• 한국생활과학회지
• /
• 제14권5호
• /
• pp.821-832
• /
• 2005

The purpose of this study is to investigate bathing habits and behaviors, and to find out consumers' needs for washcloth, which in this case refers to Korean exfoliating cloth for bathing purpose. Subjects of this study were females of 20s to 50s living in urban area. Four hundred and twenty-six (426) women were interviewed with a structured questionnaire. Data were analyzed by ANOVA, factor analysis, correlation analysis, MDS. The results of this study are briefly summarized as follows: The most popular bathing type was shower (84.9%). Personal hygiene was one of the commonest purpose of bathing, and other purposes included health maintenance, stress alleviation, and beauty in order. Dimensions of consumer needs for washcloth were extracted from factor analysis as following properties: tactile, tough, aesthetic, constructive, and hygienic. The preference for washcloth type was related to skin type. "Non-skin damage property" was the most important parameter to choose washcloth and the other parameters included massage effect, tactile property, foaming property, and easy-to-use property.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.93-98
• /
• 2005

The purpose of this study was to analyze the compression strength research by aerated concrete as mixing ratio This Study used foaming-agent and produced aerated concrete by pre-foam way that is used in construction site. An experiment changes unit cement amount, w/c and the glass fiber mixing rate and 'measured capacity change, unit capacity weight and compressive strength. The results obtained from experimental study are as following; Research to reduce unit capacity weight in condition more than unit cement amount 500kgf is considered should be gone side by side. The highest compressive strength result appeared in aerated concrete that cement amount 600kgf and w/c ratio $45\%$, $50\%$. compressive strength was increased maximum $34%$ when glass fiber $0.7\%$ addition cause by coherence enlargement to enlargement of cement paste and glass fiber addition per unit volume

• 공업화학
• /
• 제17권1호
• /
• pp.62-66
• /
• 2006

본 연구에서는 폐 알루미늄을 이용하여 제조한 환경친화형인 발포 알루미늄 기능성 판넬의 특성을 조사하였고, 증점 공정, 교반 혼합 공정, 발포 공정, 냉각 공정을 거쳐 첨색 공정에 의한 제품 품질의 고급화를 추구하였다. 시험은 크게 세 가지로 구분하여 음향투과 손실 시험, 흡음율 측정 시험, 그리고 발포작업조건 및 스크랩 혼합시험을 시행하였다. 그 결과 폐 알루미늄을 이용해 만든 기능성 판넬은 초경량성이며 방음과 차음, 유해전자파 차폐에 탁월하고 약 $2.2kcal/mh^{\circ}C$ 정도로 낮은 열전도율 및 뛰어난 단열효과를 보이는 것으로 나타났다.

• 소성∙가공
• /
• 제12권6호
• /
• pp.588-596
• /
• 2003

The relationships between evolution of microstructure and mechanical properties of porous Al-3Si-2Mg-2Cu alloy after the foaming and various heat treating were investigated. The foamed alloy having various densities were manufactured by powder compact foaming and heat treated. Then compression test was performed with deformation rate of 0.5/s. The ultimate compression strength was not changed after solution heat treatment but the flow curve after ultimate strength showed very smooth and uniform plateau region. This change of flow curve means that the deformation mechanism is altered from brittle fracture to ductile deformation and the energy absorption property of Al foam is dramatically improved. The improvement of energy absorption without any detriment of mechanical properties is due to that the very brittle precipitation like Al-Cu and Al-Mg was uniformly dissolved in Al matrix after solution heat treatment. And various mechanical properties of Al alloy porous material were improved by 40% with aging of $200^{\circ}C$ and 50min. These improvements are ascribe to the various fine precipitates like $\Omega$ and $\theta$'.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.251-256
• /
• 2005

This study was performed the heat transportation ratio of three types of the following sandwich panel by KS F 2278(2003) ; Type ${\sharp}1$ : Carbon/epoxy Aluminum Honeycomb and Balsa Core Sandwich Panel(Thickness : 37mm), Type ${\sharp}2$ : Carbon/epoxy Aluminum Honeycomb Core Sandwich Panel(Thickness : 57mm), and Type ${\sharp}3$ : Carbon/epoxy Aluminum Honeycomb Core Sandwich Panel(Thickness : 37mm). Also was performed the heat transportation of next three types of the following sandwich panel by KS F2277(2002) ; Type ${\sharp}4$ and ${\sharp}5$ : 27mm, and 35mm thick-Aluminum Honeycomb Sandwich Panels, and Type ${\sharp}6$ : 27mm thick-Foaming Aluminum Sandwich Panel. It is the larger area between the skin and core, the heat transportation ratio is the higher, and when it is composed of the hybrid composite structure, good insulation property was shown.

