• Clinical and Experimental Pediatrics
• /
• v.50 no.1
• /
• pp.33-39
• /
• 2007

Purpose : In spite of medical advances, empyema is a serious complication of pneumonia in children. Vaccination practices and antibiotic prescribing practices promote the change of clinical manifestations of empyema and causative organisms. So we made a nationwide clinical observation of 122 cases of empyema in children from 32 hospitals during the 5 year period from September 1999 to August 2004. Methods : Demographic data, and clinical information on the course and management of empyema patients were collected retrospectively from medical records in secondary and tertiary hospitals in Korea. Results : One hundred twenty two patients were enrolled from 35 hospitals. The most frequent age group was 1-3 years, accounting for 48 percent of all cases. The male to female sex ratio was 1.2:1. The main symptoms were cough, fever, respiratory difficulty, lethargy and chest pain in order of frequency. Hematologic findings on admission revealed decreased hemoglobin levels ($10.4{\pm}1.6g/dL$) and increased leukocyte counts ($16,234.3{\pm}10,601.8/{\mu}L$). Pleural fluid obtained from patients showed high leukocyte counts ($30,365.8{\pm}64,073.0/{\mu}L$), high protein levels ($522.3{\pm}1582.3g/dL$), and low glucose levels ($88.1{\pm}523.5mg/dL$). Findings from pleural fluid cultures were positive in 80 cases(65.6 percent). The most common causative agent was Streptococcus pneumoniae. The majority of patients were treated with antibiotics and closed drainage. Some patients needed open drainage (16.4 percent) or decortication (3.3 percent). The mean duration of hospitalization was $28.6{\pm}15.3days$. Conclusion : We analyzed childhood empyema patients during a period of 5 years in Korean children. The most frequent age group was 1-3 years and the most common causative agent was Streptococcus pneumoniaeiae. The majority of patients were treated with antibiotics and close drainage.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.841-849
• /
• 2013

The aim of this study was to investigate the quality characteristics of Kimchi, prepared with seasoning fluid, vinegar, and mustard extract to inhibit the proliferation of microorganisms and extend the edible period during fermentation at $25^{\circ}C$. We also added perilla leaf, endive, and mustard leaf to Kimchi to improve the flavor. The pH of control Kimchi fluid over 1 day after Kimchi processing, was $5.40{\pm}0.01$ and that of the experimental groups in which vinegar and mustard extract were added was $4.51{\pm}0.01{\sim}4.52{\pm}0.01$, which was lower than that of the control. As the fermentation progresses, the pH of the control decreased rapidly and that of the experimental groups decreased slowly. The initial titratible acidity of the control was low and 3 days later reached $0.95{\pm}0.04$. However, that of the experimental groups was $0.42{\pm}0.01{\sim}0.43{\pm}0.02$ and 5 days later reached a level similar to that of the control. The salinities of the Kimchi juice of both the control and the experimental groups were $2.67{\pm}0.06{\sim}2.80{\pm}0.10$% after 1 day and decreased during fermentation. The amount of lactic acid bacteria of the control was $8.17{\pm}4.01{\times}10^8cfu/g$, 1 day after the Kimchi processing and that of the experimental groups was $2.70{\pm}2.08{\times}10^7{\sim}3.63{\pm}2.80{\times}10^7cfu/g$. After 3 days, these were $3.13{\pm}1.94{\times}10^{11}cfu/g$ and $2.47{\pm}2.23{\times}10^9{\sim}8.03{\pm}3.71{\times}10^9cfu/g$, respectively. According to the result of sensory evaluation, throughout the entire period of the experiment, all sensory items such as color, odor, taste, texture, and total acceptability of the experimental groups were better than those of the control group (p<0.05). Especially, Kimchi in which perilla leaf was added was the best. With the addition of vinegar and mustard extract to the Kimchi, microorganism proliferation was inhibited and the edible period was extended. The minerals, vitamins and antioxidants of leaf vegetables could therefore be obtained.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.359-382
• /
• 2017

