• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.58-68
• /
• 2009

In this study, rheological properties of ternary system cement containing ground fly ash(F3, Blaine specific surface area $8,100\;cm^2/g$) were investigated using mini slump, coaxial cylinder viscometer and conduction calorimeter. In the results, the segregation resistance was observed at high W/B and PC area while the replacement ratio of F3 was increasing. The 2:5:3 system was shown in higher fluidity and lower hydration heat than 3:4:3 system. The segregation range of cement pastes occurred over 175 mm in average diameter by mini slump and below $10\;dynesec/cm^2$ of the plastic viscosity or below 50 cP of the yield stress by coaxial cylinder viscometer. It was observed that even if BFS and FA blended together admixture properties would remaine as they were separately. The properties of admixture would not be changed. On the above results, the decreased replacement ratio of OPC and increased replacement ratio of admixtures would be possible.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.687-690
• /
• 2005

Recently, to consider financial and constructive aspect, usage of Admixture, like Blast- Furnace Slag and Fly-Ash, are increased. These mineral admixtures, a by-product of steel industry, have many advantage, to reduce the heat of hydration, increase in ultimate strength, improve workability and etc. But it also reduces early-age strength, so it is prevented from using of Blast-Furnace Slag at cold-weather-concrete. In this study, for the purpose of increasing usage of mineral admixtures, like Blast-Furnace Slag and Fly ash, it is investigated the strength properties of concrete subjected to under low temperature According to this study, if early curing is carried out before having frost damage, the strength of concrete, subjected to frost damage, is recovered. And to consider increasing effect of strength, it is more effective to use of mineral admixtures, especially to use blast furance slag.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.135-136
• /
• 2019

Recently, as the interest in environmental issues increases, the construction industry needs to recycle blast furnace slag, circulating fluidized bed Combustion fly ash, etc. to solve industrial by-products, and to develop artificial stone. In this study, the strength characteristics based on blast furnace slag according to the addition rate of alkali stimulant NaOH are investigated. The experimental results showed that the flexural and compressive strengths increased with the addition of alkali stimulants. Based on these results, it will be presented as a basic research data for the manufacture of artificial stone and will be tested later.

• 콘크리트학회논문집
• /
• 제18권6호
• /
• pp.769-776
• /
• 2006

최근 급속한 산업의 발달과 더불어 토목 건축기술의 발달로 콘크리트 구조물의 초고층화 대형화가 이루어 지고 있으며, 이러한 대형 구조물의 시공에 있어서 콘크리트의 온도상승은 부재의 내 외부 온도차이로 인한 온도응력에 의하여 균열을 발생시켜 구조물의 내하력 및 내구성에 심각한 손상을 가져올 수 있다. 연구에서는 시멘트 및 혼화재의 종류 및 배합설계 조건에 따라 콘크리트의 수화발열 특성 및 콘크리트의 공학적 특성에 대해 실험을 진행하였다. 시멘트 종류는 1종 보통포틀랜드시멘트, 혼합시멘트인 고로슬래그시멘트 및 4종 포틀랜드시멘트(벨라이트시멘트)를 사용하였으며, 혼화재 종류로는 플라이애쉬와 고로슬래그미분말을 사용하였다. 혼화재의 사용방법은 일반적으로 사용되는 플라이애쉬 25% 대체한 경우와 비교용으로 고로슬래그미분말을 50% 대체한 경우(2성분계 배합)와 또는 플라이애쉬와 혼합 사용(3성분계 배합) 방법을 적용하였다. 본 연구 결과, 결합재 종류 및 설계 조건에 따른 수화발열특성에 있어서는 벨라이트시멘트를 사용하는 것이 가장 효과적이며, 플라이애쉬를 사용한 경우도 수화열 저감 효과는 우수한 것으로 나타났으며, 수화발열특성을 비롯한, 콘크리트의 품질 특성을 종합적으로 고려할 경우, 고로슬래그미분말의 사용이 효과적이며, 특히 고로슬래그미분말과 플라이애쉬를 혼합사용한 3성분계의 배합설계가 가장 효과적인 것으로 판단된다.

• 대한환경공학회지
• /
• 제31권2호
• /
• pp.114-118
• /
• 2009

본 연구에서는 소각재와 하수슬러지, 용융슬래그 등을 이용하여 기존의 벽돌을 대신 할 수 있는 건축외장재를 제조하고,사용 재료의 혼합비와 소성온도 등 적정 제작 조건을 도출하고자 한다. 외장재 제조는 재료를 각 비율별로 성형하여 상온과 $160^{\circ}C$에서 각각 24시간 동안 건조 후 1,080~$1,130^{\circ}C$에서 2시간 동안 소성하였다. 소성한 다음 제조한 외장재 시편의 압축강도를 측정해 본 결과 소성온도가 증가할수록 압축강도는 증가하였으며, 소각재의 함유량이 적을수록, 용융슬래그의 함량이 증가할수록 압축강도가 증가하였다. 본 연구에서 도출된 외장재 제조 적정조건은 소각재 : 용융슬래그 : 하수슬러지 : 점토의 비율이 10 : 20 : 5 : 65로 제조된 시편을 $1,115^{\circ}C$에서 소성한 시편의 압축강도가 41 MPa 이상으로 나타나 외장재로서의 사용이 가능한 것으로 나타났다. 또한 제조한 외장재의 중금속 용출실험결과 환경적으로 안전한 것으로 나타났다.

