• Journal of Biomedical Engineering Research
• /
• v.28 no.6
• /
• pp.798-802
• /
• 2007

The synthetic focusing in the ultrasonic imaging systems has been formed in the way that one element transmits a circular wave and receives an echo signal. The amplitude of the signal transmitted from one element is too small to propagate a long distance so that the SNR(Signal to Noise Ratio) is very low in an image obtained by the synthetic focusing. To solve this problem, a defocusing method which uses several elements has been proposed. In this method, the SNR is improved due to using several elements to transmit the circular wave. But if the number of transmitting elements increases, the phase distortion is severe in the defocusing method. In this paper, we propose a new method that can generate a circular wave using a lot of elements without phase distortion. At first, we generate limited plane waves with different propagation angles and then superpose them to make a circular wave. We show that the circular wave can be used to improve SNR in the real-time 3D ultrasonic imaging as well as the synthetic focusing through computer simulation and experiments.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.6
• /
• pp.569-577
• /
• 2010

Nonplanar surface geometries of components are frequently encountered in real ultrasonic inspection situations. Use of rigid array transducers can lead to beam defocusing and reduction of defect image quality due to the mismatch between the planar array and the changing surface. When a flexible array is used to fit the complex surface profile, the locations of array elements should be known to compute the delay time necessary for adaptive heam focusing. An alternative method is to employ the time reversal focusing technique that does not require a prior knowledge about the properties and structures of the specimen and the transducer. In this paper, a time reversal method is applied to simulate beam focusing of flexible arrays and imaging of point-like defects contained in specimens with nonplanar surface geometry. Quantitative comparisons are made for the performance of a number of array techniques in terms of the ability to focus and image three point-like reflectors positioned at regular intervals. The sinusoidal profile array studied here exhibits almost the same image quality as the flat, reference case.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.1
• /
• pp.38-48
• /
• 2002

Theoretical development to generate the directional extreme waves in model basin is established based on wave focusing method. The effects of associated parameters, such as the directional range, frequency width, and center frequency, are investigated in terms of wave focusing efficiency. The two different spectral models of constant wave amplitude and constant wave slope are applied to control the wave characteristics. The wave packets simulated by theory are compared with numerical results based on Boussinesq equation and FEM. Both controls of direction and frequency spectrum are essential to focus directional waves effectively. It is noticed that wave focusing ability depends on the frequency bandwidth of spectrum rather than center frequency, and both spectral models with same parameters result in the equivalent efficiency of wave focusing.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.65-71
• /
• 1984

The design formular of optical focusing systems cannot be applied to ultrasonic B scanners, which use broadband pulses instead of continuous wave. In this paper, a calculation method is studied for analyzing the propagation of ultrasonic broadband pulse excited by ultrasonic array transducers. Using the results, seveial design parameters such as the number of transducer elements, delay time, and the focal point are determined to obtain high resolution in the ultrasonic dynamic focusing system. A dynamic focusing system with low-noise switching characteristics; which attains lateral resolution of 2-3mm all along the axial direction up to 18 cm with a 3.5 MHz linear array transducer, was implemented.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.6
• /
• pp.50-58
• /
• 2009

Micro laser fabrication techniques can potentially be used for the manufacture of microstructures on the thin flat surfaces with large diameter that are frequently used in semiconductor industries. However, the large size of wafers can cause the degraded machining accuracy of the surface because it can be tilted or distorted by geometric errors of machines or the holding fixtures, etc. To overcome these errors the off-line focusing error compensation method is proposed. By using confocal autofocus system, the focusing error profile of machined surface is measured along the pre-determined path and can be compensated at the next machining process by making the corrected motion trajectories. The experimental results for silicon wafers and invar flat surfaces show that the proposed method can compensate the focusing error within the level of below $6.9{\mu}m$ that is the depth of focus required for the laser micromachining process.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.581-584
• /
• 2008

