• Journal of computational fluids engineering
• /
• v.21 no.2
• /
• pp.32-39
• /
• 2016

The Gradient Biome is a unique and large greenhouse(length 200 m, width 50 m, height:40 m) in which the elements of the weather, such as temperature and humidity, are controlled and reproduced in such a way as to create a continuous gradient from the tropical to frigid zones along specified longitudinal or transvers lines on the earth. One of the main purposes of the Gradient Biome is to observe the possible responses of the ecosystems (mainly plants), which are to be corresponding to each test climate and be introduced in the Biome, to the expected global warming. As one of the expected responses is the shift of the ecosystem(s) toward the region of suitable environment, there should be no artificial obstacles, which can prevent the shift, inside the facility. However, it is important but not so easy to find the ways of how the temperature and humidity in the Biome could be reproduced since the environmental variables tends to be homogeneous. In this paper, numerical simulations were carried out to find the effective control methods for air temperature and humidity inside the real scale Biome. One of the contributed solvers of OpenFOAM, which is an open source physics simulation code, was modified and used for the simulations.

• Journal of computational fluids engineering
• /
• v.18 no.1
• /
• pp.43-48
• /
• 2013

The feasibility of a unique greenhouse, named as Gradient Biome, is now being examined extensively in the University of Tokyo. It is a large chamber (length:200m, width:50m, height:40m) in which the weather, such as temperature and humidity, of the tropical zone through to that of the frigid zone on the earth is reproduced with continuous gradient. In the Gradient Biome, ecosystems (mainly plants) corresponding to each weather are introduced and the possible responses of this ecosystems to the expected global warming are to be observed. Since one of the expected responses is the shift of the ecosystem(s) toward the region of suitable environment, there should be no artificial obstacles, which can prevent the shift, inside the Biome. This requirement is not so easy to be satisfied since the environment tends to be homogeneous. This paper presents the results of the numerical studies conducted to find the ways of how the temperature and humidity in the Gradient Biome could be reproduced. One of the contributed solvers of OpenFOAM, which is an open source physics simulation code, was modified and used for the numerical simulations.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.528-535
• /
• 2001

Polyurethane specimens were mainly composed of polyol, MDI, silicone surfactant, and water. The effects of ethylene glycol on the cell size, forming magnification, cream time, gel time, take free time, final free rising height, and reactive temperature were investigated. The cyclopentane was used for PU foam as a physical blowing agent. The components were hand-mixed at about 5000 rpm within 4 seconds at room temperature. The mixtures with various ethylene glycol contents were foamed in the wood mold. When the index of isocyanate was fixed, as the amount of ethylene glycol increased, cell size and thermal conductivity were decreased by about 5.1% and 14%, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.81-86
• /
• 2003

To prepare alkaline degreasing agents(SADAs), tetrasodium pyrophosphate(TSPP), $Na_2CO_3$, Tetronix T-701 (T-701), Na-dioctyl sulfosuccinate(303C), Demol C, and MJU-100A were blended. The prepared degreasing agents were tested with steel specimens and the results were as follows. The degreasing powers of SADA-6($Na_2CO_3$ 50g/TSPP 25g/T-701 10g/303C 15g/Demol C 12g/MJU-100A 8g/water 130g mixture) for press-rust preventing oil were 98% and 99% degreasing at 4wt%, 70 $^{\circ}C$ and 90 $^{\circ}C$, respectively; for quenching oil, the degreasing power of SADA-6 was 92% degreasing at 4wt% and 70 $^{\circ}C$. From these results, it was proved that the SADA-6 exhibits a good degreasing power. Foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 6wt% and 60 $^{\circ}C$ were 16mm and 40mm, respectively. SADA-6 was proved a good low foaming degreasing agent.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.4
• /
• pp.281-287
• /
• 2017