• International Journal of Concrete Structures and Materials
• /
• 제18권1E호
• /
• pp.63-70
• /
• 2006

This study tested the alkali-silica reactivity of various types of crushed stones, following the specifications of ASTM C 227 and C 1260, and the results obtained from the tests were compared. This study also analyzed the effects of particle size and grading of reactive aggregate based on the expansion of mortar-bar due to an alkali-silica. The effect of mineral admixtures to reduce the detrimental expansion caused by the alkali-silica reaction was investigated based on the method specified by ASTM C 1260. The mineral admixtures used in this study were fly ash, silica fume, metakaolin and ground granulated blast furnace slag. The replacement ratios of 0, 5, 10, 15, 25 and 35% were uniformly applied to all the mineral admixtures, and the replacement ratios of 45 and 55% were additionally applied for the admixtures that could sustain the workability at these ratios. The results indicate that replacement ratios of 25% for fly ash, 10% for silica fume, 25% for metakaolin and 35% for ground granulated blast furnace slag were the most effective in reducing the expansion due to the alkali-silica reaction under the experimental conditions of this study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.781-786
• /
• 2001

The Salt attack is one of the primary factors that cause the deterioration of durability in steel reinforced concrete structure. And to depreciate the deterioration from the Salt attack in concrete structure, pozzolanic materials are used widely in recent years. In this study, experiments about the resistance of chloride infiltration of concrete according to the replacement rations of Activated Hwangtoh and various pozzolanic materials(silica fume, fly ash, blast furnace slag and non Activated/Activated Hwangtoh) are performed and the results of this study were shown as follows; 1) As the replacement ratios of Activated Hwangtoh were getting higher, the strength of concrete was increased and in case of various pozzolanic materials, strength of Activated Hwangtoh in specimen was better than that of fly ash, blast furnace slag and non Activated Hwangtoh. 2) As the replacement ratios of Activated Hwangtoh were getting higher, the resistance of chloride infiltration of concrete was increased and in case of various pozzolanic materials, silica fume is better than any other pozzolanic materials and Activated Hwangtoh was better than that of fly ash, blast furnace slag and non Activated Hwangtoh.

• Structural Engineering and Mechanics
• /
• 제51권1호
• /
• pp.1-13
• /
• 2014

This paper reports an experimental study into the rheological behaviour of self consolidating concrete (SCC). The investigation aimed at quantifying the impact of the varying amounts of mineral admixtures on the rheology of SCC containing natural sand. Apart from the ordinary Portland cement (OPC), the cementitious materials such as fly ash (FA), ground granulated blast furnace slag (GGBS) and micro-silica (MS) in conjunction with the mineral admixtures were used in different percentages keeping the mix paste volume and flow of concrete constant at higher atmospheric tempterature ($30^{\circ}$ to $40^{\circ}C$). The rheological properties of SCC were investigated using an ICAR rheometer with a four-blade vane. The rheological properties of self-consolidating concrete (SCC) containing different mineral admixtures (MA) were investigated using an ICAR rheometer. The mineral admixtures were fly ash (FA), ground granulated blast furnace slag (GGBS), and micro silica (MS). The results obtained using traditional workability results are compared with those obtained using ICAR rheometer. The instrument ICAR (International Center for Aggregate Research) rheometer employed in the present study for evaluating the rhelogical behaviour of the SCC is found to detect systematic changes in workability, cementitious materials, successfully. It can be concluded that the rheology and the slump flow tests can be concurrently used for predicting the flow behaviours of SCC made with different cementitious materials.

• International Journal of Concrete Structures and Materials
• /
• 제7권2호
• /
• pp.155-163
• /
• 2013

The use of sustainable technologies such as supplementary cementitious materials (SCMs), and/or recycled materials is expected to positively affect the performance of concrete mixtures. However, it is imperative to qualify and implement such mixtures in practice, if the required specifications of their intended application are met. This paper presents the results of a laboratory investigation of self-consolidating concrete (SCC) containing sustainable technologies. Twelve mixes were prepared with different combinations of fly ash, slag, and recycled asphalt pavement (RAP). Fresh and hardened concrete properties were measured, as expected the inclusion of the sustainable technologies affected both fresh and hardened concrete properties. Analysis of the experimental data indicated that inclusion of RAP not only reduces the ultimate strength, but it also affected the compressive strength development rate. The addition of RAP to mixes showed a consistent effect, with a drop in strength after 3, 14, and 28 days as the RAP content increased from 0 to 50 %. However, most of the mixes satisfied SCC fresh properties requirements, including mixes with up to 50 % RAP. Moreover, several mixes satisfied compressive strength requirement for pavements and bridges, those mixes included relatively high percentages of SCMs and RAP.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.93-97
• /
• 2008

The study analyzed on each kind of basic characteristics in mortar to prove an effect of pre-mix cement, ultra high strength binder. The results were as follows. in characteristics of not set mortar, fluidity time was the quickest at the time of using POBSA and was more delayed at the time of using Fly Ash than at the time of using Blast Furnace Slag as a binder. Mortar ring flow and flow con flow got smaller as fluidity time got longer, on the contrary to fluidity time. Unit capacity mass was smaller at the time of using Fly Ash than at the time of using Blast Furnace Slag. According to pre-mix, it was difficult to discover a regular tendency. In characteristics of hardening mortar, the 28th day compressive strength was better than thing mixed after measuring separately in pre-mix. According to a binder's kind, Silica Fume B, C was better than Silica Fume A.