• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.611-617
• /
• 2008

Nowadays Plate Heat Exchanger (PHE) is widely used in different industries such as chemical, food and pharmaceutical process and refrigeration due to the efficient heat transfer performance, extreme compact design and efficient use of the construction material. In present study, discussed main conception of plate heat exchanger and applied in vacuum. PHE and aimed apply in the fresh water generator which installed in ship to desalinate seawater to fresh water use heat from engines. The experiment is proceeded to investigate the heat transfer between cold and hot fluid stream at different flow rate and supply temperature of hot fluid. Generated fresh water as outcome of the system. PHE is an important part of a condensing or evaporating system. One of common assumptions in basic heat exchanger design theory is that fluid is to be distributed uniformly at the inlet of each fluid side and throughout the core. However, in practice, flow mal-distribution is more common and can significantly reduce the heat exchanger performance. The flow and heat transfer are simulated by the k-$\varepsilon$ standard turbulence model. Moreover, the simulation contacted flow maldistribution in a PHE with 6 channels.

• Journal of Environmental Science International
• /
• v.29 no.3
• /
• pp.273-282
• /
• 2020

Residence time is defined as the time taken for a material in a system to leave the system. The residence time characteristics in shellfish aquaculture determine the dispersion of excretion from aquaculture farms, along with the supply of food by seawater exchange. In this study, we estimated the spatial distribution of average residence time in the shellfish farming area using a particle tracking model. As a result, a relatively short average residence time of about 20 days or less was calculated in most areas, but an average residence time of more than 40 days was calculated in the inner areas. Relatively long average residence times were calculated along the west coast compared to the east coast, with the longest average residence time of more than 50 days in the northwestern areas. It can be inferred that the disturbance of the benthic ecosystem caused by shellfish farms is likely to be large because of the relatively weak dispersion of excrement from shellfish farms located on the west coast, especially in the northwest region. This distribution of average residence time is important for understanding the potential effects of seawater exchange on the environmental sustainability of shellfish farms, along with the seawater circulation characteristics of Jaran Bay.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.11
• /
• pp.27-36
• /
• 2010

This study was conducted to evaluate physicochemical parameters; temperature, pH, C/N ratio, water content, organic contents and volume in a pilot-scale(capacity : $100m^3$) ultra thermophilic aerobic composting. There were three types input: municipal wasted sludge, livestock manure and slurry, and food waste produced in Jung-Eb city. Each target material was carried out by the first fermentation(organic waste + seed culture) and the second one(organic waste + seed culture + recycle compost), respectively. During composting, only with supply of air and mixing, the temperature increased $90{\sim}105^{\circ}C$ after every mixing in both periods. The changes of pH, $O_2$, $CO_2$ and $NH_3$ represented typical organic decomposition pattern by microorganisms. Also, all other physicochemical parameters of ultra thermophilic aerobic composting process showed similar or better performance than these of general aerobic composting. Heavy metal concentration of fermented compost adapted to compost fertilizer regulation standard in the heavy metal and hazardous analysis.

• Horticultural Science & Technology
• /
• v.29 no.1
• /
• pp.61-67
• /
• 2011

Barley (Hordeum vulgare L.) sprouts are a vegetable commonly used as a functional food material due to its high vitamin C concentration and antioxidant activity. In this experiment, we measured the changes in the antioxidant activity of several barley cultivars as well as in the concentrations of related compounds such as ascorbate and glutathione upon treatment with UV-B or salicylic acid (SA). The six barely cultivars were grown in a plant growth chamber (25/$18^{\circ}C$, 14/10 h, 200 ${\mu}mol{\cdot}m^{-1}{\cdot}s^{-1}$, 70% relative humidity) for 10 days. All barely cultivars showed different 1, 1-diphenyl-2-picryl-hydrazyl (DPPH) scavenging activities, which were increased by UV-B treatment and not by SA treatment. The changes in ascorbate concentrations were correlated with DPPH scavenging activity in both the treatments, suggesting that the antioxidant activity in barley sprouts was mainly dependent on ascorbate concentration. Furthermore, changes in ascorbate concentration showed similar tendencies to changes in free sugar concentration, especially glucose and sucrose, in both treatments. On the other hand, the concentrations of glutathione and cysteine highly increased by SA treatment, representing different tendencies compared to the DPPH scavenging activity and ascorbate concentration. 'Donghanchal' cultivar showed comparatively higher antioxidant activity, both constitutively and inducingly by UV-B treatment, with its higher concentrations of ascorbate and glutathione. These results suggest that barley sprouts could be used as a health-functional vegetable, contributing to the overall supply of antioxidant and sulfur-containing organic compounds.