Content is the complex of art and technology of trend, so it is important to experience different technologies for content education. Today, many non-profit organizations plan and operate numbers of programs for disabilities, low-income, and minority families to enhance the quality of life and the realization of social integration. These programs are limited to museums and galleries, not so pro-actively in progressing. Various contend education is necessary to the expansion of cultural exchange for the culturally alienated area. Naver is running an outreach program named . It is an experience-based outreach program where current cartoon / webtoon writers come directly to the school to inform students about the basic story of comics and comic techniques. However, the fact that the is not centered on the marginalized area but is centered on the Seoul Gyeonggi area, has the limitation that they can not benefit from a wide range of programs because they have a space limit of 'school', and, has a spatial limitation that the experience of the work is excluded. 'Outreach programs in marginalized areas' must be reorganized into a fluid dimension, not a fixed, single-system program. You should be able to experience and experience your work by directly using various professional equipment of comics based on your capacity and experience, local culture, religion, and society. These program participants will gain the effect of attractive and effective learning with empathy with their comic experience. Meanings of Comics content outreach program are following: First, the rich cultural archive can be used efficiently by providing various contents to existing outreach programs with the educational limitation of museums and galleries. Second, Comics contents can be enjoyed as a part of our life by understanding diversity and technology of contents. Third, because it is the program of expertise' participation, it can remodel, and restructure the severed experience in remote areas for the continuous growth and development, and furthermore, it can enhance the understanding of society.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.122-144
• /
• 1993

The Kimhae napseok clay deposit was studied to characterize its mineralogy and genesis. Geology of the deposit is composed of Tertiary volcanic rocks and granodiorite. Tertiary volcanic rocks consist of andesitic tuff with minor interstratified tuffaceous shale, and rhyodacitic tuff. The main ore body of 2.4 to 4 m in thickness developed parallel to the bedding of andesitic tuff bed. Its strike and dip are $N70^{\circ}E-N85^{\circ}E$ and $16^{\circ}NW-32^{\circ}NW$, respectively. Two alteration zones; the propylitic zone of albite-epidote-chlorite-quartz assemblage and advanced argillic zone of pyrophyllite-dickite-alunite-diaspore assemblage are developed. Correlation of $SiO_2$ to $Al_2O_3$ shows no relation in propylitic zone, while a negative linear relation in advanced argillic zone. Chemical variation shows that $SiO_2$, $Al_2O_3$, MgO, CaO, $Na_2O$ and $K_2O$ were leached out during hydrothermal alteration. Pyrophyllite, the most abundant mineral in advanced argillic zone, occurs as low temperature 2M polytype. It is closely associated with dickite, diaspore and alunite. The Hinckley index of dickite is 0.83 showing moderate crystallinity. Na content is increasing in the M site with the increasing content of cations in the R-site. the mole percent of Na replacing K in alunite ranges from 53.2 to 71.6. It is also found that pyrophyllite grows in the dissolution site of diaspore. Plagioclase was albitized. Lowering of pH caused mainly by sulfide and sulfate decomposition resulted in preferential leaching of Si. It is inferred that aluminum released from plagioclase in the volcanic rocks as well as from the tuffaceous shale intercalated in andesitic tuff were the main sources of aluminum required for the formation of clay deposit. pH in hydrothermal fluid decreased from propylitic zone to advanced argillic zone with increasing degree of alteration. Based on experimental data reported in the literature and mineral assemblages, the formation temperature of the deposit ranges 270 to $320^{\circ}C$.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.57-79
• /
• 1993

Chuncheon nephrite, which was formed by the polymetasomatic alteration of dolomitic marble, can be classified into pale green, green, dark green, and grey types on the basis of their occurrence, mineralogical and textural characteristics. The nephrites consist obiefly of fibrous or hairlike(length/width ratio>10) cryptocrystalline(crystal width < $2{\mu}m$) tremolite, and include less amounts of micro-crystalline diopside, calcite, clinochlore, and sphene as impurities. The oriented and rather curved crystal aggregate, of nephritic tremolite are densely interwoven, resulting in a massive-fibrous texture which may explain the characteristic toughness of nephritic jade. The characteristic greenish color of the nephrite may be preferably related to Fe rather than Cr and Ni. However, the variation of color and tint in the Chuncheon nephrite also depends on the mineralogical and textural differences such as crystallinity, texture, and impurities. The chemical composition of the nephritic tremolite is not stoichiometric and rather dispersed especially in the abundances of Al, Mg, and Ca. Al content and Mg/Ca ratio for the nephritic tremolite are slightly increased with deepening in greenish color of the nephrite. Fe content in the nephritic tremolite is generally very low, but comparatively richer in the dark green nephrite. In nephritic tremolite, wide-chain pyriboles are irregularly intervened between normal double chains, forming a chain-width disorder. Most nephritic tremolites in the Chuncheon nephrite show various type of chain-width defects such as triple chain(jimthompsonite), quintuple chain (chesterite), or sometimes quadruple chain in HRTEM observations. The degree of chain-width disorder in the nephritic tremolite tends to increase with deepening in greenish color. Triple chain is the most common type, and quadruple chain is rarely observed only in the grey nephrite. The presence of pyribole structure in the nephritic tremolite is closely related to the increase of Al content and Mg/Ca ratio, a rather dispersive chemical composition, a decrease of relative intensity in (001) XRD reflection, and an increase in b axis dimension of unit cell. In addition, the degree and variation of chain-width disorder with nephrite types may support that an increase of metastability was formed by a rapid diffusion of Mg-rich fluid during the nephrite formation.

