• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.301-307
• /
• 1996

High flowing concrete has been made using a combination of much amount cementitious materials and addition of SP agents, so that it makes possible to high flowing properties of fresh concrete. In the fluid mechanical and rheological point of view, high flowing concrete is affected on the relation between cement paste and aggregate of volume. In this experimental study, it is measured high flowing concrete of slump-flow about 65$\pm$5cm according to 0.54~0.80 of volume ratio and to analysed the properties of high flowing concrete in fresh and hardened concrete. It is the aim of this study to consider the affection of high flowing properties accoring to cement paste to aggregate ratio of volume on the combination of concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.369-372
• /
• 2008

본 연구에서는 소요의 유동성능 및 공기량을 확보할 수 있는 병용계 보통강도 고유동 자기충전 콘크리트를 제조하기 위하여 증점제 및 소포제 첨가량를 변화시킨 병용계 고유동 자기충전 콘크리트의 유동 특성을 실험적으로 분석 고찰하였다. 실험결과 증점제를 첨가한 병용계 고유동 자기충전 콘크리트의 Slump flow는 증점제 첨가량이 0.2%(${\times}$W %)일 때 가장 증가하였으며 증점제 첨가량이 높아질 경우 JSCE 기준안(2등급)에서 제시한 V-funnel의 유하시간 규정값을 크게 벗어나는 결과가 나타났다. 또한 증점제, 소포제 및 AE제를 첨가한 배합을 제외한 모든 배합이 목표 공기량 $4.5{\pm}1.5%$를 만족하지 못하였으며, 소포제를 첨가한 병용계 고유동 자기충전 콘크리트 배합은 최초배합 후 시간의 경과에도 불구하고 공기량(A1=1.5%)이 다소 감소하는 결과가 나타났다. 이러한 결과를 통하여 병용계 고유동 자기충전 콘크리트 제조시 소요의 유동성능을 얻기 위한 최적의 혼화제량을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.497-500
• /
• 2008

본 연구에서는 보통강도 고유동 자기충전 콘크리트의 수화발열 특성을 알아보기 위하여 미소수화열 시험 및 간이 단열에 의한 콘크리트 온도 상승량 실험을 실시하였다. 미소수화열 시험을 실시한 결과 석회석미분말 및 플라이애시를 혼화재로 사용한 고유동 자기충전 콘크리트는 단위시멘트량 감소로 수화발열량이 감소하였다. 간이 단열에 의한 콘크리트 온도 상승량을 측정한 결과 분체량이 많은 고유동 자기충전 콘크리트가 혼화재의 영향으로 온도저감 성능이 우수 하며, 3성분계 고유동 자기충전 콘크리트의 경우 일반콘크리트와 유사한 온도상승속도를 나타내었다. 이러한 결과 고유동 자기충전 콘크리트가 일반콘크리트보다 상대적으로 높은 단위 분체량에 대한 온도저감 성능이 우수 하며, 설계기준강도 30MPa의 3성분계가 2성분계 고유동 자기충전 콘크리트보다 온도저감 및 초기 수화발현에 유리할 것으로 판단된다.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.318-321
• /
• 2000

Most compressive strengths commonly used in the construction field are in a range of 240 to 300 kgf/$\textrm{cm}^2$ at 28 days. To get this rage of strengths, however, high-flowing concrete requires cementitious binders more than 400 to 450 kg/$\textrm{cm}^2$ for preventing segregation and sedimentation of aggregates. This amount of cementitious binder generates a large emission of excessive hydration heat, which may consequently induce harmful cracks in concrete structure. In order to reduce excessive hydration heat, thus, this paper aims at fabricating a high-flowing concrete under the condition that cement content is kept as low as 350kg/$\textrm{cm}^3$ by using viscose agents. In a parametric study, effects of cement types such as a ternary blended cement and Type V on he physical characteristics of high-flowing concrete were evaluated. In addition, the influence of viscosity was also investigated by applying two different viscose agents, one in a range of 6,000 to 10,000 cps and the others of 10,000 to 14,000 cps. In terms of chemical admixtures used in concrete mixture, the superplasticizer was Sulfonated Melamine-Formaldehyde Condensate with about 30,000 of molecular weight, and main component of viscose agent was HPMC (Hydroxy Propyl Methyl Cellulose). Slump flow was fixed at 50cm with different dosages of superplasticizer in weight.

