• 한국항공우주학회지
• /
• 제40권11호
• /
• pp.957-962
• /
• 2012

비행체 구조는 공기력에 의해 변형이 발생하고 이 구조의 변형은 다시 공기력의 변화를 유발하므로 비행체 구조 시스템의 고정밀 설계를 위해서는 공력/구조 연계 해석이 필요하다. 그러나 발생하는 변형이 비선형 구조 해석을 요구할 정도로 큰 경우, 선형 시스템에서와 같이 공력 해석과 구조 해석을 순차적으로 반복하는 연계 해석 기법은 바람직하지 않다. 구조적 변형에 따라 변하는 공기력을 충분히 고려하지 못하며, 소요 시간 또한 크기 때문이다. 본 연구는 공력장 내부의 비선형 구조의 거동을 보다 효율적으로 예측할 수 있는 공력/구조 연계 해석 기법을 다룬다. 즉, 비선형 구조 해석 단계 도중에 주기적으로 공력 해석을 통한 외력 업데이트를 수행하는 알고리즘을 제안한다. 또한 고세장비의 유연날개를 가지는 글로벌 호크 모델을 사용하여 여러 가지 기법의 비선형 공력/구조 연계 해석의 결과를 비교하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1221-1230
• /
• 2008

Inflatable rubber dams are used for controlling flood, impounding water for recreations, preventing beach erosions, diverting water for irrigations, and generating hydropower. They are long, flexible, inflated with air, cylindrical structures on a rigid horizontal foundation such as concrete. The dam is modeled as an elastic shell inflated with air. The mechanical behaviors of the inflated dam model were investigated by using the finite element method. The analysis process such as One Way Coupling Fluid-Structure Interaction consists of two steps. First, the influences of the fluid side were investigated, viz, the shape changes of the inflated rubber dam due to the fluid motions was captured when the height of the dam was 30cm with air pressure 0.01MPa, at which the pressure distributions over the surface of the dam were calculated. And next, the structural deformations were calculated using the pressure distributions. The initial inlet velocity for flow field was set to 0.1m/s. The structural deformation behaviors were investigated. The final research goal is to develop a Korean Inflatable Rubber Dam to be used for generating small hydropower.

• International Journal of Ocean System Engineering
• /
• 제1권2호
• /
• pp.76-88
• /
• 2011

The present study deals with the hydroelastic vibration analysis of structures in contact with fluid via coupled fluid-structure interaction (FSI) embedded with a finite element method (FEM) such that a structure displacement formulation is coupled with a fluid pressure-displacement formulation. For the preliminary study and validation of FEM based coupled FSI analysis, hydroelastic vibration characteristics of a rectangular plate in contact with fluid are first compared with the elastic vibration in terms of boundary condition and mode frequency. Numerical results from coupled FSI analysis have been shown to be rational and accurate, compared to energy method based theoretical solutions and experimental results. The effect of free surface on the vibration mode is numerically studied by changing the submerged depth of a rectangular plate. As a practical application, the hull structural vibration of 4,000 twenty-foot equivalent units (TEU) container ship is considered. Hydroelastic results of the ship hull structure are compared with those obtained from the elastic condition.

• 한국전산구조공학회논문집
• /
• 제34권6호
• /
• pp.427-435
• /
• 2021

환경시설물, 댐과 같은 유체를 저장하는 시설물을 대상으로 엄밀하게 지진 거동을 평가하기 위해서는 유체-구조물 상호작용을 고려한 해석이 필요하다. 특히, 댐-호소 계와 같이 상류 방향으로 무한 영역을 가지는 경우에는 이를 적절히 고려해야 할 필요가 있다. 본 연구에서는 댐-호소 계와 같은 반무한 유체 영역을 갖는 시스템을 대상으로 무한 영역의 파전파 해석 및 유체-구조물 상호작용 해석을 위한 실용적인 수치 모형을 제시하였다. 시간영역에 적용가능한 방법으로 정확하면서도 경계적인 해석이 가능하다. 무한 유체 영역에 대해서는 일반 acoustic finite element 대신 작은 개수의 mid-point integrated acoustic finite element를 적용하고 최종 경계에는 점성경계를 부과한다. 제안하는 방법의 유효성과 정확성을 검증하기 위해 강체 댐체를 가정한 반무한 호소계를 대상으로 적용하는 요소의 개수, 모델링 영역 크기 등을 매개변수로 해석해와 비교·검증하였다. 제안된 방법을 적용하여 댐-호소 계의 유체-구조물 상호작용을 부가질량을 사용하는 경우와 비교하였다.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.108-117
• /
• 2004

