New three-layer-type hysteretic damper system and its damping capacity |
Kim, Hyeong Gook
(Department of Urban and Environmental Engineering, Kyoto University)
Yoshitomi, Shinta (Department of Architecture and Architectural Engineering, Graduate School of Engineering, Kyoto University) Tsuji, Masaaki (Department of Architecture and Architectural Engineering, Graduate School of Engineering, Kyoto University) Takewaki, Izuru (Department of Architecture and Architectural Engineering, Graduate School of Engineering, Kyoto University) |
1 | Aiken, I.D., Nims, D.K., Whittaker, A.S. and Kelly, J.M. (1993), "Testing of passive energy dissipation systems", Earthq. Spectra, 9(3), 335-370. DOI ScienceOn |
2 | Apostolakis, G. and Dargush, G.F. (2010), "Optimal seismic design of moment-resisting steel frames with hysteretic passive devices", Earthq. Eng. Struct. D., 39(4), 355-376. |
3 | Benavent-Climent, A. (2011), "An energy-based method for seismic retrofit of existing frames using hysteretic dampers", Soil Dyn. Earthq. Eng., 31(10), 1385-1396. DOI ScienceOn |
4 | Chan, R.W.K. and Albermani, F. (2008), "Experimental study of steel slit damper for passive energy dissipation", Eng. Struct., 30(4), 1058-1066. DOI ScienceOn |
5 | Christopoulos, C. and Filiatrault, A. (2006), Principle of passive supplemental damping and seismic isolation, IUSS Press, University of Pavia, Italy. |
6 | Hanson, R.D. and Soong, T.T. (2001), Seismic design with supplemental energy dissipation devices, EERI, Oakland, CA. |
7 | Housner, G.W., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F., Skelton, R.E., Soong, T.T., Spencer, B.F. and Yao, J.T.P. (1997), "Special issue, Structural control : past, present, and future", J. Eng. Mech.-ASCE, 123(9), 897-971. DOI |
8 | Inoue, K. and Kuwahara, S. (1998), "Optimum strength ratio of hysteretic damper", Earthq. Eng. Struct. D., 27(6), 577-588. DOI ScienceOn |
9 | Kozo System (2011), General-purpose elastic-plastic analysis program for arbitrary-shaped three-dimensional frames (SNAP), Tokyo. |
10 | Kim, H.G., Yoshitomi, S., Tsuji, M. and Takewaki, I. (2011), "Development of pillar-type hysteretic damper system composed of three layers and evaluation of its damping capacity", Proc. of The ASEM11+ Congress, Seoul, Korea, 1110-1124. |
11 | Kim, J.K. and Seo, Y.L. (2004), "Seismic design of low-rise steel frames with buckling-restrained braces", Eng. Struct., 26(5), 543-551. DOI ScienceOn |
12 | Li, H.N. and Li, G. (2007), "Experimental study of structure with "dual function" metallic dampers", Eng. Struct., 29(8), 1917-1928. DOI ScienceOn |
13 | Moreschi, L.M. and Singh, M.P. (2003), "Design of yielding metallic and friction dampers for optimal seismic performance", Earthq. Eng. Struct. D., 32(8), 1291-1311. DOI ScienceOn |
14 | Nakashima, M., Saburi, K. and Tsuji, B. (1996), "Energy input and dissipation behavior of structures with hysteretic dampers", Earthq. Eng. Struct. D., 25(5), 483-496. DOI |
15 | Oh, S.H., Kim, Y.J. and Ryu, H.S. (2008), "Seismic performance of steel structures with slit dampers", Eng. Struct., 31(9), 1997-2008. |
16 | Skinner, R.I., Kelly, J.M. and Heine, A.J. (1975), "Hysteretic dampers for earthquake-resistant structures", Earthq. Eng. Struct. D., 3(3), 287-296. |
17 | Takewaki, I. (2009), Building control with passive dampers: -Optimal performance-based design for earthquakes-, John Wiley & Sons Ltd. (Asia). |
18 | Tani, T., Yoshitomi, S., Tsuji, M. and Takewaki, I. (2009), "High-performance control of wind-induced vibration of high-rise building via innovative high-hardness rubber damper", Struct. Des. Tall Spec., 18(7), 705-728. DOI ScienceOn |
19 | Tsuji, M., Fujuwara, Y., Murata, S., Kim, H.G., Yoshitomi, S. and Takewaki, I. (2010), "Post-tensioning damper system for micro-vibration reduction in residential houses: Analysis of effective deformation ratio by a simplified model", J. Struct. Eng.-AIJ, 56B (in Japanese). |
20 | Yamaguchi, H. and El-Abd, A.M. (2003), "Effect of earthquake energy input characteristics on hysteretic damper efficiency", Earthq. Eng. Struct. D., 32(6), 827-843. DOI ScienceOn |