A generation of a particle beam is the key technique in a flow cytometry that measures the fluorescence and light scattering of individual cell and other particulate or molecular analytes in biomedical research. Recent methods performing this function require a laborious and time-consuming assembly. In the present work, we propose a novel device for the generation of an axisymmetrical focusing beam of microparticles (3-D focusing) in a single capillary without sheath flows. This work uses the concept that the particles migrate toward the centerline of the channel when they lag behind the parabolic velocity profile. Particle focusing of spherical particles was successfully made with a beam diameter of about 10 ${\mu}$m. Proposed device provides crucial solutions for simple and innovative 3-D particle focusing method for the applications to the MEMS-based micro-flow cytometry. We believe that this device can be utilized in a wide variety of applications, such as biomedical/ biochemical engineering.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.3
• /
• pp.229-238
• /
• 2014

This study comparatively analyzed the speed and segment coordination characteristics of Taekwondo hand techniques, while different attention focusing strategies were utilized. Ten elite Taekwondo poomsae athletes participated, and three different strategies (no focus, target focus, body focus) were utilized in random order. The hand velocity and upper body segment coordination characteristics were analyzed, with the following results. First, the maximum magnitudes of the hand velocity differed between the focus conditions for the Araenaereomakgi and Momtongjireugi techniques. Second, the angular velocity and kinetic energy transfer patterns of the segments differed between the focus conditions, and in the case of the body focus condition, the movement was more correct according to the theory. Third, the shoulder and elbow joint coordination patterns differed between the focus conditions, with more efficient movement shown with the body focus condition. In conclusion, we confirmed the potential of effectively using an attention focusing strategy in a taekwondo teaching situation. However, the effect on the movement coordination and results of the movement could be changed by a difference in the cue provided or the type of the task. In addition, depending on the task, the attention focusing strategy could affect the efficiency of the movement. Therefore, coaches and masters of Taekwondo will have to constitute determine the appropriate attention focusing cues based on the task.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.418-429
• /
• 2011

Researches using time reversal acoustics (TRA) for impact localization have been paid attention to recently. Dispersion characteristics of Lamb waves, which restrict the utility of classical nondestructive evaluation based on time-of-flight information, can be compensated through the application of TRA to Lamb waves on a plate. This study investigates the spatial focusing performance of time reversal Lamb waves on a plate using finite element analysis. In particular, the virtual sensor effect caused by multiple wave reflections at the boundaries of the plate is shown to enable the spatial focusing of Lamb waves though a very small number of surface-bonded piezoelectric (PZT) sensors are available. The time window size of forward response signals, are normalized with respect to the number of virtual active sensors. Then their effects on the spatial focusing performance of Lamb waves are investigated.

• Journal of the Korean Society of Food Culture
• /
• v.19 no.4
• /
• pp.392-398
• /
• 2004

The purposes of this study were to: a) investigate how other countries brought up their traditional food into the commercial market for tourists b) analyze present marketing status of the Korean traditional food in dealing with foreign tourists as consumers. Present marketing status of the overseas and domestic tourism products focusing on traditional foods was investigated through literature reviews and face-to-face in-depth interviews conducted with professionals in tourism business. As a result, the foreign tourism products focusing on traditional foods were diverse and these products were representative of the regional heritage brought together in an effect to increase understanding of traditional foods. In case of the tourism products focusing on Korean traditional cuisine, the popular programs were 'Making Kimch', 'Making ricecake' and 'Making Bibimbap' in which tourists participated have expressed great satisfaction. The results of this study would be used as an important data in developing unique tourism programs focusing on Korean traditional cuisine attracting foreign tourists.

• The Korean Journal of Pesticide Science
• /
• v.3 no.2
• /
• pp.86-89
• /
• 1999

A series of methanesulfonamide (I a- I g) and phenylhydrazone (IIa-IIh) derivatives were synthesized and their fungicidal activity in vitro against gray mold (BC: Botrytis cinerea), phytophthora blight (PC: Phytophthora capsici) and sheath blight (RS: Rhizoctonia solani) were measured by agar dilution method. The (II) deriviatives showed higher activity than ( I ) derivitives. And the relative orders of the fungicidal activity are BC=PC>RS, Among these compounds, 3-chlorophenyl substituent, IIg showed the most highest activity ($pI_{50}=3.96$) against PC. From the parameter focusing technique, major factors on the activity were ovality, polar and logP constant and so on.