• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.252-259
• /
• 2009

This study investigated the effects of ion water and premixed mineral supplementation on the growth performance, carcass, and meat quality parameters in finishing pigs ($LY{\times}D$). Each 20 pigs were randomly allotted to three treatments; CON (basal diet), T1(CON diet added with active water), T2 (T1 diet added with 1.0% premixed mineral). Used ion water and premixed mineral were consisted mainly of Zn and Si, respectively. Daily weight gain feed efficacy were the highest in T2, while fat content was the highest in control (p<0.05) than the others. However, the slaughter qualities including dressing percent, backfat thickness, marbling score, meat color, meat texture, drip loss, meat separation and meat qualities including pH, cooking loss, water holding capacity (WHC), shear force, meat color, backfat color, meat texture were not significantly different (p>0.05) among the treatment groups. Panel test scores of tenderness were the highest in T2 compared to the others.

• Journal of Korea Water Resources Association
• /
• v.49 no.2
• /
• pp.83-94
• /
• 2016

Geomorphological, bed material and hydraulic characteristics are basis informations for the planning, design and management of the river in the aspect of flood control and environmental conservation, and it is very important to use these informations for the design of stable channel. In this study, dominant discharge was selected, geomorphological and hydraulic characteristics were analyzed using that discharge and also the characteristics of bed materials distribution were analyzed and bed materials-flow resistance relationship was evaluated, for the upstream section of Namgang dam. The dominant discharge was estimated a return period of approximately 1.5 year and stream type were classified Segment 1 and Segment 2 in this stream. Also, the frequency of riffle-pool showed 4.4 because this study area has the characteristics of natural channel that have not channel-crossing structures. In dominant discharge, according to the results that analyzed relationship between $h/d_{50}$ and $V/u_*$ to calculate flow resistance by bed materials, Julian's formula showed to appropriate in channel where is relatively close to natural river and is predominantly consisted of gravel, cobble, boulder and rock in mountain, and it was confirmed that the image processing methodology will be easily applied to the analysis of bed materials distribution in future.

• Membrane Journal
• /
• v.16 no.3
• /
• pp.182-187
• /
• 2006

The purpose of this study was to investigate effect of coagulation on filtration performance of membrane in submerged MBR system and influence of continuous aeration to reduce fouling of membrane surface on coagulated floc. For this purpose, aeration tank sludge of MBR system was compared with jar-test sludge. The experimental results were analysed in terms of floc size and SRF (Specific resistance of Filtration). The more alum was added, the more content of floc below $10{\mu}m$ reduced and SRF decreased. But compared with jar-test results, it was found that effect of coagulation on MBR floc was reduced. Operation time of membrane in alum added MBR was longer than that in control MBR. But operation time was not proportional to alum dose. It was thought that the result was reason that floc below $10{\mu}m$ was not reduced sufficiently by shear force of continuous aeration. Moreover it was founded that if alum is added more than proper dose, it brings filtration resistance to increase.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.521-525
• /
• 2013

In this study, we investigated the physicochemical characteristics of wet noodles that had been fortified by adding non-glutinous sorghum (Sorghum bicolor L. Moench cv. Donganme) powder (SP). The wet noodles were evaluated for quality characteristics, total contents of polyphenols and flavonoids, and capacities to scavenge free radicals. The weight, volume, capacity to absorb water, and turbidity of the cooked noodles differed considerably from the unfortified control. The L- and b-values of the cooked noodles differed significantly between the treatment types, and the a-value increased significantly with increasing concentrations of SP. The tension of the cooked noodles decreased significantly with decreasing concentrations of SP. Total polyphenol and flavonoid contents, as well as free radical-scavenging activities increased significantly with increasing concentrations of SP. In conclusion, SP could be used as an ingredient to increase the sensory and antioxidant properties of wheat flour noodles without affecting their quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5541-5549
• /
• 2015

This paper introduces a safer and more power efficient heater by using induction heating, to apply to the semiconductor wafer fabrication exhaust gas cleaning system. The exhaust gas cleaning system is currently made with filament heater that generates an endothermic reaction of N2 gas for the removal of moisture. Induction theory, through the bases of theoretical optimization and electronic implementation, is applied in the design of the induction heater specifically for the semiconductor wafer exhaust system. The new induction heating design provides a solution to the issues with the current energy inefficient, unreliable, and unsafe design. A robust and calibrated design of the induction heater is used to optimize the energy consumption. Optimization is based on the calibrated ZVS induction circuit design specified by the resonant frequency of the exhaust pipe. The fail-safe energy limiter embedded in the system uses a voltage regulator through the feedback of the MOSFET control, which allows the system performance to operate within the specification of the N2 Heater unit. A specification and performance comparison from current conventional filament heater is made with the calibrated induction heater design for numerical analysis and the proof of a better design.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.393-398
• /
• 2004

