• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.113-128
• /
• 1995

The purpose of this study was to investigate the effect of stannous fluoride on the dentin bonding with three kinds of commercially available dentin bonding systems containing different adhesive monomers. Dentin specimens with exposed labial dentin prepared from freshly extracted bovine mandibular anterior teeth were divided into experimental and control groups. The specimens of experimental groups were bonded with dentin bonding systems and composite resins including All bond 2 ㅡ& Bisfil, Scotchbond Multi-Purpose & Z100, and Denthesive II Charisma after 2 % stannous& fluorided application for S minutes and washing for 1 minute. The specimens of control groups were bonded with the same dentin bonding systems and composite resins as used in the experimental groups. After bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, the tensile bond strength and cohesive failure rate were measured, and then the pretreated dentin surfaces and the fractured dentin surfaces were examined under scanning electron microscope. The results were as follows : Mean bond strength of stannous fluoride applied groups of All bond 2, Scotchbond MP, and Denthesive II were 2.5MPa, 1.1MPa, and 1.1MPa respectively, and those of control groups were 7.5MPa, 8.1MPa, and 4.6MPa. Bond strength values of stannous fluoride applied groups were significantly lower than those of the control groups(p<0.05). SEM findings of dentin surfaces after stannous fluoride application demonstrated an appearance of partially remained smear layer and smear plugs inspite of pretreatment with 10 % phosphoric aicd or maleic acid solution, and an appearance of smear layer covered surface under Denthesive II priming. But those of control groups commonly showed clean dentin surfaces without smear layer and smear plugs. On SEM observation of the fractured dentin-resin interface, while most of the specimens of stannous fluoride applied groups showed adhesive failure mode, those of All bond 2 and Scotchbond MP control groups showed mainly adhesive-cohesive mixed failure mode, and mainly adhesive failure mode in Denthesive II control group.

• 대한치과재료학회지
• /
• 제44권1호
• /
• pp.21-31
• /
• 2017

The purpose of this study was to fabricate a biocompatible fluoride varnish with sustained fluoride release, and to compare it with commercial fluoride varnishes. For the experimental fluoride varnish, bis-GMA (BG) or two types of rosin (KR-610: K0, KR-612: K2) were used as bases. Either ethyl acetate or ethanol was added as solvent and 5 wt% NaF was used. 5 mg of experimental F- varnishes and 2 commercial products, Cavity shield (CS) and Flor-opal (FO), were applied on a labial surface of bovine teeth ($10mm{\times}7mm$). The amount of fluoride release was measured at 1 hr, 2 hrs, 3 hrs, 4 hrs, 8 hrs, 12 hrs, 1 day, 3 days, 5 days, 10 days, 15 days, 20 days and 30 days. MTT test was done with diluted F- varnishes using ethanol. Statistical analysis was done with one-way ANOVA and Duncan multiple range test (${\alpha}=0.05$). BG showed the highest fluoride release at 1 hr (P<0.05), while that of K0 was highest at 2 hrs (P<0.05). From 1 day to 5 days, experimental fluoride varnishes showed higher fluoride release than the commercial products (P<0.05), and there were no significant differences after 5 days (P>0.05). For MTT test, K0 and FO showed higher cell viability than other experimental groups (P<0.05), with no significant differences with K2 (P>0.05). Considering the sustained fluoride release and cell viability of the experimental rosin-based fluoride varnishes compared with commercial products, it will be appropriate for clinical application.

• 한국물환경학회지
• /
• 제23권3호
• /
• pp.314-318
• /
• 2007

The feasibility of the employment of waste oyster shell as an adsorbent for fluoride ion has been tested by considering the effect ionic condition on the adsorption of fluoride ion on oyster shell. The adsorption capacity of oyster shell for fluoride ion was found not to be significantly influenced by the ionic strength of aqueous environment. The existence of complexing agent such as nitrilotriacetic acid in wastewater decreased the adsorbed amount of fluoride ion by forming a stable complex of $CaT^-$ and the adsorption reaction of fluoride ion on oyster shell was examined to be endothermic. The coexisting heavy metal ionic adsorbate in wastewater hindered the adsorption of fluoride ion, however, its adsorbed amount was increased as the particulate size of adsorbent was decreased. Finally, a serial adsorption column test has been conducted for a practical application of adsorption process and the breakthrough of the column adsorption was observed in 22 hours under the experimental condition.

