• Journal of the Korean Society of Costume
• /
• v.52 no.2
• /
• pp.103-113
• /
• 2002

Heungdukwang'(興德王) costume ordinance(834A.D.) is a very important written historical record because it reveals Tongil Shills's(統一新羅) costume. But among the clothing pieces that appeared in Heundukwang'(興德王) costume ordinance, classification of Naeoe(內衣) and Danoe(短衣) is not clear. This study focuses on the categorization of Naeoe(內衣) and Danoe(短衣). Upper garments included among costume ordinance were Pyooe(表衣), Naeoe(內衣) and Danoe(短衣), Pyooe(表衣) and aeoe(內衣) were unisex, while Danoe(短衣) was worn only by women excluding the lower class. Pyooe(表衣) is applicable to Po(袍), Naeoe(內衣) is aplicable to Yu(유). Shilla'(新羅) upper garments appearing in visual records are as follows: -With the exception of Pyooe(表衣), the length of men's upper garments were between hip and knee length. These upper garments featured V-neck and round neck styles with the left side of the garments folded over the right side. -Again excluding Pyooe(表衣), women's upper garments were similar to men's upper garments having V-neck and round necklines. We know this to be true from the relics found during the excavations of Hwangsungdong and Yonggangdong, as well as from the women in the stone reliefs of Sangju. Although we know the shape of necklines. the length of upper garments remained a mystery because women of that tome tucked in their upper garments into the skirts and/or wore an over garment. However a clay doll found around Bulguksa(佛國寺) wearing a knee length garment with V-neck. The upper garment was opened in the front and was worn over another garment with same length and round neckline. At that time, The upper garments found in China and Japan. were not much different than those found in Shilla (新羅). They also included garments that were waist length, had peach-shaped necklines, or were worn over head. Shilla's(新羅) traditional upper garment was between hip and knee length, but with the introduction and influence of Chinese costume. upper garments with a length coming down to the high waist line began to appear. In addition to Chinese influence, because Shilla's(新羅) women wore the upper garment first and then the lower garment, a long upper garment was not necessary. These shorter upper garments came to be known as 'Danoe(短衣)'When we perceive clothing. we look at silhouette first and then the details. Silhouette is much determined by length and neckline or the front of the garment determines the details, So we need to attention to the basis of ancient dress classifications. These classifications were according to first length [Po(袍), Yu(유)] and then neckline [Danryoung(團領), Jingryoung(首領)]. As a result. Naeoe(內衣) and Danoe(短衣) are classified by the length. The length (內衣) was between hip and knee length while Daneoe(短衣) was waist length. Danoe(短衣) was worn by putting the bottom of it inside skirt naeoe(內衣) was worn over a skirt or plant. But both had V-neck and round neck styles, and styles with the left side of the garments folded over the right side.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.1-10
• /
• 2013

In this paper, a broadband planar monopole antenna for multi-band services is proposed. The physical size of the proposed antenna is miniaturized by folding a rectangular loop. And a resonance point in the 3.9 GHz band is reduced by a coupling phenomenon with the central part of the T-shaped patch and the folded rectangular loop. In addition, the T-shaped patch is inserted to the rectangular shaped monopole antenna due to deriving the broadband frequency characteristics. The frequency characteristic is optimized by adjusting the gap and length of the folded rectangular loops and a transverse diameter of the T-shaped patch. The antenna dimensions including the ground plane are $40{\times}60{\times}1.6mm^3$. It is fabricated on the FR-4 substrate(${\epsilon}_r$=4.4) using a microstrip line of $50{\Omega}$ for impedance matching. In the measured result, the bandwidth corresponding to the VSWR of 2:1 is 162 MHz(815~977 MHz) and 2,530 MHz(1.43~3.96 GHz). For analyzing the human effect by the proposed antenna, 1 g and 10 g averaged SARs are simulated and measured. As the simulated results, 1 g-averaged SAR is 1.044 W/kg, and 10 g-averaged SAR is 0.718 W/kg. This result are satisfied by the SAR guidelines which are 1.6 W/kg(1 g-averaged) and 2.0 W/kg(10 g-averaged).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.35-49
• /
• 2016

