenomena existed in the propeller. Thus, a reduction of the excitation force, elimination of the beating phenomena, and decrease of the noise level at the aft area cabins and public spaces were required. In addition, structural reinforcements were conducted using pillars and additional girders at the aft part of the decks.