• 폴리머
• /
• 제37권6호
• /
• pp.685-693
• /
• 2013

반응 컴파운딩으로 개질한 poly(lactic acid)를 초임계 $CO_2(scCO_2)$를 사용하여 발포하였다. 발포는 $105{\sim}135^{\circ}C$와 12~24 MPa 범위에서 실시하였다. 발포체의 발포 배율과 셀 구조는 온도, 압력 및 감압 속도와 같은 발포 조건에 크게 영향을 받았다. 발포 온도와 포화 압력 증가에 따라서 발포 배율은 증가하다가 감소하였으며, 그 결과로 $120^{\circ}C$ 발포 온도 및 20 MPa 포화 압력에서 최대 발포 배율이 얻어졌다. 감압 속도가 느린 경우에는 셀이 장시간 동안 팽창함으로써 보다 큰 셀 구조를 가지는 발포체가 얻어졌다.

• Elastomers and Composites
• /
• 제37권3호
• /
• pp.159-169
• /
• 2002

본 연구에서는 acrylonitrile-butadiene rubber(NBR)/타이어고무분말(Ground Tire Rubber, GTR) 블렌드계의 발포체를 제조하고, 이들의 난연성을 증진시키고자 하였다. 그 결과 난연제 중 유기인 화합물 및 무기금속 수산화물의 함량 증가에 따라 난연성이 증진됨을 확인할 수 있었다. 유기인 화합물의 경우 함량 증가에 따라 한계산소지수(LOI)가 증가하고, 열 방출 속도(HRR) 및 유효 연소열(EHC)이 감소하는 반면에 CO 방출률(량) 및 역기밀도가 증가함을 확인 할 수 있었다. 무기금속 수산화물은 함량 증가에 따라 난연효과 뿐만 아니라 열기발생 억제효과를 동시에 가짐으로써 LOI, HRR, EHC가 유기인 화합물 첨가에서와 같은 경향성을 보여주었지만 CO 방출률(량) 및 연기밀도에 있어서는 유기인 화합물 첨가에서와 상이하게 감소하였다. 그리고 난연성을 판단함에 있어 중요한 변수들인 열 방출속도, 유효 연소열, 무게감소, 한계산소지수간의 상관관계를 확인하였는데, A-HRR과 LOI가 증가함에 따라 질량손실이 각각 증가 혹은 감소하는 뚜렷한 경향성을 확인하였다. 이로써 NBR/GTR의 조성비기 $100{\sim}80/0{\sim}20 wt.%$이고 고무/난연제의 조성비가 $1/1.55{\sim}3.60 wt.%$일 때, 원활한 핵의 생성 및 cell의 성장으로 인해 균일한 closed cell 및 semi-closed cell을 보여주었다. 또한 $225{\sim}250 %$의 발포율을 보이며, 낯은 HRR과 높은 LOI($28.0{\sim}39.3$)를 갖는 난연성 및 발포성이 우수한 발포체를 얻을 수 있었다.

• Elastomers and Composites
• /
• 제38권3호
• /
• pp.251-261
• /
• 2003

본 연구에서는 폐타이어 고무분말 (GTR)과 일부 난연제를 포함한 acrylonitrile-butadiene rubber (NBR) 발포체를 제조하고, 난연 및 발포특성에 GTR이 미치는 영향을 조사하였다. 그결과 고무/난연제의 조성비가 $1/1.95{\sim}3.70 wt%$이며, GTR의 함량이 20 wt% 범위 이내에서 원활한 핵의 생성 및 cell의 성장으로 인해 높은 발포율 ($215{\sim}300 %$)과 균일한 닫힌/반 닫힌 셀(closed/semi-closed cell)을 보여주었으며, 높은 LOI ($29.4{\sim}40.0$)와 낮은 (A)-HRR을 보임을 확인하였다. 또한 GTR의 함량이 증가함에 따라 자체적인 난연 특성으로 인해 LOI가 증가하고, HRR이 감소하는 반면에 (A)-COY는 증가함을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.289-292
• /
• 2001

Aluminium foams, having a closed cell structure, fabricated by applying the powder compact method and an induction heating were studied. The powdered A6061 mixed with the powdered titanium hydride as a foaming agent was hot pressed into a foamable precursor. The resulting precursor was foamed by induction heating up to desired temperature. The effects of the titanium hydride content ($0.3{\~}1.5 wt.\%$), pressing pressure of the foamable precursor material (50-150kN), the forming temperature ($610{\~}690^{\circ}C$) and heating rate during foaming on the expansion behavior of the foam were investigated.

• Design & Manufacturing
• /
• 제9권3호
• /
• pp.24-28
• /
• 2015

Speaking in general terms the form injection process can be described as a new process-variant of already known structural foam molding technology which roots go back to the early sixties. The most limiting factors of already know foaming processes are large cell size and the lack of uniformity of these cells as well and the inability to foam all kinds of plastic materials. In this paper, Process Study on weight change in injection rate during foaming. Experimental conditions were set as the injection speed 50,150,300 and 450 mm/s. The experiments PA, PA+GF, PP, was confirmed that the weight increase to PP+TA.

