• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1355-1360
• /
• 2006

This paper presents the dynamic stability of a cantilevered Timoshenko beam with a concentrated mass, partially attached to elastic foundations, and subjected to a follower force. Governing equations are derived from the extended Hamilton's principle, and FEM is applied to solve the discretized equation. The influence of some parameters such as the elastic foundation parameter, the positions of partial elastic foundations, shear deformations, the rotary inertia of the beam, and the mass and the rotary inertia of the concentrated mass on the critical flutter load is investigated. Finally, the optimal attachment ratio of partial elastic foundation that maximizes the critical flutter load is presented.

• Wind and Structures
• /
• 제4권5호
• /
• pp.367-382
• /
• 2001

Wind tunnel tests were conducted on a model of deck section from the Ting Kau cable stayed bridge. The purpose of the tests was to determine the set of aerodynamic derivatives conventionally used to describe the motion-induced forces arising from the wind flow, and to investigate the stability of the deck under different conditions of turbulence and angle of attack. The study shows that except for large negative angles of attack the deck section itself is stable up to a high wind speed, and that when instability does occur it is essentially a single degree of freedom (torsional) flutter.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.185-190
• /
• 2001

Rotating disks are used in various machines such as floppy disks, hard disk, turbines and circular sawblades. The problems of vibrations of rotating disks are important in improving these machines. Many investigators have dealt with these problem. Specially, vibrations of a rotating flexible disk taking into account the effect of air is difficult problem in simulation. The governing equation of a rotating flexible disk coupled to the surrounding fluid is investigated by a simple mathematical model. And several important parameters concerned with the stability of a rotating flexible disk are defined. Coupling strength between air and rotating flexible disk is proportional to square of disk radius directly and square root of the all of bending rigidity, disk density and thickness inversely. Lift-to-damping coefficient has relation to the onset of disk flutter.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.99-104
• /
• 2001

Thermally induced vibration response of solar array is investigated. The solar array model consists of composite thin walled beam and solar blanket, spreader bar. The composite thin walled beam incorporates a number of nonclassical effects of transverse shear, primary and secondary warping, rotary inertia and anisotropy of constituent materials. The solar blanket is a membrane subjected to uniform tension in the z direction. The spreader bar is a rigid member. A coupled thermal structure analysis that includes the effects of structural deformations on heating and temperature gradient is investigated. A stability criterion given in parameters for establishes the conditions for thermal flutter.

• 한국항공우주학회지
• /
• 제30권3호
• /
• pp.115-122
• /
• 2002

구조감쇠가 복합적층판의 초음속 패널 플러터에 미치는 영향을 연구하기 위해 에너지법을 활용하여 지배방정식을 유도하였다. 구조 모델링은 일반적인 고전 적층판 이론을 적용하고 이의 해석은 진동 모우드를 가정하는 Rayleigh-Ritz법을 이용하였다. 비정상 공기력은 피스톤 이론(piston theory)을 적용하였다. 구조감쇠가 패널의 플러터에 미치는 일반적인 영향을 고찰하기 위해 등방성 평판의 구조감쇠의 크기에 따른 임계동압을 계산하였으며 이로부터 구조감쇠가 플러터 안정성을 감소시킬 수 있음을 확인하였다. 또한 복합적층판의 적층각에 따른 임계동압을 계산하여 패널 플러터와 구조감쇠와의 관계를 파악하였다. 구조감쇠는 낮은 공력감쇠에서는 플러터 안정성에 중요한 역할을 하지만 높은 공력감쇠에서는 거의 영향을 미치지 않았다.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권1호
• /
• pp.14-19
• /
• 2009

The typical aeroelastic analysis for a complex configuration such as a complete aircraft was done using the aerodynamic results of the wing and the structural modes of a complete aircraft; that is, the aerodynamics of a wing of a complete aircraft is assumed to be not much influenced by the body shape. Nevertheless, the body shape can cause a distortion of aerodynamic pressure on the wing surface and it is necessary to investigate the body effect in flutter analysis. In this reseasrch, MGM inverse design method is applied to include the body effect of a wing-body model which disturbs the pressure distribution on the wing surface.

• 대한후두음성언어의학회지
• /
• 제12권2호
• /
• pp.115-120
• /
• 2001

In this paper, we synthesized vowel /ae/ with voice synthesis program of Dr. Speech Science, and we also synthesized pathologic vowel /ae/ by some parameters such as high frequency gain (HFG), low frequency gain(LFG), pitch flutter(PF) which represents jitter value and flutter of amplitude(FA) which represents shimmer value, and grade ranked as mild, moderate and severe respectively. And then we analysed all pathologic voice by analysis program of Dr. Speech Science. We expect that this synthesized pathologic voices are useful for understanding the parameter such as noise, jitter and shimmer and feedback effect to patient with voice disorder.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.356-359
• /
• 2007

In this paper, the stability of a rotating cantilever pipe conveying fluid with a crack is investigated by the numerical method. That is, the influences of the rotating angular velocity, mass ratio and crack severity on the critical flow velocity for flutter instability of system are studied. The equations of motion of rotating pipe are derived using the Euler beam theory and the Lagrange's equation. The crack section of pipe is represented by a local flexibility matrix connecting two undamaged pipe segments. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations. Generally, the critical flow velocity for flutter is proportional to the angular velocity and the depth of crack. Also, the critical flow velocity and stability maps of the rotating pipe system as a function of mass ratio for the changing each parameter are obtained.

• 한국소음진동공학회논문집
• /
• 제22권1호
• /
• pp.38-45
• /
• 2012

In this paper, flow-induced flutter instability of a cantilever carbon nanotube conveying fluid and modelled as a thin-walled beam is investigated. Analytically nonlocal effect, transverse shear and rotary inertia are incorporated in this study. The governing equations and the boundary conditions are derived through Hamilton's principle. Numerical analysis is performed by using extended Galerkin method which enables us to obtain more exact solutions compared with conventional Galerkin method. Variation of critical flow velocity of carbon nanopipes based on three different models such as analytically nonlocal model, partially nonlocal model, and local model are investigated and pertinent conclusion is outlined.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.129-135
• /
• 2004

This paper discussed on the effect of an intermediate support on the stability of elastic material subjected to dry friction force. It is assumed in this paper that the dry frictional force between a tool stand and an elastic material can be modeled as a distributed follower force. The elastic material on the friction material is modeled for simplicity into an elastic beam on Winkler-type elastic foundation. The stability of beams on the elastic foundation subjected to distributed follower force is formulated by using finite element method to have a standard eigenvalue problem. The first two eigen-frequencies are obtained to investigate the dynamics of the beam. The eigen-frequencies yield the stability bound and the corresponding unstable mode. The considered beams lose its stability by flutter or divergence, depending on the location of intermediate support.