• Elastomers and Composites
• /
• 제37권3호
• /
• pp.159-169
• /
• 2002

본 연구에서는 acrylonitrile-butadiene rubber(NBR)/타이어고무분말(Ground Tire Rubber, GTR) 블렌드계의 발포체를 제조하고, 이들의 난연성을 증진시키고자 하였다. 그 결과 난연제 중 유기인 화합물 및 무기금속 수산화물의 함량 증가에 따라 난연성이 증진됨을 확인할 수 있었다. 유기인 화합물의 경우 함량 증가에 따라 한계산소지수(LOI)가 증가하고, 열 방출 속도(HRR) 및 유효 연소열(EHC)이 감소하는 반면에 CO 방출률(량) 및 역기밀도가 증가함을 확인 할 수 있었다. 무기금속 수산화물은 함량 증가에 따라 난연효과 뿐만 아니라 열기발생 억제효과를 동시에 가짐으로써 LOI, HRR, EHC가 유기인 화합물 첨가에서와 같은 경향성을 보여주었지만 CO 방출률(량) 및 연기밀도에 있어서는 유기인 화합물 첨가에서와 상이하게 감소하였다. 그리고 난연성을 판단함에 있어 중요한 변수들인 열 방출속도, 유효 연소열, 무게감소, 한계산소지수간의 상관관계를 확인하였는데, A-HRR과 LOI가 증가함에 따라 질량손실이 각각 증가 혹은 감소하는 뚜렷한 경향성을 확인하였다. 이로써 NBR/GTR의 조성비기 $100{\sim}80/0{\sim}20 wt.%$이고 고무/난연제의 조성비가 $1/1.55{\sim}3.60 wt.%$일 때, 원활한 핵의 생성 및 cell의 성장으로 인해 균일한 closed cell 및 semi-closed cell을 보여주었다. 또한 $225{\sim}250 %$의 발포율을 보이며, 낯은 HRR과 높은 LOI($28.0{\sim}39.3$)를 갖는 난연성 및 발포성이 우수한 발포체를 얻을 수 있었다.

• Journal of Animal Science and Technology
• /
• 제53권3호
• /
• pp.253-259
• /
• 2011

The aim of this work was to determine the method and predict the optimum conditions for egg quality stored for 7 days when combination treatments of irradiation and chitosan coating were applied using response surface methodology (RSM). A central composite design was chosen for the RSM in this study and the factors were irradiation dose (0~2 kGy) and concentration of chitosan coating material (0~2%). Performance of the irradiation and chitosan coating were evaluated by analyzing the egg quality and functional property factors. The predicted maximum level of Haugh units and foaming ability calculated by a developed model were 74.19 at 0 kGy of irradiation with coating by 0.96% chitosan solution and 50.83 mm at 2.0 kGy with 1.01%, respectively. The predicted minimum value of foam stability and 2-thiobarbituric acid reactive substances (TBARS) value were 2.97 mm at 0.39 kGy with 0.21% and 0.54 mg malonaldehyde/kg egg yolk at 0 kGy with 0.90% of chitosan solution, respectively. Results clearly showed that gamma irradiation negatively affected the Haugh unit and TBARS but positively affected the foaming capacity. The estimated value from the developed model by RSM was verified by no statistical difference with observed value. Therefore, RSM can be a good tool for optimization and prediction of egg quality when 2 or more treatments are combined. However, one should decide the target quality first to achieve a successful implementation of this technology.

• Applied Biological Chemistry
• /
• 제36권3호
• /
• pp.172-177
• /
• 1993

참깨박에 함유되어 있는 불용성 형태의 단백질을 Bacillus sp. CW-1121이 생성하는 효소를 이용하여 가용성 형태의 단백질로 용출시키기 위하여 효소를 작용시켰다. 효소 처리 참깨박 단백질의 기포 형성력은 염용성 단백질이 수용성 단백질에 비해 현저히 낮았다. 기포 안정성은 염용성 단백질이 10분 이내 크게 감소된 반면 수용성 단백질의 기포 안정성은 30분 까지 완만하게 감소하였다. 유화력은 각 단백질의 등전점 부근에서 가장 낮았으며, 염용성 단백질이 수용성 단백질에 비해 낮았다 유화 안정성은 유화력과 비슷한 크기로 나타나 $80^{\circ}C$에서의 30분 가열에서도 이들 단백질이 열에 안정함을 보였다. 유지 및 수분 흡착력은 염용성 단백질이 수용성 단백질 보다 높은 값을 나타내었다.

• 한국응용과학기술학회지
• /
• 제15권2호
• /
• pp.11-24
• /
• 1998

All the surface activities including surface tension, foaming power, foam stability, emulsifying power, dispersion effect, and detergency were measured and critical micelle concentration(cmc) was evaluated in dilute aqueous solution. The cmc evaluated by the Ring method was $10^{-3}{\sim}10^{-4}mol/L$ in case of monoesters, and $10^{-3}{\sim}5.0{\times}10^{-5}mol/L$ in case of diesters, respectively. Surface tension of the aqueous solution was decreased to $45{\sim}50dyne/cm$, showing the tendency that the ability of lowering the surface tension was dependent on increasing of carbon atom number in alkyl chain. Foaming power of all the monoesters was better than that of diesters. while foam stability of diesters was to the contrary. Emulsifying power of soybean oil or benzene was specially expected to be good for emulsifiers in industrial application fields. HLB values of monoesters and diesters evaluated by Griffin's method were in the range of 8 to 12. Dispersion property of ferric oxide was stable in the range of $4.5{\times}10^{-5}{\sim}5.0{\times}^{-4}mol/L$ in case of monoesters, and $10^{-5}{\sim}10^{-4}mol/L$ in case of diesters.

• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.579-586
• /
• 2018

본 연구에서는 지방 알코올을 이용하여 탄소 길이에 따른 술폰산계 음이온 계면활성제를 합성하였으며, 합성한 계면활성제들의 구조를 FT-IR과 $^1H$ NMR 분석을 통하여 확인하였다. 음이온 계면활성제의 임계미셀농도(critical micelle concentration: cmc)는 $10^{-5}{\sim}10^{-3}mol/L$이며, 임계미셀농도에서의 표면장력 값은 26~32 mN/m이었다. 합성한 술폰산계 계면활성제의 분자당 최소 영역값은 $1.68{\sim}1.30nm^2$이다. 음이온 계면활성제의 분자당 최소 영역이 감소하였다. 합성한 계면활성제의 물성은 임계 미셀농도, 기포력, 유화력, 접촉각을 측정하였다.