• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1705-1714
• /
• 2019

Objective: Reducing roughage feeding without negatively affecting rumen health is of interest in ruminant nutrition. We investigated the effects of roughage sources and concentrate types on growth performance, ruminal fermentation, and blood metabolite levels in growing cattle. Methods: In this 24-week trial, 24 Hanwoo cattle ($224{\pm}24.7kg$) were fed similar nitrous and energy levels of total mixed ration formulated using two kinds of roughage (timothy hay and ryegrass straw) and two types of concentrate mixes (high starch [HS] and high fiber [HF]). The treatments were arranged in a $2{\times}2$ factorial, consisting of 32% timothy-68% HS, 24% timothy-76% HF, 24% ryegrass-76% HS, and 17% ryegrass-83% HF. Daily feed intakes were measured. Every four weeks, blood were sampled, and body weight was measured before morning feeding. Every eight weeks, rumen fluid was collected using a stomach tube over five consecutive days. Results: The mean dry matter intake (7.33 kg) and average daily gain (1,033 g) did not differ among treatments. However, significant interactions between roughage source and concentrate type were observed for the rumen and blood parameters (p<0.05). Total volatile fatty acid concentration was highest (p<0.05) in timothy-HF-fed calves. With ryegrass as the roughage source, decreasing the roughage inclusion rate increased the molar proportion of propionate and decreased the acetate-to-propionate ratio; the opposite was observed with timothy as the roughage source. Similarly, the effects of concentrate types on plasma total protein, alanine transaminase, Ca, inorganic P, total cholesterol, triglycerides, and creatinine concentrations differed with roughage source (p<0.05). Conclusion: Decreasing the dietary roughage inclusion rate by replacing forage neutral detergent fiber with that from non-roughage fiber source might be a feasible feeding practice in growing cattle. A combination of low-quality roughage with a high fiber concentrate might be economically beneficial.

• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.9-17
• /
• 1995

The Kamkye Cu-Pb-Zn-Au-Ag deposits occur as quartz veins that filled fault-related fractures of NW system developed in the Cretaceous Gyeongsang basin. Three major stages of mineral deposition are recognized: (1) the stage I associated with wall rock alteration, such as sericite, chlorite, epidote and pyrite, (2) the early stage II of base-metal mineralization such as pyrite, hematite, and small amounts of sphalerite and chalcopyrite. and the middle to late stage II of Cu-As-Sb-Au-Ag-S mineralization, such as sphalerite, chalcopyrite, galena with tetrahedrite, tennantite, pearceite, Pb-Bi-Cu-S system, argentite and electrum. (3) the stage III of supergene mineralization, such as covellite, chalcocite and malachite. K-Ar dating of alteration sericite is a late Cretaceous ($74.0{\pm}1.6Ma$) and it may be associated with granitic activity of nearby biotite granite and quartz porphyry. Fluid inclusion data suggest a complex history of boiling, cooling and dilution of ore fluids. Stage II mineralization occurred at temperatures between 370 to $220^{\circ}C$ from fluids with salinities of 8.4 to 0.9 wt.% NaCl. Early stage II($320^{\circ}C$, 2.0 wt.% NaCl) may be boiled due to repeated fracturing which opened up the hydrothermal system to the land surface, and which resulted in a base-metal sulfide. Whilst the fractures were opened to the surface, mixing of middle-late stage II ore fluids with meteoric waters resulted in deposition of Cu-As-Sb-Au-Ag minerals from low temperature fluids(${\leq}290^{\circ}C$). Boiling of ore fluids may be occured at a pressure of 112 bar and a depth of 412 m. Equilibrium thermodynamic interpretation of sphalerite-tetraherite assemblages in middle stage II indicates that the ore-forming fluid had log fugacities of $S_2$ of -6.6~-9.4 atm.

• Economic and Environmental Geology
• /
• v.29 no.2
• /
• pp.139-150
• /
• 1996

The Yucheon Bi deposits at Cheongha, Gyeongsangbugdo, is of a middle Paleogene (49 Ma) vein type, and is hosted in sandstone and shale of Banyawal formation in Cretaceous age. Based on mineral paragenesis, vein structure and mineral assemblages, two minera1ization stages were distinguished. The stage I consists of quartz with small amount of chlorite, pyrite, epidote, hal1oysite, vermiculite, serpentine and rutile associated with sericitization. The stage II is characterized by Bi minera1ization such as bismuthinite, Bi-Cu-Pb-S mineral, tetradymite, native gold, pyrite, pyrrhotite, arsenopyrite, wolframite, rutile, hematite, sphalerite, chalcopyrite, galena with alteration of sericite, chlorite, K-feldspar, albite and epidote. Fluid inclusion data indicate that fluid temperature and NaCl equivalent wt.% salinity range from 431 to $150^{\circ}C$ and from 19.2 to 0.18wt.% in the stage II. Evidence of boiling during the base-metal minera1ization indicates pressures 241 to 260 bars. Sulfur fugacity($-log\;f_{S2}$) deduced by mineral assemblages and compositions ranges from 5.1 to 5.7atm in early stage, from > 8.4 atm in middle stage and from 13.5 to 19.3 atm in late stage. It suggests that complex histories of progressive coo1ing, dilution and boiling were occurred by the mixing of the fluids. The ${\delta}^{34}S$, ${\delta}^{18}O$ and ${\delta}D$ data range from 2.5 to 3.9%, -0.5 to -4.1% and -29.7 to -47%, respectively. It indicated that hydrothermal fluids may be magmatic origin with boiling and mixing of meteoric water increasing paragenetic time.