To investigate the effect of dietary mugwort pellet on the growing performance and meat quality barrow (T1) and boar (T2) were alloted into six treatments : 1) commercial feed, 2) T1-1 and T2-1 (commercial feed supplemented with 3.0％ mugwort pellet), 3) T1-2 and T2-2 (commercial feed supplemented with 5.0％ mugwort pellet). They were fed experimental diets for 60 days before slaughtered. Meat samples were taken in wrap package and stored at 4$\pm$1$^{\circ}C$. Daily gain in both groups (T1 and T2) were higher than those of the control (p<0.05). Feed conversion tended to be lower in barrow group than boar group and tended to be decreased according to supplementation of mugwort pelleted diet in barrow group. In both barrow and boar groups, proximate compositions of pork were not sigificantly different, except for crude fat. Crude fat content was tended to be low in barrow when fed mugwort pelleted diet. Shear force value and sensory properties were siginificantly higher in barrow group than in boar group (p<0.05) and these results were also seemed due to great fed mugwort pelleted aiet(p<0.05). In the barrow group, values of tenderness and flavor were the highest in pigs fed diet supplemented with 3.0％ mugwort. The catechin content of pork tended to be higher in boar group than in barrow group and catechin tended to increase with supplementation of mugwort in the diet.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.1
• /
• pp.69-75
• /
• 2006

Head and neck squamous cell carcinoma(HNSCC) is the sixth most common cancer among men in the developed world affecting the tongue, pharynx, larynx and oral cavity. HNSCC is thought to represent a multistep process whereby carcinogen exposure leads to genetic instability in the tissue and accumulation of specific genetic events, which result in dysregulation of proliferation, differentiation, and cell loss and the acquisition of invasive capacity. Despite therapeutic and diagnostic progress in oncology during the past decades, the prognosis of HNSCC remains poor. Thus it seems that finding a biological tumor markers which will increase the early diagnosis and treatment monitoring rates, is of paramount importance in respect to improving prognosis. In an effort to identify gene expression signatures that may serve as biomarkers, this study several genes were selected, such as H3,3A, S100A7, UCHL1, GSTP1, PAI-2, PLK, TGF${\beta}$1 and bFGF, and used 7 HNSCC cell lines that were established various anatomical sites, and also 17 other cancer cell lines were used for control group using real-time quantitative RT-PCR and immunocytochemical analysis with a monoclonal antibody. In this study, S100A7 showed a clearly restricted occurrence in tongue originated cell line, and GSTP1 expression level in the pharynx originated cell line was very increased, relative to corresponding other cell lines. These results suggest that S100A7 and GSTP1 genes' expression can occur during tongue and pharynx originated head and neck tumorigenesis and that genetic change is an important driving force in the carcinogenesis process. This data indicate that S100A7 and GSTP1 expression pattern in HNSCC reflect both diagnostic clue and biological marker. And this is provides a foundation for the development of site-specific diagnostic strategies and treatments for HNSCC.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.675-686
• /
• 2007

Statement of problem: Titanium nitride(TiN) coatings are the most general and popular coating method and used to improve the properties of metallic surface for industrial purposes. When TiN coating applied to the abutment screw, frictional resistance would be reduced, as a results, the greater preload and prevention of the screw loosening could be expected. Purpose: The purpose of this study was to investigate mechanical properties of TiN coated film of various coating thickness on the titanium alloy surface and to evaluate proper coating thickness. Material and method: 95 Titanium alloy (Ti-6Al-4V) discs of 15 mm in diameter and 3 mm in thickness were prepared for TiN coating and divided into 7 groups in this study. Acceding to coating deposition time (CDT) with TiN by using Arc ion plating, were divided into 7 groups : Group A (CDT 30min), Group B (CDT 60min), Group C (CDT 90min), Group D (CDT 120min), Group E (CDT 150min), Group F(CDT 180min) and Group G (no CDT) as a control group. TiN coating surface was observed with Atomic Force Microscope(AFM), field emission scanning electron microscopy(FE-SEM) and examined with scratch tester, wear tester. Result: 1. Coating thickness fir each coated group was increased in proportion to coating deposition time. 2. Surface of all coated groups except Group A was homogeneous and smooth. However, surface of none coated Group G had scratch. 3. Adhesion strength for each coated group was increased in proportion to coating deposition time. 4. Wear resistance for each coated group was increased in proportion to coating deposition time. 5. Surface roughness in Group A, B, C was increased in proportion to coating deposition time. But, surface roughness in Group D, E, F was showed decreased tendency in proportion to coating deposition time. Conclusion: According to coating deposition time, mechanical properties of TiN coated film were changed. It was considered that 120 minutes coating deposition time ($1.32{\mu}m$ in coating thickness) is necessary.