• Journal of Korean Society of Forest Science
• /
• v.41 no.1
• /
• pp.1-6
• /
• 1979

1. The study was conducted on the optimum condition of the treated substrate with dilute sulphuric acid solution and cellulase for saccharification. The wood (saw dust) of Alnus hirsuta Rupr. (10~15 years) was treated with 0.3%, 0.6%, 0.9%, 1.2%, 1.5%, $H_2SO_4$ solution at $1.5kg/cm^2$ for 15min., 30min., 45min., and 60min., followed by thermal treatment at $190^{\circ}C$ for 30min., and screening with 60 mesh sieve, after which to 0.5 grams of each sample was added 0.5ml cellulase solution, and 50ml 0.1M acetic acid buffer solution (pH 5.0), after incubating at $40^{\circ}C$ for 96hr. 2. The crude cellulase of Trichoderma viride Perx. ex. Fr. SANK 16374 was produced by the submerged culture process and produced in the culture fluid was salted out quantitatively by the use of ammonium sulfite. 3. Reducing sugar was determined by the 3.5-dinitrosalicylic acid (DNS) method. 4. The reducing sugar was increased with increase of the sulphuric acid concentration and saw dust was treated with 1.5% $H_2SO_4$ solution at $1.5kg/cm^2$ for 45min. showed the best saccharification (16.0%). The reducing sugar formation did not show statistically significant in 5% levels by thermal treatment time 45min. and 60min. 5. The substrate for cellulase which was treated with 0.9% $H_2SO_4$ solution at $1.5kg/cm^2$ for 60min. showed the best reducing sugar formation (23.6%). And did not show significant difference in 5% levels at 0.9%, 1.2%, and 1.5% $H_2SO_4$ solution.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.2
• /
• pp.169-178
• /
• 2010

The present study was conducted with four ruminally fistulated cattle to examine the fermentation characteristics and effective degradability (ED) in the rumen, and whole tract digestibility and TDN values of various silages (whole crop rye, RS; whole crop barley, BS; Italian ryegrass, IRGS and sudangrass, SGS) which were produced in Korea. The pH of rumen fluid were not greatly affected by silage at most times after feeding but SGS decreased (p<0.049) the ruminal ammonia-N concentration as 7.28 mg/100 ml at 3h after feeding compared to other silages. An acetate proportion from SGS feeding was higher at 1h (p<0.018), 3h (p<0.004) and 6h (p<0.019) after feeding than those from other silages. The propionate ($C_2$) proportion, however, was greater (p<0.001~p<0.042) for the RS and BS than the corresponding values of other silages up to 6h after feeding while the lowest $C_2$ proportion was observed from SGS. The butyrate proportion was lowest (p<0.007~p<0.027) in the cattle fed BS at 1~6h after feeding among silages. An ED of dry matter (DM) in the rumen was highest (P<0.048) for RS as 59.64%, and was reduced in the order of BS (56.12%), IRGS (55.64%) and SGS (54.02%). Similar tendency was observed in the EDs of crude protein (p<0.014) and organic matter (OM, p<0.039). The whole tract digestibility of DM (p<0.032), neutral detergent fiber (NDF, p<0.034) and OM (p<0.041) of SGS was greatly reduced. The TDN value based on whole tract digestibility of silages was highest for RS as 61.1%, and TDN values of BS, IRGS and SGS were 57.1%, 57.9% and 50.7%, respectively. Based on the results obtained from the present study, components in various whole crop silages produced in Korea might affect the ruminal VFA proportion, and especially, NDF content could greatly influence on the TDN value of silage calculated based on the NDF content.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.3_4
• /
• pp.259-270
• /
• 2002