• Journal of Climate Change Research
• /
• v.2 no.3
• /
• pp.191-201
• /
• 2011

This study investigates how green infrastructure, including natural and open space such as forests, rivers, parks, and streets, could effectively counteract climate change in terms of mitigation and adaption, respectively. As a result, green infrastructure, such as forests, parks, vegetable gardens, roof gardens, pedestrian walkways, bike lanes, etc, could effectively mitigate climate change: 1) Carbon storage and sequestration; 2) Fossil fuel substitution; 3) Material substitution; 4) Food production 5) Reducing the need to travel by car. Secondly, green infrastructure, such as rivers, tree-lined streets, farmland, wetlands, dunes, wind ways, etc, could adapt to climate change: 1) Managing high temperatures; 2) Managing water supply; 3) Managing ravine flooding; 4) Managing costal flooding; 5) Managing surface water; 6) Reducing soil erosion; 7) Helping other species to adapt.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.1
• /
• pp.39-52
• /
• 2021

The global water shortage is getting more attention by global climate change. And water demand rapidly increases due to industrialization and population growth. Desalination technology is being expected as an alternative water supply method. Desalination technology requires low energy or maintenance costs, making it a competible next generation technology, with examples such as forward osmosis (FO), membrane distillation (MD), capacitive deionization (CDI), and electrodialysis (ED) to compete with reverse osmosis (RO). In order to identify recent research trends in desalination technologies (FO, MD, RO, CDI, and ED) between 2000-2020, a bibliometric analysis was conducted in the current study. The number of published papers in desalination technology have increased in Desalination and Journal of Membrane Science mainly. Moreover, it was found that FO, MD, RO, CDI, and ED technologies have been applied in various research areas including electrochemical, food processing and carbon-based material synthesis. Recent research topics according to the desalination technologies were also identified.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.10
• /
• pp.45-53
• /
• 2016

At present, coffee consumption amount is annually on the rise in Korea, which results in about 0.27 million tons of coffee waste annually. They are mostly classified as food waste and deserted with moisture contained, being a serious environmental issue. Existing slope greening techniques, which are vegetation based soil-media hydroseeding measures, have problems such as lack of coherence, dryness or lack of organic matters. Therefore in order to assess usability of Spent Coffee Ground (SCG), medium-to long-term growth test was conducted under the indoor and outdoor conditions. According to the result of growth test, when SCG was mixed with existing base materials, moisturizing power increased and organic matter content was reinforced, promoting germination and growth in a medium term. Among others, under the condition when supply of water was discontinued, withering rate was lower than existing base materials and diverse phenomena resulting from lack of nutrition decreased. Therefore, SCG as a waste organic matter with abundant nitrogen has the characteristic of inhibiting early growth but was found to have a quality favorable to long-term growth resulting from water containing ability and the supply of organic mater and is judged to be a material to replace or complement existing base materials.

• Culinary science and hospitality research
• /
• v.19 no.5
• /
• pp.158-169
• /
• 2013

Finespotted flounder, used for a representative raw fish in spring, is considered comparatively difficult to breed, which causes small Olive flounder and Stone flounder from China, similar kinds of flounders, to appear on the market for sale under the name of 'Finespotted flounder.' The reason lies under the considerations that small Olive flounder and Stone flounder from China are relatively lower priced and in higher supply and demand, being difficult to distinguish from Finespotted flounder when sliced with bones. Thus, the purpose of our thesis is to distinguish Finespotted flounder from similar kinds of fish analyzing the lipid content in slices of raw fish and SDS-PAGE(sodiumdodecylsullipide-polyacrylamide gel eletrophoresis). Upon comparing the main components between sliced Finespotted flounder and similar kinds of fish, such as small Olive flounder and Stone flounder from China, we found that there are no noticeable differences among them in moisture content, and little, if any noticeable differences, in crude protein and ash content(P>0.05). Based on these analyses, we have conclude that commercial raw fish restaurants sell small Olive flounder and Stone flounder under the name of Finespotted flounder. However, a variety of factors have an effect on our analysis, such as the individual characteristics of fish and a seasonal variation. The aim of our analysis is to enhance more accurate distinction criteria, although some fish kinds can be discerned with our present technique of examining lipid content and SDS-PAGE. Through more sophisticated analyses developed by consistent research, we look forward to attaining more accurate techniques for discerning between Finespotted flounder and different kinds of similar fish.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.985-994
• /
• 2018