• Economic and Environmental Geology
• /
• v.20 no.1
• /
• pp.1-18
• /
• 1987

The Cheolam silver deposits are emplaced along the fractures in breccia dike and the Hongjesa granite. Breccia dike contains fragments of late Cretaceous acidic volcanic rocks and other fragments of various rocks distributed in the mine area. Therefore it is presumed that the mineralization was taken place in later than late Cretaceous time. Mineral paragenesis is complicated by multiple episodes of fracturing. Six distinct depositional stages can be recognized: stage I, deposition of base metal sulfides; stage II, deposition of base metal sulfides and silver minerals; stage III, deposition of carbonates; stage IV, deposition of silver minerals and base metal sulfides; stage V, deposition of silver minerals; stage VI, deposition of barren quartz. Silver minerals from the deposits are native silver, acanthite, pyrargyrite, argentian tetrahedrite, stephanite, polybasite, pearceite, allargentum, antimonial silver and electrum. Fluid inclusion studies ware carried out for stage I, II, IV and VI quartz and stage III calcite. Homogenization temperatures for each stage are as follows: stage I, from $225^{\circ}$ to $360^{\circ}C$; stage II, from $145^{\circ}$ to $220^{\circ}C$; stage III, from $175^{\circ}$ to $240^{\circ}C$; stage IV, from $130^{\circ}$ to $185^{\circ}C$; stage VI, from $120^{\circ}$ to $145^{\circ}C$. Salinities of ore fluids were in the range of 4 and 10 wt.% equivalent NaCl over stage I and stage VI. Ore mineralogical data of each stage indicate that temperatures are within the range of homogenization temperature of fluid inclusions and sulfur fugacities declined steadily from $10^{-9.7}atm$. to $10^{-18.7}atm$. through stage I into stage V.

• Economic and Environmental Geology
• /
• v.24 no.2
• /
• pp.107-129
• /
• 1991

The Yonghwa gold-silver deposits are emplaced along $N15^{\circ}{\sim}25^{\circ}W$ trending fissures in middle Cretaceous porphyritic granite or Precambrian Sobaegsan gneiss complex. The results of paragenetic studies suggest that vein filling can be subdivided into four identifiable stages; state I: the main sulfide stage, characterized by base-metal sulfide minerals, iron oxides and minor electrum, stage II: electrum stage, stage III: electrum and silver-bearing sulfosalts stage, stage IV: post ore stage of carbonates and quartz. The ore mineralogy suggests that depositional temperature of the formation of the gold and silver minerals are estimated as 200 to $250^{\circ}C$ and 140 to $180^{\circ}C$, respectively. Sulfur fugacity of the formation of the gold and silver minerals are estimated as $10^{-14.0}$ to $10^{-12.2}$ atm and $10^{-18.5}$ to $10^{-17.2}$ atm, respectively. A consideration of the pressure regime during ore deposition bases on the fluid inclusion evidence of boiling suggests lithostatic pressure of less than 180 bars. This range of pressure indicate that vein system lay at depth of 700m below the surface at the time during mineralization. Salinities of ore-bearing fluids range from 0.4 to 6.9 wt.% equivalent NaCl. The sulfur and carbon isotopic data reveal that these elements were probably derived from a deep-seated source. The ${\delta}^{18}O$ of the hydrothermal fluid was determined from ${\delta}^{18}O$ values of quartz and calcite. Oxygen and hydrogen isotopic studies reveal that meteoric water dominate over ore-bearing fluid.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.203-210
• /
• 2002

In order to elucidate the growth mechanism of sulfide chimney formed as a result of seafloor hydrothermal mineralization, we carried out the mineralogical and fluid inclusion studies on the inactive, sulfide- and silica-rich chimney which has been recovered from a hydrothermal field in the Cleft segment of the Juan de Fuca Ridge. According to previous studies, many active and inactive vents are present in the Cleft segment. The sulfide- and silica-rich chimney is composed of amorphous silica, pyrite, sphalerite and wurtzite with minor amounts of chalcopyrite and marcasite. The interior part of the chimney is highly porous and represents a flow channel. Open spaces within chimneys are typically coated with colloform layers of amorphous silica. The FeS content of Zn-sulfides varies widely from 13.9 to 34.3 mole% with Fe-rich core and Fe-poor rims. This variation possibly reflects the change of physicochemical characteristics of hydrothermal fluids. Chemical and mineralogical compositions of the each growth zone are also varied, possibly due to a thermal gradient. Based on the microthermometric measurements of liquid-rich, two-phase inclusions in amorphous silica that was precipitated in the late stage of mineralization, minimum trapping temperatures are estimated to be about 1140 to 145$^{\circ}$C with the salinities between 3.2 and 4.8 wt.% NaCI equiv. Although the actual fluid temperatures of the vent are not available, this study suggests that the lowtemperature conditions were predominant during the mineralization in the hydrothermal field at Cleft segment. Comparing with the previously reported chimney types, the morphology, colloform texture, bulk chemistry, and a characteristic mineral assemblage (pyrite + marcasite + wurtzite + amorphous silica) of this chimney indicate that the chimney have been formed from a relatively low-temperature (<250$^{\circ}$C) hydrothermal fluid that was changed by sluggish fluid flow and conductive cooling.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.2
• /
• pp.63-71
• /
• 2002