Dynamic analysis method is Presented for analyzing rectangular liquid storage structures excited by horizontal and vertical ground motions. The irrotational motion of invicid and incompressible ideal fluid in rigid rectangular liquid storage structures subjected to horizontal and vertical ground motions and the motion of fluid induced by structural deformation are expressed by analytic solutions. Analysis methods are obtained by applying analytic solutions of the fluid motion to finite element equation of the structural motion. The fluid-structure interaction effect is reflected into the coupled equation as added fluid mass matrix. The free surface sloshing motion, hydrodynamic pressure acting on the wall and structural behavior due to horizontal and vertical ground motions are obtained by the presented method.

• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.29-35
• /
• 2012

Fluid-Structure Interaction analysis of a circular cylinder surrounded by incompressible turbulent flow is presented. The fluid flow is modeled by incompressible Navier-Stokes equations in conjunction with large-eddy simulation for turbulent vortical flows. The circular cylinder is modeled as elastic continuum described by elasto-dynamic equation of motion. Finite element method based approach is utilized for unified formulation of fluid-structure interaction analysis. The magnitude and frequency of structural response is analysed in comparison to the driving fluid forces.

• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.359-368
• /
• 2018

Dynamic analysis of complex and large structures may be costly from a numerical point of view. For coupled vibroacoustic finite element models, the importance of reducing the size becomes obvious because the fluid degrees of freedom must be added to the structural ones. In this paper, a component mode synthesis method is proposed for large vibroacoustic interaction problems. This method couples fluid subdomains and dynamical substructuring of Craig and Bampton type. The acoustic formulation is written in terms of the velocity potential, which implies several advantages: coupled algebraic systems remain symmetric, and a potential formulation allows a direct extension of Craig and Bampton's method to acoustics. Those properties make the proposed method easy to implement in an existing finite element code because the local numerical treatment of substructures and fluid subdomains is undifferentiated. Test cases are then presented for axisymmetric geometries. Numerical results tend to prove the validity and the efficiency of the proposed method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2011년도 정기 학술대회
• /
• pp.203-208
• /
• 2011

본 논문에서는 해양시추 생산설비의 상부구조(topside structure)에 설치된 공정설비(process module)에서 가스 누출에 의한 가스폭발 하중에 대한 해양구조물의 비선형 동적 거동응답 특성파악을 파악하기 위하여 LS-DYNA 코드의 유체-구조 연성(Fluid-Strycture Interaction) 해석기법을 적용하여 폭발 압력파를 보다 정확하게 구현하기 위한 기법을 개발하고자 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.959-963
• /
• 2006

A three-dimensional elastic blood vessel model with internal diameter variation is considered to investigate internal flow characteristics and effects of structural deformation. Also, computational analyses for both the rigid model and the fully-coupled FSI model have been conducted in order to compare the shear stress, pressure distribution, and flow velocity in detail. A 70% narrowing area of asymmetric blood vessel model was especially investigated to show the versatility of fluid-structure interaction phenomenon. The results reveal that effect of fluid-structure interaction is very important to accurately investigate the flow characteristics of the blood vessel.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.607-610
• /
• 2002

As machines become smaller and faster multileaf foil bearings are used to overcome the problems with heat, friction and wear Systems with foil bearings do not need a separate system for lubrication. These bearings are self acting and are therefore green systems. Until now, there have been many studies on the structural and dynamical performances. Therefore the object of the present study is to predict the flow and structural characteristics by using the Fluid/structure interaction method. The increase in RPM led to the increase in pressure, temperature difference, maximum velocity, Mach number, shear stress and torque. In the case of 90,000 RPM effects such as choking led to a non-lineararity in the system. Also the effect of eccentricity ratio was observed and showed that eccentricity increased the maximum pressure and the density difference while decreasing the shear stress and torque.