Bio-heavy oil for power generation is a product made by mixing animal fat, vegetable oil and fatty acid methyl ester or its residues and is being used as steam heavy fuel(B-C) for power generation in Korea. However, if the fuel supply system of the fuel pump, the flow pump, the injector, etc., which is transferred to the boiler of the generator due to the composition of the raw material of the bio-heavy oi, causes abrasive wear, it can cause serious damage. Therefore, this study evaluates the fuel characteristics and lubricity properties of various raw materials of bio-heavy oil for power generation, and suggests fuel composition of biofuel for power generation to reduce frictional wear of generator. The average value of lubricity (HFRR abrasion) for bio-heavy oil feedstocks for power generation is $137{\mu}m$, and it varies from $60{\mu}m$ to $214{\mu}m$ depending on the raw materials. The order of lubricity is Oleo pitch> BD pitch> CNSL> Animal fat> RBDPO> PAO> Dark oil> Food waste oil. The average lubricity for the five bio-heavy oil samples is $151{\mu}m$ and the distribution is $101{\mu}m$ to $185{\mu}m$. The order of lubricity is Fuel 1> Fuel 3> Fuel 4> Fuel 2> Fuel 5. Bio-heavy oil samples (average $151{\mu}m$) show lower lubricity than heavy oil C ($128{\mu}m$). It is believed that bio-heavy oil for power generation is composed of fatty acid material, which is lower in paraffin and aromatics content than heavy oil(B-C) and has a low viscosity and high acid value, resulting in inhibition of the formation of lubricating film by acidic component. Therefore, in order to reduce friction and abrasion, it is expected to increase the lubrication of fuel when it contains more than 60% Oleo pitch and BD pitch as raw materials of bio-heavy oil for power generation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.444-454
• /
• 2016

This study was designed to examine the characteristics of sawdust and cocopeat bedding materials, including physicochemical properties (Exp. I) and on-farm trial (Exp. II). In Exp. I, the proportion of particle size was in the order of sawdust>cocopeat India>cocopeat Vietnam (p<0.05), and cocopeat contained higher proportion of small particles ($250{\mu}m$+below $250{\mu}m$) than sawdust, causing a dust production problem. Bulk density was cocopeat India>cocopeat Vietnam>sawdust (p<0.05), thus cocopeat treatments showed 4.4 times higher bedding cost than sawdust. The water absorption rates were 702.0% in cocopeat India, 678.3% in cocopeat Vietnam, and 444.0% in sawdust, showing cocopeat had approximately 1.5 times higher water absorption rate than sawdust. Moisture evaporation rates after 12 h of air blowing (2.00 m/s) were higher (p<0.05) in cocopeat Vietnam (80.4%) than sawdust (71.2%) and cocopeat India (72.8%). In vitro ammonia emissions were higher (p<0.05) in sawdust ($2.71mg/m^2/h$) than cocopeat India ($1.59mg/m^2/h$) and Vietnam ($1.22mg/m^2/h$), and total ammonia emissions were higher (p<0.05) in sawdust ($37.02mg/m^2$) than cocopeat India ($22.51mg/m^2$) and Vietnam ($13.60mg/m^2$). In Exp. II, an on-farm trial was conducted with 48 Hanwoo cattle in 16 pens using the same bedding materials as in Exp. I, with fan (blowing 2.00 m/s) and no fan treatments, and feed bunk side (FB) and water supply side (WS) within a pen (4.5 m, $width{\times}9.0m$, length). Beddings were replaced with fresh bedding materials when moisture concentrations were over 65%. No interactions among treatments were detected for moisture concentration and increment rates, and ammonia concentrations, but a significant effect was observed (p<0.01) for each of the treatments. Both concentrations and increment rate of moisture were higher (p<0.01) in the beddings without fan than with fan. Moisture concentrations and increment rate within a pen were also higher (p<0.01) in FB than WS. Thus, the whole no-fan-FB and sawdust-fan-FB were replaced with fresh bedding material between 4 to 5 experimental weeks. The ammonia concentrations and pH of beddings were not significantly different among treatments. Therefore, using cocopeat bedding with a blowing fan can extend twice the bedding utilization period, and WS within a pen showed twice the bedding-life compared to FB. Despite the outstanding characteristics of cocopeat compared with sawdust, using cocopeat as an alternative for sawdust bedding is not recommended for cattle management, considering it has 4.4 times higher bedding cost and a dust production problem.