• 한국환경복원기술학회지
• /
• 제16권1호
• /
• pp.181-191
• /
• 2013

The design process of ecological and environmental detention system located in the housing district of Sinjeong 3-jigu in Seoul are as follows. At stage one, a new dispersal detention was created in the neighborhood park located near the originally planned detention. From this, the amount of storage of this dispersal detention system was enlarged from $28,337m^3/d$, the initial storage amount, to $33,606m^3/d$ as the post storage amount, responsible to the amount of rainfall which happens every 100 years. In particular, the SSB (Sustainable Structured wetland Biotop) system, which was the New Excellent Technology verified by the Ministry of Environment (No. 258) was applied to enhance ecological functioning and water quality with the detention as a constructed wetland. At stage two, the treatment plans for non-point pollutant source occurred at the initial period of rain, flowing into the detention system were built for purifying the water of the retention pond at the base of the detentions, and the water-circulation system was designed at the dispersal detentions on the period of regular rainfalls. The non-point pollutant source flowing into detention site was calculated as $11,699m^3/d$ flowing down from seven small watersheds, which occurred at the initial period of rain. In particular the SSB systems improved the average efficiency of the water processing performance to BOD 60%, SS 90%, T-N 30%, T-P 60%. At stage three, the ecological network and biological diversity were strongly considered so that it brought the residents with amenity places. In particular, the dispersal detentions were successfully designed to restore the ecological habitat of endangered plant and animal species such as narrow-mouthed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.44-47
• /
• 2003

High flowing concrete has not spread whole in the normal concrete structure, because it requires special quality control technique. Recently owing to the lack of natural resources and reinforcement of environmental standard, the construction cost of cement is rapidly increased. Also ready mixed concrete industry has gone through various economical difficulty as the manufacture cost of concrete is increased. So, the purpose of this study is to evaluate the qualities of middle fluidity concrete using the fly-ash and portland blast-furnace slag cement in order to decrease the amount of cement and resolve the problem of the quality control of high flowing concrete and the manufacture cost. The results of this study show that it reduces the amount of addition of superplasticizer and develope properties of concrete to the use the fly-ash and portland blast-furnace slag cement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.9-12
• /
• 2003

High flowing concrete has not spread whole in the normal concrete structure, because it requires special quality control technique. And recently owing to the lack of natural resources and reinforcement of environmental standard, the construction cost of cement is increased rapidly. Also remicon industry has gone through various economical difficulty as the manufacture cost of concrete is increased. So, the purpose of this study is to evaluate the qualities of middle fluidity concrete using the fly-ash and portland blast-furnace slag cement in order to decrease the amount of cement and resolve the problem of the quality control of high flowing concrete and the manufacture cost. The results of this study show that it reduce the amount of addition of superplasticizer and develope properties of concrete to the use the fly-ash and portland blast-furnace slag cement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.112-116
• /
• 1996

This experimental study was performed to produce high flowing nomal strength concrete using viscosity agent. Test variables were selected to the viscosity agent contents with 4 levels, the cement contents with 5 levels and the coarse aggregate contents with 3 levels, etc. As a result, the high flowing and filling properties of concrete were obtatined by proper amount of viscosity agent and superplasticizer in the normal strength concrete. For the concrete mix proportions, it was found that unit weight of cement was more than 364kg/㎥ and volume of coarse aggregate was less than $280\ell/\textrm{m}^3$ in this study.

• 한국조명전기설비학회지:조명전기설비
• /
• 제8권4호
• /
• pp.55-62
• /
• 1994

본 논문에서는 기존의 펌프나 가스를 이용한 강제유동식 시스템과는 달리 회전원통을 이용한 유동대전현상에 대하여 연구하여, 강제유동식에서의 대전특성과 비교, 분석하였다. 연구결과, 회전원통 시스템에서의 회전원통의 회전속도 및 온도에 따른 유동대전 특성은 강제유동식과 같은 경향을 보여 회전원통 시스템이 유동대전현상을 연구하는데 적합함을 알 수 있었다. 회전원통시스템은 강제유동식에 비하여 실험장치의 기계적 구조가 간단하고, 적은 양의 절연유만이 필요하며, 여러 가지 다른 물질로 실험하기가 비교적 편리하였다. 또한 대전 방지제의 첨가나 절연유의 열화에 따른 대전현상 등을 연속적으로 측정할 수 있는 특징이 있음을 알 수 있었다.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.79-88
• /
• 1999

Most difficulties of inducing high fluidity on the concrete mixing design with a strength range of 210 to 240kg/$\textrm{cm}^2$ result from the segregation of aggregates due to the shortage of cementitious binders. To solve the problem, this study concentrated on finding the optimized amount of binder material which does not affect the concrete strength and is also economical. Also there were studies on the use of intermediate sized aggregates to avoid the gap-grading between coarse and fine aggregates so that the material segregation in high flowing concrete was and minimalized the fluidity and penetration capacity of the reinforcing bars was enhanced. Throughout the parametric study with respect to water/binder ratio. superplasticizer. replaceable mineral admixture, the size of coarse aggregate and mixing methods, the effect of each constituent on the characteristics of high flowing concrete could be observed. As a result or partially using stone powder or an intermediate class of aggregate (max. diameter 13mm) . it was fund that the fluidity of concrete significantly increased without material segregation and any change of compressive strengths. It was also proved in this study that proper mixing time and speed are significant factors influence the performence of high flowing concrete.