• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.386-395
• /
• 2010

The article is focused in three areas. In the first part there are analyzed the adhesion forces at the liquid and solid surface interface. There are shown the measured values of surface energy for different types of surfaces. The value of surface energy is decisive for determining the extent of the surface wettability by the liquid. The second part points to the possible negative effects of partly wettable surfaces, showing susceptibility to cavitation. The third section describes the practical aspects of surface wettability by the liquid. Under the new boundary conditions bases, expressing the effect of adhesion forces, there are determined the centrifugal pump characteristics.

• Coupled systems mechanics
• /
• 제7권6호
• /
• pp.649-668
• /
• 2018

In this paper, we present a numerical model for fluid-structure interaction between structure built of porous media and acoustic fluid, which provides both pore pressure inside porous media and hydrodynamic pressures and hydrodynamic forces exerted on the upstream face of the structure in an unified manner and simplifies fluid-structure interaction problems. The first original feature of the proposed model concerns the structure built of saturated porous medium whose response is obtained with coupled discrete beam lattice model, which is based on Voronoi cell representation with cohesive links as linear elastic Timoshenko beam finite elements. The motion of the pore fluid is governed by Darcy's law, and the coupling between the solid phase and the pore fluid is introduced in the model through Biot's porous media theory. The pore pressure field is discretized with CST (Constant Strain Triangle) finite elements, which coincide with Delaunay triangles. By exploiting Hammer quadrature rule for numerical integration on CST elements, and duality property between Voronoi diagram and Delaunay triangulation, the numerical implementation of the coupling results with an additional pore pressure degree of freedom placed at each node of a Timoshenko beam finite element. The second original point of the model concerns the motion of the outside fluid which is modeled with mixed displacement/pressure based formulation. The chosen finite element representations of the structure response and the outside fluid motion ensures for the structure and fluid finite elements to be connected directly at the common nodes at the fluid-structure interface, because they share both the displacement and the pressure degrees of freedom. Numerical simulations presented in this paper show an excellent agreement between the numerically obtained results and the analytical solutions.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.186-196
• /
• 2008

The dependence of the rheological properties of blood on shape, aggregation, and deformability of red blood cells (RBCs) has been investigated using hybrid systems by coupling fluid with solid models. We present a simple approach for simulating blood as a multi-component fluid, in which RBCs are modeled as droplets of acquired biconcave shape. We used lattice Boltzmann method (LBM) due to its excellent numerical stability as a simulation tool. The model enables us to control the droplet static shape by imposing non-isotropic surface tension force on the interface between the two components. The use of the proposed non-isotropic surface tension method is justified by the Norris hypothesis. This hypothesis states that the shape of the RBC is due to a non-uniform interfacial surface tension force acting on the RBC periphery. This force is caused by the unbalanced distribution of the lipid molecules on the surface of the RBC. We also used the same concept to investigate the dynamic shape change of the RBC while flowing through the microvasculature, and to explore the physics of the Fahraeus, and the Fahraeus-Lindqvist effects.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.186-196
• /
• 2008

The dependence of the rheological properties of blood on shape, aggregation, and deformability of red blood cells (RBCs) has been investigated using hybrid systems by coupling fluid with solid models. We present a simple approach for simulating blood as a multi-component fluid, in which RBCs are modeled as droplets of acquired biconcave shape. We used lattice Boltzmann method (LBM) due to its excellent numerical stability as a simulation tool. The model enables us to control the droplet static shape by imposing non-isotropic surface tension force on the interface between the two components. The use of the proposed non-isotropic surface tension method is justified by the Norris hypothesis. This hypothesis states that the shape of the RBC is due to a non-uniform interfacial surface tension force acting on the RBC periphery. This force is caused by the unbalanced distribution of the lipid molecules on the surface of the RBC. We also used the same concept to investigate the dynamic shape change of the RBC while flowing through the microvasculature, and to explore the physics of the Fahraeus, and the Fahraeus-Lindqvist effects.

• 태양에너지
• /
• 제18권3호
• /
• pp.95-105
• /
• 1998

In this study, basic design data which were required for development of highly efficient ice storage system with low temperature latent heat were experimentally obtained. The ice storage system considered in this study was the one that has been widly used in the developed country and called the ice-on-coil type. Using the system, the ice storage performance for various design parameters which were the flow direction and the inlet temperature of the secondary fluid was tested. In addition, the timewise variation of the interface profiles between the solid and the liquid were visualized, and the heat transfer characteristics of the Phase Change Material(PCM) in the ice storage tank were Investigated. During the freezing processes in the ice storage tank with several vertical tubes, decrease of the heat transfer area and the heat resistance of the ice layer made the increasing rate of ice packing factor(IPF) less. The total freezing energy for the upward flow of the secondary fluid was higher than that for the downward flow. The average ice storage efficiency for the upward flow of the secondary fluid was higher than that for the downward flow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2357-2362
• /
• 2008