• 한국건축시공학회지
• /
• 제11권6호
• /
• pp.557-566
• /
• 2011

The surfactants facilitate the formation of foam bubbles under a proper condition and provide stability of foam bubbles by decreasing the surface tension of solutions and increasing the viscosity of foam surface. However, there have been almost no practical data of foam concrete in this regard so far. This study aims to understand the effects of foaming agents such as anionic synthetic surfactant and anionic natural material surfactant on the low density foamed concrete. From the experiment, the vegetable soap of anionic natural material surfactants showed a higher foaming rate, more open pores, slightly lower compressive strength, and a higher permeability coefficient compared to the vegetable soap of anionic synthetic surfactants. It is believed that the natural material surfactants make not only the surface tension of the solution low but also the viscosity of slurry high.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.1046-1050
• /
• 2005

Micro Cellular Plastics create a sensation at polymer industrial for lowering product cost & overcoming a lowering of mechanical intensity. There Is much development from injection molding pans but Extrusion parts is slow. This research is MCPs Extrusion parts, It is basis experiment for Process to make beads that is basis raw material of Package used most by shock mitigative of industry.

• 한국식품영양학회지
• /
• 제2권1호
• /
• pp.18-26
• /
• 1989

The objective of this study was to improved the limited functional characteristics of mungbean whole globulin. The mungbean whole globulin was acylated with succinic and acetic anhydride, and the functional properties of acylated protein were investigated, The results obtained ware as follows. 1. The UV-absorption spectra of acylated whole globulins with that of the succinylated 74% whole globulin as large blue shift of the absorption maximum and minimum wavelength from 275 nm to 269 nm, respectively. 2. The mobility of acylated whole globulin were increased on PAGE pattern, and degree of mobility was particularly remarkable in case of succinylation, 3. The water absorption capacity of whole globulin was increased by acylation. The most increased rate of whole globulin was 174,02% from succinylated 74%. The oil absorption capacity of whole globulin was increased by acylation The most increased rate of whole globulin was 165.41% from acetylated 81.77%. 4. The bulk density of whole globulin was decreased by acylation. and the greater the extent of acylation, the smaller the bulk density. 5. The foaming capacity and stability of whole globulin was increased by acylation, and remarkably high in 74% succinylated whole globulin. In contrast, however, the foaming capacity and stability of native and acylated whole globulin were decreased by heat treatment.

• 한국물환경학회지
• /
• 제26권1호
• /
• pp.81-88
• /
• 2010

This study was conducted to find the capability of comparison of overall oxygen transfer coefficient in the membrane coupled high performance reactor (MPHCR) in treating high organic loading wastewater. Effluent quality had been analyzed while the influent organic loading rate was changed from 2 to $7kg\;COD/m^3{\cdot}day$. The oxygen transfer coefficients had been investigated using two-phase nozzle for operating variables which were internal circulation flowrate (5~8 L/min), air flow rate (0.0125~0.2 L/min), liquid temperature ($10{\sim}20^{\circ}C$), and pure-oxygen flow rate (0.0125~0.2 L/min). The overall oxygen transfer coefficient was increased with flowrate of internal circulation and air and high temperature. Especially, internal circulation flow rate showed distinct effect on overall oxygen transfer coefficient due to an increase of gas holdup and air-liquid contract area by two-phase nozzle. In the high range of organic loading rate from 4 to $7kg\;COD/m^3{\cdot}day$, the removable efficiency of COD was 91%. Conventional activated sludge process usually treat organic loading from 0.32 to $0.64kg\;COD/m^3{\cdot}day$ however, the MPHCR can treat 10 to 20 times higher if it would be compared to the conventional activated sludge process. Foaming problem often happened and caused biomass wash out of the reactor, therefore, the foaming should be controlled for the enhanced operation.

• 폴리머
• /
• 제34권5호
• /
• pp.442-449
• /
• 2010

본 연구에서는 hard segment 함량(%)별로 친수성의 폴리우레탄 프리폴리머를 합성한 후 다양한 발포 혼합 조성액을 이용하여 폴리우레탄 폼을 제조하였다. 그 결과 사슬연장제를 도입한 폴리우레탄 프리폴리머가 도입하지 않은 것에 비해 기계적 물성이 우수하였다. 또한 폴리우레탄 구조에 hard segment 함량(%)을 높임으로써 폴리우레탄의 기계적 물성을 향상시킬 수 있었다. 한편 발포 혼합조성액에서도 F-68, 글리세린, CMC 등의 원료 배합비를 조정함으로써 최종적으로 제조된 폴리우레탄 폼의 기계적 물성과 흡수도, 흡수속도, 모폴로지 등을 조절할 수 있었다. 제조된 폴리우레탄 폼은 세포배양 결과 세포적합성이 우수하였고, 동물실험 결과 대조군인 거즈에 비하여 월등한 창상치유 효과를 보였으므로 창상치료용 소재로서의 적용 가능성이 높음을 알 수 있었다.