• Journal of Oral Medicine and Pain
• /
• 제21권1호
• /
• pp.7-14
• /
• 1996

This study was performed to compare the anticarious effects of different fluoride agents(NaF, $NH_4F, TIF_4,$ APF gel, Elmex gel ) on artificial carious lesion. Enamel samples treated with 5 kinds of fluoride agents by pH cycling method were evaluated for fluorine uptake, enamel solubility, and microhardness. The results were as follows : 1. Greater fluoride uptakes were obtained in carious lesion treated with APF gel and $TiF_4$ solution than in that treated with other fluoride solutions. 2. TiF4 group was more resistant to acid than otter groups, but it was not significantly different with APF gel group. 3. Surface of enamel specimen was harkened by fluoride application and pH cycling. APF gel was more effective on enhancing surface hardness than control group. 4. APF gel, $NH_4F, TIF_4,$ solution were effective on fluoride uptake, enamel solubility, and microhardness.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.35-40
• /
• 2013

The present study was conducted to investigate the adsorption potential of red mud for fluoride removal. Different operation parameters such as the effect of contact time, initial concentration, pH, competing anions, seawater, adsorbent dose amount, and adsorbent mixture were studied. Nearly 3 hr was required to reach sorption equilibrium. Equilibrium sorption data were described well by Langmuir model and the maximum adsorption capacity of red mud was 5.28 mg/g. The fluoride adsorption at pH 3 was higher than in the pH range 5-9. The presence of anions such as sulfate, nitrate, phosphate, and bicarbonate had no significant effect on fluoride adsorption onto red mud. The fluoride removal by red mud was greater in seawater than deionized water, resulting from the presence of calcium and magnesium ion in seawater. The use of red mud alone was more effective for the removal of fluoride than mixing red mud with other industrial waste such as oyster shells, lime stone, and steel slag. This study showed that red mud has a potential application in the remediation of fluoride contaminated soil and groundwater.

• 치위생과학회지
• /
• 제15권1호
• /
• pp.46-53
• /
• 2015

본 연구는 향후 건강보험 급여화 방안 마련을 위한 기초자료로 활용하고자 시행되었으며, 구강보건인력의 전문가불소도포 건강보험 급여화에 대한 인식 및 요구를 조사 분석하여 다음과 같은 결론을 얻었다. 전문가불소도포 건강보험 급여화를 찬성(적극찬성 포함)하는 치과의사, 치과위생사는 각각 92.5%, 90.8%로 나타났고, 반대(강력히 반대 포함)하는 경우는 7.5%, 9.2%로 나타났다. 구강보건인력의 전문가불소도포 건강보험 급여화에 대한 찬성 이유는 치아우식증 예방이라는 응답이 치과의사는 72.5%, 치과위생사는 72.8%로 가장 많았다. 전문가불소도포 건강보험 급여화에 대한 반대 이유는 치과의사는 수입감소(38.5%)가, 치과위생사는 치과위생사 부족으로 업무과중화(46.2%)라는 응답이 가장 많았다. 전문가불소도포 건강보험 급여화시 적절한 연령은 초 중 고등학생(8~19세)이라는 응답이 치과의사에서 43.2%, 치과위생사에서 45.7%로 가장 많았다. 전문가불소도포 건강보험 급여화시 적절하다고 생각하는 본인부담금(평균값)은 APF겔, NaF, $SnF_2$용액 도포의 경우 치과의사가 25,782원, 치과위생사는 14,282원이었고 불소바니쉬도포는 치과의사가 31,705원, 치과위생사는 17,979원이었으며, 불소이온도입법은 치과의사는 40,156원, 치과위생사는 21,210원인 것으로 나타났다. 전문가불소도포 건강보험 급여화시 급여인정 횟수에 대해 치과의사에서는 무제한 급여(37.5%)가, 치과위생사에서는 2회(31.3%)라는 응답이 가장 많았다. 전문가불소도포는 우식예방효과가 매우 크고 이로 인한 건강보험 재정 절감효과가 있을 뿐만 아니라 장기적으로 전 국민의 구강건강증진 및 삶의 질 향상에 크게 기여할 것이라 생각되므로 건강보험 요양급여에 예방치과진료 항목으로 전문가불소도포가 포함되어야 하며, 전문가불소도포 건강보험 급여화시 대상 및 본인부담금은 구강보건인력의 의견을 적극적으로 반영하여 설정되어야 할 것이다.

