• 환경사랑
• /
• 통권50호
• /
• pp.7-7
• /
• 2007

• 환경사랑
• /
• 통권50호
• /
• pp.10-11
• /
• 2007

• 환경사랑
• /
• 통권50호
• /
• pp.12-13
• /
• 2007

• 환경사랑
• /
• 통권50호
• /
• pp.14-15
• /
• 2007

• 환경사랑
• /
• 통권50호
• /
• pp.4-5
• /
• 2007

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1145-1156
• /
• 2016

To study the effects of foam core density and face-sheet thickness on the mechanical properties and failure modes of aluminum foam sandwich (AFS) beam, especially when the aluminum foam core is made in aluminum alloy and the face sheet thickness is less than 1.5 mm, three-point bending tests were investigated experimentally by using WDW-50E electronic universal tensile testing machine. Load-displacement curves were recorded to understand the mechanical response and photographs were taken to capture the deformation process of the composite structures. Results demonstrated that when foam core was combined with face-sheet thickness of 0.8 mm, its carrying capacity improved with the increase of core density. But when the thickness of face-sheet increased from 0.8 mm to 1.2 mm, result was opposite. For AFS with the same core density, their carrying capacity increased with the face-sheet thickness, but failure modes of thin face-sheet AFS were completely different from the thick face-sheet AFS. There were three failure modes in the present research: yield damage of both core and bottom face-sheet (Failure mode I), yield damage of foam core (Failure mode II), debonding between the adhesive interface (Failure mode III).

• 한국가스학회지
• /
• 제17권1호
• /
• pp.35-41
• /
• 2013

본 연구에서는 페놀 폼의 난연성을 증가시키기 위하여 널리 사용되고 있는 인계 난연제의 첨가에 따른 페놀 폼과 폴리우레탄 폼의 난연 성능을 비교 평가하였다. 난연제가 첨가된 페놀 폼과 폴리우레탄 폼을 각각 열분석(TGA)을 통하여 열분해 거동을 알아보았고 Cone calorimeter를 이용하여 열방출량(HRR), 연기발생량(TSR) 및 CO 및 $CO_2$ 발생량과 산소한계지수(Limited oxygen index, LOI)를 통하여 난연성능을 평가하였다. 실험 결과 페놀폼이 폴리우레탄 폼에 비해 초기 분해는 빠르지만 $800^{\circ}C$에서 잔존량이 월등히 많았으며 낮은 열방출속도 값을 나타내었다. 또한 질량 감소율, 연기발생량도 폴리우레탄 폼보다 낮아 우수한 난연성능을 가지는 것을 알 수 있다.

• 한국대기환경학회지
• /
• 제16권4호
• /
• pp.381-388
• /
• 2000

Ceramic foam prepared with cordierite as a starting material by foam method was tested to evaluate the feasibility as a filter for the dust collection in hot gas. Two different types of agents Benzethonium chloride (BZTC, C27H42NO2Cl) and Sodium Lauryl Sulfate(SLS, CH3(CH2)11OSO3Na) were used as foaming agents in foaming process. Porosityof ceramic foam was about 80% and mean pore size were 100${\mu}{\textrm}{m}$ for SLS agent and 200 ${\mu}{\textrm}{m}$ for BZTC. It was observed that ceramic foam was composed of continuous macro-pore structure with opening windows interconnecting macro-pores. The surface of ceramic foam support of was coated with cordierite particles ranged from 20${\mu}{\textrm}{m}$ to 50${\mu}{\textrm}{m}$ Meso-pore size in the coating layer on ceramic foam was below 10${\mu}{\textrm}{m}$. While air permeability of the support increased with increasing macro-pore size coated ceramic filters showed a constant permeability without regard to the macro-pore size of the support. The permeabuilities of support varied in the range of 600$\times$10-13m2 to 1000$\times$10-13m2. For the case of coated ceramic filter it was about 200$\times$10-13m2. As a result of particle trapping test by using fly ash the particle removal efficiency was over the 99.9%.

• 한국물환경학회지
• /
• 제21권5호
• /
• pp.496-499
• /
• 2005

Power Plant is requested, by environmental bodies and fisherman, to correct the pollution of coastal area due to the outflow of foam from the outlet of the power plants. Foam wastewater cause a lot of environmental problems, expecially in aesthetic points of view. Therefore, It is needed to be collect from the stream into nearby ocean, and the collected foams should be treated before being discharged into nearby ocean. The most effective and feasible treatment method researched for the effective treatment of foam wastewater generated at the power plants. The result of the test is confirmed with collecting Foam wastewater by inhalation force. The treatment pilot ($3m^3/hr$) collected wastewater was operated by Biological degradation method(Aerobic/anaerobic Processes) for approximately two months. It was removed SS, COD, nutrient(T-P, T-N), etc. The System is expected successfully by Minimizing the operating costs such as electricity, repair expenses, chemicals and supplies expenses.

• 한국가스학회지
• /
• 제20권2호
• /
• pp.30-34
• /
• 2016

본 연구에서는 LNG나 LPG등과 같은 초저온용 단열재로 사용되는 폴리우레탄 폼을 대체하기 위한 연구의 일환으로 레졸형 페놀수지를 사용하여 페놀 폼을 합성하였다. 페놀 수지 발포 폼을 합성하기 위해 HCFC-141b, HFC-365mfc와 HFC-227fa의 혼합물, n-pentane, cyclopentane, n-hexane 및 cyclohexane을 발포제로 사용하여 발포제에 따른 페놀수지 폼의 물성변화를 고찰하였다. 발포제로 cyclohexane을 사용하였을때 가장 우수한 단열성능과 압축강도를 나타내었으며 동일한 발포제를 사용하여 합성한 폴리우레탄 폼과의 내열성을 비교한 결과 폴리우레탄 폼에 비해 매우 우수한 내열성을 나타내었다.