• Korea journal of population studies
• /
• v.16 no.2
• /
• pp.125-139
• /
• 1993

Korea has successfully achieved a lowered fertility level owing to the strong population control policy and effective family planning program. Along with fertility decline and decreased number of children in family, average number of household members has decreased and nontraditional households such as one person household and households composed of unrelated individuals have prolifirated, even though the absolute number of them are found minimal in Korea. However in recent years several data and survey results suggest that one person households are gradually in the increasing trend. The study aimed at investigating the real state of one person households in Korea and next analyzing the proportional distribution of one person households by a few socioeconomic characteristics, thus providing basic for eatablishing far-singhted population and social welfare policy in the future. Korea has experienced high growth rate of economy through government-led development plans starting from the 1960s. During the past three decades, Korea has shifted from the agricultural state to the industrialized one. In compliance with the economic growth, urbanization and industrialization have brought about rural-to-urban migration and a great bulk of young population migrated to urban areas, who are seeking for educational and job opportunities. Korean society has also been under drastic change in every aspect of life involving norms, tradition, and attitude, etc. Therefore, in spite of the prejudice on 'living alone' still remaining, young people gradually leave parents and home, and further form nontraditional households in urban areas. Current increase in the number of one person households is partly attributable to the increase in high female educational attainment and female participation in economic activities. As the industrial structure in Korea changes from primary into secondary and tertiary industries, job opportunities for service/sales and manufacturing are opened to young female labor force in the process of industrialization. Contrary to the formation of one person households by young people, the aged single households are composed when children in family leave one by one because of marriage, education, employment. In particular, a higher proportion of aged female single households occur in rural areas due to the mortality difference by sex. Based on the data released form the 1990 Population and Housing Census and National Fertility and Family Health Survey in 1985 and 1991, the study tried to examine the state of one person households in Korea. According to Census data, the number of one person households increased to 1, 021, 000 in 1990, comprising 9.0 percent of total households. And the survey reveal that among total 11, 540 households, 8.0 percent, 923 households, are composed of one person households. Generally, the proportion of female single households is greater than that of male ones, and a big proportion of one person households is concentrated in the 25-34 age bracket in urban areas and 65 years and more in rural areas. It is shown than one person householders in urban areas have higher educational attainment with 59.2 percent high schooling and over in 1991, Job seeking proved to be the main reason for leaving home and forming one person households. The number of young female single households with higher education and economic self-reliance are found nil and the study did not allow to analyze the causal realtionship between female education and employment and one person household formation. However more research and deep analysis on the causal facors on one person household formation using statistical method are believed to be necessary.

• Archives of Pharmacal Research
• /
• v.27 no.6
• /
• pp.646-652
• /
• 2004

The objective of this study was to determine the acute effect of trimetazidine (TMZ) on the pre-fatigue, fatigue and post-fatigue contractile characteristics and tension-frequency relationships of isolated rat diaphragm muscle. Muscle strips were taken from the ventral-costal aspects of the diaphragm muscle of rats killed by decapitation. The muscle strips were suspended in organ baths containing Krebs solution, with a gas mixture of 95% $O_2$ and 5% $CO_2$ at $37^{\circ}C$ and pH 7.35-7.45. After determining the thermoregulation and optimum muscle length the muscles were subjected to direct supramaximal stimulation with 0.05 Hz frequency square pulses for periods of 0.5 msec to obtain control values. After adding $5{\times}10^{-6}{\;}and{\;}5{\times}10^{-5}$ M trimetazidine solution to the respective bath media, the contractile parameters of the muscles were recorded. The contractile parameters were also recorded for both the trimetazidine and tri-metazidine-free media after application of the high frequency fatigue protocols. Later, the tension-frequency relationship was determined by applying stimulating pulses of 10, 20, 50 and 100 Hz to the muscle strips. Whilst the twitch tension obtained from the $5{\times}10^{-6}{\;}and{\;}5{\times}10^{-5}$ M trimetazidine media showed numerical increases compared to that of the controls, these were not statistically significant (p>0.05). The contraction time exhibited a dose dependent increase (p<0.001), whilst the contraction and relaxation rates did not differ significantly. The isometric contraction forces obtained with the different stimulating frequencies showed a significant increase in the tetanic contraction only at 100 Hz (p<0.05). A comparison of the pre- and post-fatigue twitch tensions in the trimetazidine media showed the post- fatigue twitch tensions to be significantly higher than those of the pre-fatigue contraction forces (p<0.05). In the $5{\times}10^{-6}{\;}and{\;}5{\times}10^{-5}$ M trimetazidine media the increases in the post-fatigue contraction force were 22 and 30%, respectively. These results demonstrated that in isolated rat diaphragm muscle, TMZ significantly limited the mechanical performance decrease during fatigue. It is our opinion that trimetazidine contributed to the observed fatigue tolerance by eliminating the factors of fatigue, due to preservation of intracellular calcium homeostasis, provision of the ATP energy levels needed by ATPase dependent pumps and especially by keeping the intracellular pH within cer-tain limits.