• Journal of Oral Medicine and Pain
• /
• 제49권1호
• /
• pp.12-17
• /
• 2024

Dry mouth is common among older adults and significantly affects the oral health-related quality of life. It is a significant risk factor for dental caries, particularly root caries, in older adults due to concurrent periodontal disease and age-related comorbidities. Clinicians managing patients with dry mouth must be aware of preventive measures against dental caries. This clinical review aims to update our knowledge on the use of fluoride for caries prevention in order to establish better strategies for the management of dry mouth in older adults.

• 대한소아치과학회지
• /
• 제25권3호
• /
• pp.569-575
• /
• 1998

The purpose of this study was to evaluate the remineralization effects of fluoride-containing sealant on the artificially created enamel carious lesions. The fluoride release from the specimen of fluoride-containing sealants, the effect on enamel acid solubility and micro-hardness from the experimental sealants when applied to carious enamel surfaces were investigated. The obtained results were as follows; 1. Fluoride was a rapid rate of release during the first day, with the amount diminishing with time. The amount of fluoride released from Fuji Ionomer type III was higher than that from Teethmate-F and Helioseal-F during the 28 days of immersion(P<0.05). 2. The enamel solubility of carious enamel surface was higher than that in the Teethmate-F, Helioseal-F, and Fuji Ionomer type III (P<0.05), and there was no significant difference with Teethmate-A and Helioseal(P>0.05). 3. The microhardness value of carious enamel surface was lowest. However, there was no significant difference between the other sealants with respect to their effects on enamel hardness(P>0.05).

• Journal of Periodontal and Implant Science
• /
• 제13권1호
• /
• pp.65.1-65.1
• /
• 1983

• 대한소아치과학회지
• /
• 제24권3호
• /
• pp.660-677
• /
• 1997

The purpose of this study was to examine the morphological characteristics and combined effects of fluoride application and laser irradiation on artificial caries-like lesion formation in bovine enamel. Enamel specimens were divided into five experiment group and placed in no-treatment(group C), APF application alone(group F), laser irradiation alone(group L), APF application before laser irradiation (group FL), and APF application after laser irradiation(group LF) on artificial caries-like lesion. Sound enamel was used as a control group. The ultrastructural changes and physical effects of the fluorided and lased enamel has been investigated by using SEM, enamel solubility and microhardness test as well as distributions of calcium, phosphorus and fluoride in internal enamel by using EPMA. The following results were obtained. 1. In the all experiment groups, the amounts of dissolved calcium of enamel surfaces significantly decreased according to increasing exposure time of acid solution than control group(P<0.001). Group L showed higher than that group FL and LF in 30 and 60min(P<0.05). 2. The microhardness values of enamel surface in the control group was highest than that in the other experiment groups. Group F, L, FL and LF were significantly increased than group C(P<0.001). The enamel surface treated with APF produced deposites of numerous small globules and lased enamel showed a cracker-like appearance with microcrack and small pore. Numerous deposits were infiltrated in the fissured portion of enamel treated with APF after laser irradiation. 4. In the case of APF application alone, the elevation of the fluoride profile can be seen within $5{\mu}m$ of the outermost layer and a similar profile observed in the specimen treated with APF before laser irradiation. However, the specimen treated with APF after laser Irradiation showed a large elevation within $10{\mu}m$ of the outermost layer of the enamel. 5. The higher Ca/P ratios were observed in $10{\mu}m$ depth of lased and fluorided enamel when compared to the sound and carious enamel. The fluoride content decreased rapidly with distance from enamel surface, in the group F, fluoride concentration was significantly higher than that in the group C, L, FL, LF and control group according to increasing enamel depth (P<0.05).