This paper examines the ASCE first generation benchmark problem for a seismically excited cable-stayed bridge, and proposes a new semi-active control strategy focusing on inclusion of effects of control-structure interaction. This benchmark problem focuses on a cable-stayed bridge in Cope Girardeau, Missouri, USA, for which construction is expected to be completed in 2003. Seismic considerations were strongly considered in the design of this bridge due to the location of the bridge in the New Madrid seismic zone and its critical role as a principal crossing of the Mississippi River. In this paper, magnetorheological(MR) fluid dampers are proposed as the supplemental damping devices, and a clipped-optimal control algorithm is employed. Several types of dynamic models for MR fluid dampers, such as a Bingham model, a Bouc-Wen model, and a modified Bouc-Wen model, are considered, which are obtained from data based on experimental results for full-scale dampers. Because the MR fluid damper is a controllable energy-dissipation device that cannot add mechanical energy to the structural system, the proposed control strategy is fail-safe in that bounded-input, bounded-output stability of the controlled structure is guaranteed. Numerical simulation results show that the performance of the proposed semi-active control strategy using MR fluid dampers is quite effective.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.273-281
• /
• 2022

Mantle heterogeneity is closely related to the distribution and circulation of volatile components in the Earth's interior, and the behavior of volatiles in the mantle strongly influences the rheological properties of silicate rocks. In mantle xenoliths, these physicochemical properties of the upper mantle can be recorded in the form of microstructures and fluid inclusions. In this paper, I summarized and reviewed the results of previous studies related to the characteristics of microstructures and fluid inclusions from peridotite xenoliths beneath the Rio Grande Rift (RGR) in order to understand the evolution and heterogeneity of upper mantle. In the RGR, the mantle peridotites are mainly reported in the rift axis (EB: Elephant Butte, KB: Kilbourne Hole) and rift flank (AD: Adam's Diggings) regions. In the case of the former (EB and KB peridotites), the type-A lattice preferred orientation (LPO), formed under low-stress and low-water content, was reported. In the case of the latter (AD peridotites), the type-C LPO, formed under low-stress and high-water content, was reported. In particular, in the case of AD peridotites, at least two fluid infiltration events, such as early (type-1: CO₂-N₂) and late (type-2: CO₂-H₂O), have been recorded in orthopyroxene. The upper mantle heterogeneity recorded by these microstructures and fluid inclusions is considered to be due to the interaction between the North American plate and the Farallon plate.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.2
• /
• pp.117-125
• /
• 2000

A series of simulations were carried out to test the accuracy of a CFD (Computational Fluid Dynamics) model for flow and dispersion problems around buildings. The basic equations involved are Reynolds-averaged Navier-Stokes equations. Two different cases were selected to estimate the accuracy of a CFD model. Case 1 adopted Euler equations, which are obtained by neglecting the viscous fluxes, which can be closed by the $textsc{k}$-$\varepsilon$model for a turbulent close problem. The results of both cases were compared with wind tunnel data. The results for Case 2 were closer to the wind both cases were compared with wind tunnel data. The results for Case 2 were closer to the wind tunnel data than Case 1. Accordingly, this indicates that the inclusion of viscous fluxes in a CFD model is required for the simulation of flow and 야spersion around buildings.

• Economic and Environmental Geology
• /
• v.18 no.1
• /
• pp.11-22
• /
• 1985

The Daehwa and Donsan tungsten-molybdenum deposits are composed of numerous fissure-filling veins developed in Precambrian gneiss and Cretaceous granite and quartz porphyry. K-Ar age of biotite in granite and that of muscovite in ore veins are $105{\pm}5\;Ma$ and 88.2~88.6 Ma respectively. Occurrence of ore deposits shows that relevant igneous rock is possibly quartz porphyry rather than above mentioned granite in temporal view point. Vein structure and mineralogy suggest that ore veins were formed by continuous vein filling, not by repeated mineralization. Three distinct depositional stages with decreasing age can be devided on the basis of mineral paragenesis and fluid inclusion studies: Stage I, deposition of oxides and silicates; stage II, deposition of base-metal sulfides and sulfosalts with carbonates; stage III, deposition of barren calcite and fluorite. Tungsten, molybdenum and tin mineralization occurred in stage I.