Dopo was the clothing of the Joseon period, which had a strong value of Confucianism. Apart from the kings and princes, government officers and Confucian literati wore Dopo as their official clothing and the uniform. The basic form of Dopo had the straight collar similar to Jikryeong. The difference is the shape of a Mu, which was fixed inside or on the back section along the side line of the front section and made two flaps on the back section. The clothing found in the tombs of Bae Cheonjo (1532~?) are from the mid-16th century to the early 17th century with the clothing style of the early Joseon period. The outer collar of all clothing was the shawl collar except for the Sibok and the inner collar was sewn to this. Two items had square tray collars, which were folded in half and sewn inside in half. The sleeve had a straight inseam from the armhole and its end around the wrist was round and wide. The carp-shaped inseam of the sleeve and wide sleeve indicated a change of sleeve shape. The shapes of the collars and the wide overlapped section of the dual collars demonstrated the shapes of the initial outer robes. The man's outer coats with wide sleeves were mostly cotton-quilted clothing. As described above, this paper examines the basic shapes of outer robes including Sibok, Jikryeong and man's outer coats on the basis of the clothing and artifacts from the tomb of Bae Cheonjo (1532~?) and examined the shapes, composition and features of Dopo. This paper aims to improve awareness of the wisdom and spirit of ancestors in life hidden in the sewing of the three Dopo items and on the importance of historical research.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.704-709
• /
• 2007

In this paper, a CPW band-pass filter with a rejection band is proposed for UWB(Ultra-Wideband) communication systems. The proposed filter has a band-pass characteristic of wide-band by inserting only a slot in $50{\Omega}$ transmission line. To obtain the band-rejection function at WLAN frequency band($5.15{\sim}5.725GHz$), the designed filter is combined with folded slot resonators on the ground plane of the CPW structure. The fabricated CPW band-pass filter shows a compact size of $15.35{\times}13.60mm$, a wide passband of 2.8 GHz to 9.8 GHz and the narrow stop-band of 5.15 GHz to 5.71 GHz for 3-dB bandwidth. Also, the measured group delay is less than 400 psec throughout the operation frequency band except the rejection band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.828-833
• /
• 2007

A small monopole antenna with a novel impedance matching structure is proposed in this paper. The proposed antenna is designed for W-LAN(IEEE 802.11b). The antenna design concept is based on a ${\lambda}/8$ folded monopole antenna with a self-impedance matching structure. The size of the proposed antenna is smaller than the resonant length, thus the impedance at the terminal of the antenna becomes very capacitive. To compensate fur this impedance mismatching, the proposed antenna employs a novel self-impedance matching structure. The self-impedance matching structure is located on the top of the antenna; it improves the impedance matching and ultimately the efficiency of the antenna. The measured results of the proposed antenna show reasonable agreement with prediction.

• Economic and Environmental Geology
• /
• v.16 no.2
• /
• pp.111-123
• /
• 1983

The studied area is situated in tho southern part of the Ogcheon fold belt, where the "Ogcheon Group" is widespread with Jurassic and Cretaceous intrusions. The regional stratigraphy may be divided into three formations, the lower pebble bearing phyllitic, the middle dark grey phyllitic, and the upper black phyllitic formations. For the purposes of the present study, the area has been partitioned to three structural subareas based on major fold axes and fault line. The main subjects of the research have been discussed from two different points, multiple deformation and minor-micro fold styles. The former is analyzed by pebble elongation, folding and lineation in a pebbly formation as well as schistosity, crenulation cleavage and crenulated lineation in the phyllitic formation. The later describes the characteristic features of fold style in each formation and structural subarea. Although minor fold axes within broad pelitic rocks usually tend to trend northeast and to plunge northward, most of these were probably formed by two stages, first a similar fold phase and second a kink fold phase. Measured structural elements indicate that crenulation cleavage in phyllite formed parallel to fold axes of folded pebble followed a NE phase of first deformation and a fold axes of pebbles diagonal to bedding of phyllite are represented by a NW phase of a second deformation. Microscopically, quartz and mica grains form a micro fold enabling one to establish tectonic levels which occur in different deformation modes in each stratigraphic sequence. Microtextures such as crenulation cleavage, kink band, aggregate band of mica and pressure shadows of porphyroblast of quartz related to qarnet and staurolite may suggest the time relation of crystallization and tectonism. The result of this study may conform that three deformation phase, NE first phase-NE second phase-NW phase, occurred in the area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.382-389
• /
• 2019