A small granodiorite-quartz monzonitic stock containing sericitic and propylitic alteration assemblages hosts a Cu-W breccia-pipe deposit in the southeastern Cyeongsang basin. The mineralized breccia-pipe contains angular to subangular brecciated fragments of granitic rocks showing clast-supported textures. An assemblage of quartz, tourmalines, sulfide minerals (mainly chalcopyrite, arsenopyrite and pyrrhotite) and calcite was precipitated as a hydrothermal cement between the brecciated fragments. A tourmaline aureole surrounds the breccia pipe. Extensive tourmalinization of the granitic rocks near and within the pipe and no tourmalinization in the sedimentary and volcanic rocks. The tourmalines are marked by Fe-rich, black charcoal-like schorl (80 mol% schorl relative) nearer the schorl-dravite solid solution. The chemical changes in the hydrothermal fluid are reflected by variations in compositional Boning from cores to rims. They generally contain cores with low values of Fe/(Fe+Mg) and high values of Na/(Na+ca) relative to rims. This is because of an increase Fe and Ca contents toward rims. The main trend of these variations is a combination of the exchange vectors Ca(Fe, Mg) $(NaAl)_{- }$ $_1$ and $Fe^{3}^{+}$ $Al_{[-10]}$ $_1$ It is thought that boiling causes the loss of $H_2$ into the vapor phase resulting in the oxidation of Fe in the aqueous phase. pH of the melt would be one of important controlling factors for the tourmaline stability. The tourmalines could be precipitated when the system evolved to the acidic hydrothermal regime as most hydrothermal brines and acidic gases exsolved from the magma. The Ilgwang tourmaline crystallization is products of hypogene orthomagmatic hydrothermal processes that were strongly pipe-controlled.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.1
• /
• pp.25-39
• /
• 1994

The Deogbong napseok clay deposit which is composed mainly of dickite and pyrophyllite has been formed by hydrothermal alteration of the Late Cretaceous volcanic rocks consisting of andesitic tuff and andesite. The mineralogy of the napseok ores and the hydrothermal alteration processes have been studied in order to know the nature of the interaction between minerals and fluids for the formation of the deposit. Chemical distribution shows that alkali elements and silica were mobile but alumina was relatively immobile during the hydrothermal processes. It is evident that enrichment of alumina and leaching of silica from the host rock led to the formation of the napseok ore, whereas the enrichment of silica in the outer zone of the deposit gave rise to the silica zone. A large amount of microcrystalline quartz closely associated with dickite and pyrophyllite suggests the increasing activity of silica. Thus Si which was released away from the argillic zone by the increasing activity of silica. Thus Si which was released away from the argillic zone by the increasing activity of silica solubility moved out precipitating in the margin of the deposit to form the silica zone. Variation in dickite crystallinity implies the local change in the stability of the system. Thermodynamic calculation shows that the invariant point of pyrophyllite-dickite (kaolinite)-diaspore-quartz assemblages at 500 bars in the system $Al_{2}O_{3}-SiO_{2}-H_{2}O$ is about 300 $^{\circ}C$. Based on the mineral assemblages and the experimental data reported, it is estimated that the main episode of hydrothermal alteration occurred at least above 270 to 300 $^{\circ}C$ and $X_{CO_2}$ <0.025. Mineral occurrence and chemical variation indicate that the activity of Al is high in the upper part of the deposit, whereas the activity of Si is high in the lower part and the margin of the deposit. The nonequilibrium phase relations observed in the Deogbong deposit might be due to local change in intensive thermodynamic variables and fluid transport properties that resulted in the formation of nonequilibrium phases b of several stages.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.254-259
• /
• 2014

A pressurized heavy water reactor (PHWR) core has 380 fuel channels contained and supported by a horizontal cylindrical vessel known as the calandria, whereas a pressurized water reactor (PWR) has only a single reactor vessel. The pressure tube, which is a pressure-retaining component, has a 103.4 mm inside diameter ${\times}$ 4.19 mm wall thickness, and is 6.36 m long, made of a zirconium alloy (Zr-2.5 wt% Nb). This provides support for the fuel while transporting the $D_2O$ heat-transfer fluid. The simple tubular geometry invites highly automated inspection, and good approach for all inspection. Similar to all nuclear heat-transfer pressure boundaries, the PHWR pressure tube requires a rigorous, periodic inspection to assess the reactor integrity in accordance with the Korea Nuclear Safety Committee law. Volumetric-based nondestructive evaluation (NDE) techniques utilizing ultrasonic and eddy current testing have been adopted for use in the periodic inspection of the fuel channel. The eddy current testing, as a supplemental NDE method to ultrasonic testing, is used to confirm the flaws primarily detected through ultrasonic testing, however, eddy current testing offers a significant advantage in that its ability to detect surface flaws is superior to that of ultrasonic testing. In this paper, effectiveness of flaw detection and the depth sizing capability by eddy current testing for the inside surface of a pressure tube, will be introduced. As a result of this examination, the ET technique is found to be useful only as a detection technique for defects because it can detect fine defects on the surface with high resolution. However, the ET technique is not recommended for use as a depth sizing method because it has a large degree of error for depth sizing.