LHP is different from a conventional heat pipes in design and heat and fluid flow passages. The situations of the former is much complex than the latter. In LHPs, evaporation occurs at the contact interface between the heating plate and the porous wick, so some micro channels machined at the contact interface serve to let the vapor flow out of the evaporator. This complexity of contact geometry was known to cause a high resistance to heat flow. The present work was to study the problem of heat passage across the contact surface for LHPs and determine those values contact resistance. For two cases of contact structures, the thermal contact resistances were examined experimentally, one being obtained through mechanical contact under pressure and the other through sintered bonding. Nickel powder wick and copper plate were used for specimens. The result showed that a substantial reduction of contact resistance of an order of degree could be obtainable by sintered bonding.

• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.461-468
• /
• 2012

In this study, a Cartesian-grid method based on finite volume approach is applied to simulate the ship motions in large amplitude waves. Fractional step method is applied for pressure-velocity coupling and TVD limiter is used to interpolate the cell face value for the discretization of convective term. Water, air, and solid phases are identified by using the concept of volume-fraction function for each phase. In order to capture the interface between air and water, the tangent of hyperbola for interface capturing (THINC) scheme is used with weighed line interface calculation (WLIC) method which considers multidimensional information. The volume fraction of solid body embedded in the Cartesian grid system is calculated using a level-set based algorithm, and the body boundary condition is imposed by a volume weighted formula. Numerical simulations for the two-dimensional barge type model and Wigley hull in linear waves have been carried out to validate the newly developed code. To demonstrate the applicability for highly nonlinear wave-body interactions such as green water on the deck, numerical analysis on the large-amplitude motion of S175 containership is conducted and all computational results are compared with experimental data.

• 대한기계학회논문집B
• /
• 제34권3호
• /
• pp.251-258
• /
• 2010

본 논문은 다기능 미소유체시스템의 일체형 패키징을 위한 MSI (microfluidic system interface) 기술을 제안하고, 이를 설계, 제작, 시험 평가하였다. MSI 기술을 통해 플러그 방식의 유체 인터커넥터, 유체제어를 위한 미소밸브, 광학 인터페이스를 위한 광학창을 유체시스템에 일체형으로 쉽게 구현할 수 있었다. MSI 기술의 유용성을 보이기 위해 미소 유전자시료전처리시스템에 적용되었으며, 미소 유전자시료전처리시스템은 세포정제, 세포분리, 세포용해, DNA 고체상추출, 중합효소연쇄반응, 그리고 모세관전기영동 기능으로 구성되었다. 나아가 MSI 기술이 적용된 미소 유전자시료전처리시스템의 DNA 고체상추출 및 중합효소연쇄반응의 실험결과로부터 MSI가 미소유체시스템을 위한 실용적 패키징 기술임이 검증되었다.

• 대한기계학회논문집
• /
• 제9권4호
• /
• pp.430-439
• /
• 1985

본 연구에서는 유한차분법을 사용하여 지배방정식의 수치해를 구하였으며, 특 히 유체와 고체 사이의 접촉면조건에서 correlation인자를 도입하여 K/$_{s}$/ $K_{f}$ 비가 큰 값에서는 수치해를 얻을 수가 있었다. 그리고 실험에서 여러가지 $K_{s}$/ $K_{f}$값에 대하여 온도를 측정하였으며, 여기서 계산치와 비교하면서 correlation인 자의 신뢰도를 조사하였다. 수평 이중 환상밀폐공간에서 유선 및 등온선을 여러가지 무차원 변수에 대하여 나타내었다. 등가 열전도도(equivalent conductivity)를 정의 하여 도입하고 $K_{s}$/ $K_{f}$값 중간 셸 두께, Prandtl 그리고 Rayleigh수에 대한 영향을 조사하여 이중 밀폐공간에서의 conjugate 자연대류 열전달특성을 연구하였다..였다..

• 대한기계학회논문집A
• /
• 제39권8호
• /
• pp.793-799
• /
• 2015

막대형 금속 구조물을 통하여 전파되는 종파와 횡파의 전달 현상을 전산구조해석 모델을 이용하여 시뮬레이션 하였으며 실험 결과와 비교 분석하였다. 실험 및 해석은 막대 구조물 전체가 알루미늄인 경우 및 파동 전파 경로인 알루미늄 막대 중간 부분에 액체층을 포함한 경우 등 두 가지 조건에 대해 수행되었다. 연구 결과 해석 및 실험을 통해 구한 종파 및 횡파 전파 특성과 전파 속도가 이론치와 잘 일치하는 것을 확인하였으며, 본 연구에서 이루어진 고체-유체 경계면을 가지는 구조물을 통과하는 파동 전파 해석을 위한 전산해석 모델링 기법은 고체-유체 상호작용을 고려해야 하는 보다 복잡한 시스템에 대해서도 확장 가능하다.