• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.677-683
• /
• 2012

1-octanethiol and vinyl acetate telomers ($R_8S$-nVAc) were synthesized and hydrolyzed with sodium hydroxide subsequently, 1.2-epoxyhexane was then introduced to the telomers. In addition, we prepared cotelomers of multi-alkylated nonionic surfactants with a molecular structure of xRnMA-yVA (x; hydrophobic group, y; hydrophilic group, MA; methacrylic ester, VA; vinyl alcohol, R; and alkyl group) and cross-linked with sodium tetraborate decahydrate. Their active surface properties were investigated by several techniques such as surface tension, foaming property, and emulsification power measurements. The surface tension of $R_8S$-8.8VA decreased without the introduction of 1.2-Epoxy hexane, and the degree of emulsification and foaming abilities of $R_8S$-8.8VA increased without the introduction of 1.2-Epoxy hexane. However, the differences were insignificant. The epoxy groups were attached to a $R_8S$-8.8VA cotelomer with a limited variation of the active surface properties. The surface tension of $1.1R_6MA$-8.8VA decreased after cross-linking subsequently, the degree of emulsification and foaming abilities of $1.1R_6MA$-8.8VA increased after cross-linking. However, there was no clear difference between them. The B-O bonds were attached to a $1.1R_6MA$-8.8VA cotelomer with a limited variation of the active surface properties.

• 한국식품영양과학회지
• /
• 제22권6호
• /
• pp.743-752
• /
• 1993

To elucidate the effects of natural gums, i.e. carrageenan, locust bean gum and xanthan gum and synthetic gums, i.e. carboxymethyl cellulose(CMC) and methyl cellulose(MC) on the foaming properties of sodium caseinate, surface tension, absolute viscosity, turbidity, foaming ability, foam stability, and heat stability of the foams of the caseinate solutions with added gums were examined. The surface tension of sodium caseinate solution(5%) adding to gums at pH 4.0 and 5.0 were higher than those at pH 7.0 and 8.0. The viscosities of the solutions adding to gums(0.1, 0.2, 0.3 and 0.5%) ap pH 4.0, 5.0, 7.0 and 8.0 were 2.4~170.0, 2.5~190.0, 5.3~180.0 and 6.3~99.0 cps, respectively. Especially xanthan gums predominantly increased the viscosity. Turbidities were 97.3~98.2 at pH 4.0 and 5.0 and 93.0~95.8 at pH 7.0 and 8.0. Foaming abilities of the solution adding to xanthan gum, carrageenan and locust bean gum were increased, while those of CMC and MC were decreased. Additions of xantham gum, CMC and MC increased the foam stability, especially xanthan gum did predominantly. Xanthan gum, MC and locust bean gum were more effective than CMC and carrageenan for heat stability. For improving the foaming properties of sodium caseinate xanthan gum were best of five kinds of gums. Surface tensions and turbidities of the solution were related to foaming ability, and the viscosities were related to foam stability and heat stability.

• 한국응용과학기술학회지
• /
• 제32권1호
• /
• pp.72-77
• /
• 2015

고급지방산 메틸 에스테르류의 소포제를 합성하고 FT-IR과 $^1H-NMR$ 분석을 통해 확인하였다. FT-IR을 이용하여 합성된 물질의 특징인 -C=O기는 $1740cm^{-1}$ 부근에서, 그리고 C-O기는 $1175cm^{-1}$ 피크 값을 가지는 것을 확인하였다. 또한 $^1H-NMR$ 분석을 통해 에스테르의 -C=O의 Chemical shift가 2.29 ppm에서 나타나는 것을 확인하였다. 표면장력은 Surface Tensiometer CBVP-43을 이용하여 측정하였다. 표면장력은 17.7에서 21 dyne/cm 값을 가진다. SLS 수용액에서의 소포능은 Ross-Miles법을 통해 측정되었다. 4종류의 소포제 중 소포능은 스테아르산메틸을 이용하여 제조한 소포제가 가장 뛰어난 것으로 측정됐다.