A novel folding process is proposed using a repeated cold-die forging and annealing to form a sterling silver ring. Sterling silver plate was cut into a doughnut shape, and lattices with 0.43-mm line-width were imprinted on it. The sample was folded by forging using dies with slopes of $45^{\circ}$, $60^{\circ}$, and $75^{\circ}$ and annealing. For comparison, samples were also fabricated without annealing. Strain was identified by measuring the length of lattices. Vernier calipers, a Vickers hardness tester, an optical microscope, and a UV-VIS colorimeter were used to determine the size, hardness, microstructure, and body color. Without annealing, cracks occurred. However, successful deformation was possible when annealing was used. The results of macro strain measurements show that the outer diameter and width decreased, while the inner diameter and thickness increased after the final process. The maximum strain was increased 0.128 toward the parallel direction. The Vickers hardness decreased after annealing and increased after the folding process. The microstructure results showed that the grain size increased after annealing but decreased after folding. The color difference based on the Lab index was under 10 for all processes. Eventually, a doughnut-shaped silver plate was successfully deformed into a ring shape by the folding process.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.4
• /
• pp.254-270
• /
• 2000

To clarify the geological structure of North Sobaegsan Massif in the Sangunmyeon area, Bonghwagun, Korea, where the Yecheon Shear Zone passes and the NE-SW and E-W trending structural lineaments are developed, the rock-structures of its main constituent rocks(Precambrian Won-nam Formation and Mesozoic Hornblende Granite) were examined. In this area, the geological structure was formed at least by four phases of deformation after the formation of gneissosity or schistosity of the Wonnam Formation: one deformation before D2 ductile shearing related to the for-mation of the Yecheon Shear Zone and two deformations after that. The NE-SW and E-W trending structural lineaments were formed by a giant open or gentle type of F4 fold, and their trends before D4 deformation are interpreted to be parallel to the orientation(ENE-WSW trend) of folded surface in the F4 hinge zone. The structural features of Dl-D3 deformations and their relative occurrence times are as follows. Dl deformation is formative period of the boudin structures and ENE-WSW trending isoclinal folds with sub-horizontal hinge lines and steeply inclined axial surfaces. D2 deformation is that of the mylonite foliation, stretching lineation and Z-shaped asymmetric folds related to top-to-the ENE dextral strike-slip shearing on the distinct foliations of Wonnam Formation(after intrusion of Mesozoic Hornblende Granite). D3 deformation is that of the ENE trending S-shaped asymmetric folds with sub-horizontal hinge lines and axial surfaces related to normal-slip shearing on the distinct foliations. It is expected that the result will be contributed to as valuable data for interpreting the tectonic evolution of the North Sobaegsan Massif and the Northeast Ogcheon Belt whose tectonic lineaments are changed from NE-SW to E-W trends at the Sindong-Bonghwa line.

• Korean Journal of Veterinary Research
• /
• v.38 no.1
• /
• pp.147-159
• /
• 1998