In the case of fixed offshore wind turbines, scouring phenomena have been reported around sub-structures as a result of currents, which seriously damage the structural stability. A parametric study of the various sub-structures of a fixed offshore wind turbine was performed to investigate their effects on the scouring phenomena. For a suction bucket foundation and monopile, the effects of the stick-up heights and water depth were studied, respectively. The open source libraries, called OpenFOAM, were used to simulate a violent flow around a foundation. The numerical methods were selected based on a two-dimensional analysis of a suction bucket. Based on the results for various stick-up heights, a larger scouring region was observed with an increase in the stick-up height because of the down-wash flow around a foundation. Based on the results for various monopile water depths, the water depth had an insignificant effect on the scouring.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1620-1627
• /
• 2001

In this paper, a broadband microstrip antenna for PCS and IMT-2000 service is designed. To obtain the broadband characteristics of an antenna, we utilized the multi-layered structure composed of two foam material layers, parasitic element and aperture coupled feeding network. The broadband characteristic is obtained by changing the size of parasitic element and the height of foam materials. In addition to that, the usage of metal layer at the distance of λ/4 from feed-line, back radiation is reduced. The bandwidth of a single element for VSWR less than 1.3 is about 550MHz. The bandwidth of a designed 1$\times$4 array antenna for VSWR less than 1.3 is about 460MHz. The gain of a designed array antenna is about 11.15∼12.15dBi and the front-to-back ratio is about 30dB.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.569-572
• /
• 2003

In VLM-ST process, the fine detailed shape processing process is needed due to the use of thick sheets for layers. The developed process perform the fine detailed shape processing in VLM-ST parts using non-contact hot tool. To predict the heat-affected zone and temperature distribution of VLM-ST parts in detailed shaping, the heat flux from the tool to the surface was calculated for the finite element analysis by modeling the tool as a heat source of radiation. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the analysis. The results showed a good agreement with the experiments.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.48-56
• /
• 2000

The objective of this study was to investigate the enzymatic deinking technology. Office recycled papers such as computer printed out(CPO) and white ledger(WL) were used in the evaluation of four different deinking conditions ; alkaline deinking , neutral deinking and enzymatic deinking at alkaline and neutral pH. Filltering pads were prepared after flotation deinking to measure brighteness gain and ink removal efficiency. Three different surfactants were also used in the evaluation of deinking efficiency including surface chemical properties by measuring foam height and stability, surface tension and cloud point of views. The results indicated that the neutral deinking method with enzyme and surfactant addition showed highest deinking efficiency of office recycled papers.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.2
• /
• pp.91-98
• /
• 2003

Experimental study for a porous aluminum heat dissipator/or heat sink made by casting method is conducted to evaluate the performance of the porous aluminum heat sinks. The parameters applied for the present study are the manufacturing method. various bonding materials for the bottom plate of heat sink, and their different material, pore size, etc.. The casting method for porous aluminum heat sink is suggested for the best performance of heat dissipation in this experiment. The bottom plate applied by melting aluminum is introduced and proved their excellent characteristics compared with brazing, soldering, and bonding methods. In the present experiment, aluminum with different conductivities, such as AC8A and pure aluminum, are tested and the pure aluminums with the higher conductivity than AC8A shows their improvement of the performance. And the proper dimensions related to the pore size and the height of porous aluminum heat sinks are proposed in the present study.

• Journal of Advanced Research in Ocean Engineering
• /
• v.4 no.4
• /
• pp.174-184
• /
• 2018

We herein propose a new design procedure of a flexible container ship model where the vertical bending and torsional vibration modes are similar to its prototype. To achieve similarity in torsional vibration mode shapes, the height of the shear center of the model must be located below the bottom hull, similar to an actual container ship with large opening decks. Therefore, we designed a ship model by imparting appropriate stiffness to the hull, using urethane foam without a backbone. We built a container ship model according to this design strategy and validated its dynamic elastic properties using a decay test. We measured wave-induced structural vibrations and present the results of tank experiments in regular and freak waves.