• Applied Biological Chemistry
• /
• 제37권4호
• /
• pp.259-265
• /
• 1994

Sodium caseinate의 농도, 가열온도 및 pH가 거품성에 미치는 영향을 조사하기 위하여 농도를 1.0, 3.0, 5.0, 7.0, 및 10.0%로, 열처리온도를 $55^{\circ}C$ 및 $65^{\circ}C$로, 그리고 pH를 6.0, 7.0 및 8.0으로 각각 조절하여 표면장력, 겉보기점도, 혼탁도, 거품형성능 및 거품안정성을 측정하였다. 표면장력은 농도, 열처리온도 및 pH에 따라 전체적으로 $0.0455{\sim}0.0496\;Nm^{-1}$로써 큰 변화가 없었고 겉보기점도는 농도 및 가열온도에 따라 pH 6.0, 7.0 및 8.0에서 각각 $0.0019{\sim}0.1050$, $0.0021{\sim}0.0440$ 및 $0.0022{\sim}0.0490Pa{\cdot}s$이었으며 혼탁도는 pH 6.0, 7.0 및 8.0에서 각각 $70.3{\sim}97.4$, $44.4{\sim}94.8$ 및 $36.6{\sim}93.9$이었다. 전 pH 영역을 통하여 가열온도에 따른 거품형성능의 증감은 있었으나 어떤 규칙적인 변화는 없었고 pH 6.0에서가 7.0 및 8.0 영역에서보다 거품형성능이 양호한 경향이었으며 거품형성능을 위한 적당한 단백질 농도는 $3.0{\sim}7.0%$이었다. 거품안정성은 전체적으로 10.0% 농도구에서, pH는 6.0 영역에서 가장 양호하였다. pH 6.0 및 7.0에서는 가열처리구가 대조구보다 거품안정성이 떨어지는 경향이었으나 pH 8.0의 10.0% 농도구의 경우는 모두 가열처리구가 대조구보다 안정성이 증가하였다(p<0.05). 표면장력, 겉보기점도 및 혼탁도의 증감에 따른 거품성의 규칙적인 변화는 나타나지 않았다.

• Advances in materials Research
• /
• 제3권4호
• /
• pp.183-197
• /
• 2014

Copolymers of gelatin and poly (vinyl alcohol), (PVA) grafted by acrylic acid (AAc) with excellent water absorption and retention abilities under neutral conditions were successfully synthesized using $^{60}Co$ gamma radiations in presence of ammonium persulphate (APS), as water soluble initiator and sodium bicarbonate ($NaHCO_3$) as foaming agent. The optimum synthesis conditions pertaining to maximum swelling percentage were evaluated as a function of gelatin/PVA ratio, amount of water, concentration of APS, $NaHCO_3$, monomer concentration and total irradiation dose. Maximum percent swelling (1694.59%) of the copolymer, gelatin-co-PVA, was obtained at optimum $[APS]=2.92{\times}10^{-1}mol/L$, $[NaHCO_3]=7.94{\times}10^{-2}mol/L$ and 1.5 mL of water at total dose of 31.104 kGy while in case of grafted copolymer, (gelatin-co-PVA)-g-poly(AAc), maximum percent swelling (560.86%) was obtained using $8.014{\times}10^{-1}mol/L$ of AAc in 9 mL water with 31.104 kGy preirradiation dose. The pristine and grafted copolymers were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning electron Microscopy (SEM), Thermal gravimetric analysis (TGA) and X-Ray Diffraction (XRD) methods. The copolymers loaded with an antiseptic, Povidone, were used as wound dressing materials for wounded gastrocnemius muscle of mice and the results exhibit that (gelatin-co-PVA)-g-poly (AAc) copolymer is a potent wound dressing material as compared to the copolymer.