A survey of the internal parasites in 115 fishes of Ophicephalus argus was carried out in Kyungpook province during the period from January 1995 to November 1997. A species of trematode from the stomach and a species of nematode from the caeca of the fishes was discovered respectively. The trematode was identified as Azygia hwangtsinyi (Tsin, 1993) and the nematode as Pingus sinensis ($Hs\ddot{u}$, 1993). The fluke was pressed at thick of 0.1mm~0.2mm between slide glasses and fixed in 70% ethyl alcohol solution. The fluke was washed with tap water after fixation and stained with hematoxylin-carmin and mounted in balsam through routine methods. The nematode was fixed in 5% formalin solution and mounted with lactophnol or glycerine jelly. Morphology : Arygia hwantsinyi ; The fluke is elongate body with approximately parallel margins and rounded extremities in pressed preparations(Fig 1). The cuticle is unarmed. The oral sucker is ventro-subterminal in position. The ventral sucker is slightly smaller than oral sucker and positioned at 14.2% of body length from the oral sucker. The cirrus sac and genital pore is in mid-ventral line, slightly anterior to the ventral sucker. The oral sucker is succeeded by a well developed muscular pharynx. It is succeeded by a short inverted Y-shaped oesophagus. The inner wall of oesophagus is consisted of many fine folded membrane. The fine tubes of esophagus pass into the intestinal heads which are distended and presented a marked borderline between the fine tube and intestinal heads. The Intestinal heads start at level of pharynx and pass caudad in a zigzag course to end quite near caudal margin. The uterine coils occupy the intercecal area between the level of the cephalic margin of the ovary and about the level of the ventral sucker. The uterus is filled with many eggs. The testes are round or oval and placed one behind the other generally a little diagonally. The posterior testis is placed at level of 75.1% of body length. The ovary is oval, placed ahead the anterior testis. The shell gland not discernible outline is contacted with ovary ahead it. The vitelline glands are consisted of small oval vesicles. The vesicles occupy extracecal regions and between a little posterior of the ventral sucker and near caudal margin. Pingus sinensis : Female ; The cuticle is smooth and the cervical alae are well developed. The mouth opening is small, triangular, and without lips. The anterior end bears four sub-medial papillae. The oesophagus is divided into a muscular and glandular portion. The nerve ring is situated just at the junction of the muscular and glandular portions of the oesophagus. The vulva which has a prominent flap, is placed behind the middle of the body about one-third of the length of the worm from the posterior extremity. The vagina is strongly muscularised and after running anteriorly about $68{\mu}$, divides itself into two broad uterine tubes with an anterior and a posterior one. There are a few eggs in the uterine tubes. The tail is slender, straight and pointed. The ovary extends almost to the posterior extremity. Male : Male is smaller than female. The tail is pointed, curved and carrying well-developed caudal alae. A prominent muscular precloacal sucker is characteristic. The spicules are equal and short. There are four pairs of pedunculated pre-anal papillae, of which the most anterior pair are situated just at the level anterior to the muscular sucker. Two pairs of pedunculated papillae are present before the anus. There are five pairs of post-anal papillae of which the most anterior pair and the second counted from the posterior end are ventral and more marked than the ones which are situated laterally.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.4-21
• /
• 2018

This paper reviewed the legitimacy of the name of those sixteen pieces of hat artifacts known in Korean as pyeongjeongmo and currently housed by the National Palace Museum. This was undertaken in order to rectify the error of calling them pyeongjeongmo. Also, the paper suggested pyeongjeongmo's production method to apply representation of the artifacts or production of Joseon officials' hats as representation of ritual costumes in the royal court. The name pyeongjeongmo originated from pyeongjeonggeon. Gyeongguk Daejeon recorded that noksas wore yugak-pyeongjeonggeon and seoris wore mugak-pyeongjeonggeon, but the pyeongjeongmo artifacts housed in the National Palace Museum have been found irrelevant to those pyeongjeonggeons put on by both noksas and seoris. Rather, they has been confirmed as corresponding to dugeon or jogeon worn by byeolgams or suboks who served at the palace of the crown prince or princess. Through the investigation of the artifacts, the researchers could find out the tailoring and sewing methods, the finished look, and the folding manner of pyeongjeonggeon. Although the structure of pyeongjeonggeon was generally consistent, the frontal look was slightly different depending on the folding manner, resulting in three distinguished types of pyeongjeonggeon. Regardless, the pyeongjeongmo was made with one piece of fabric by a flat tailoring and folding method to create a three-dimensional hat. The finished shape appeared low in the front and high in the back side structure. The head girth was 55~59 cm, and the height was 19.4~21.5 cm. To make it with one piece of fabric, the head girth part was tailored in the same direction as the strands. Based on the artifact Changdeok 23820, this paper has also suggested a finished reproduction through the processes of preparing the materials, mounting, making the center ornaments, sewing and folding. The tailoring was completed with black silk fabric which was cut in a unique shape designed in advance, and hemp fabric which was mounted to the former. The top part of the head was finished with black threads, and the center line at the back was fixed with decolored cotton threads by blanket stitches with 3.5~4 cm intervals. Bamboo strands were inserted in the inside of the front-folded part, which then was fixed by patterned stitches with white cotton thread. At the back, a small bamboo clasp was attached so that one can lock it to the headband and prevent it from falling off.