• Current Research on Agriculture and Life Sciences
• /
• 제19권
• /
• pp.17-22
• /
• 2001

본 연구는 여왕별의 능력검정 및 선발기술을 확립하기 위하여 1999년 11월부터 2001년 10월까지 상주시 내서연 능암리 산 246번지에 있는 양봉장에서 서양종 봉군(Apis millifera)을 대상으로 실시되었는데, 그 결과를 요약하면 다음과 같다. 1999~2000 월동 기간 중 월동 전 후의 벌통무게는 $22.6{\pm}2.6kg$와 $20.1{\pm}2.6kg$로서 월동기간 중 벌통 무게 감소량은 $2.5{\pm}0.7kg$였다. 월동 2차 연도인 2000~2001 월동 기간 중 월동 전 벌통무게는 $22.6{\pm}2.3kg$이었으나 월동기간 중 벌통무게는 $2.3{\pm}0.6kg$이 감소되었다. 아까시꿀 채밀 직전에 조사된 착봉소비 매수는 2000년 5월 22일에 $13.1{\pm}4.6$매였으나, 2001년 5월 21일에는 $16.0{\pm}3.8$애였고, 계상이용율은 2000년에 50%이었으나 2001년에는 98.5%이었다. 아카시 유밀기에 있어서 2차에 걸쳐 채밀한 군당 평균 채밀량은 2000년에는 $12.7{\pm}8.6kg$이었으나 2001년에는 비선발군에서 $14.2{\pm}7.6kg$ 그리고 검정선발여왕벌 봉군에서 $23.5{\pm}4.9kg$이었다.

• 한국임상수의학회지
• /
• 제28권2호
• /
• pp.183-189
• /
• 2011

개 말초혈액 다형핵 백혈구(PMNs)의 탐식능력과 순간산소과소비력 (OBA) 에 대한 fucoidan의 효과를 검토하였다. Fucoidan 그 자체는 PMNs의 탐식능력과 OBA에 직접적인 효과를 보이지 않았다. 그러나 fucoidan으로 배양한 PBMCs의 배양상층액은 PMNs의 탐식능력과 OBA를 농도의존적으로 증가시켰다. 또한, TNF-${\alpha}$에 의한 PMNs의 탐식능력과 OBA의 측정 결과도 fucoidan으로 배양한 PBMCs 배양상층액의 그것과 유사하였다. 이러한 탐식능력과 OBA의 활성은 anti-TNF-${\alpha}$ pAb를 처리했을 때 억제되었다. PBMCs 배양 상층액 속의 TNF-${\alpha}$의 양을 정량한 결과 대조군에 비해 증가되었으며, PBMCs의 TNF-${\alpha}$ mRNA 발현 정도도 fucoidan을 첨가한 경우 증가되었다. 이상의 결과로부터, fucoidan은 개 말초혈액 PMNs의 탐식능력과 OBA에 대하여 면역자극 작용을 가지고 있으며, 이것은 fucoidan의 자극에 의해 PBMCs에서 생산되어 분비되는 가용성 물질인 TNF-${\alpha}$에 의해 나타나는 것으로 사료되었다.

• 동의생리병리학회지
• /
• 제17권2호
• /
• pp.394-402
• /
• 2003

This study was designed to investigate the protective effect of Bojungmyunyuk-dan(BJMY-Dan) on the cisplatin-induced cytotoxicity of primary rat astrocytes. BJMY-Dan is an oriental herbal prescription for its ability to recover protective effects against anti-cancer chemotherapies. After astrocytes were treated cisplatin, MTT assay was performed for cell viability test. To explore the mechanism of cytotoxicity, I used the several measures of apoptosis to determine whether this processes was involved in cisplatin-induced cell damage in astrocytes. Also, astrocytes were treated with BJMY-Dan and then, followed by the addition of cisplatin. Cisplatin decreased the viability of astrocytes in a dose and time-dependent manner. BJMY-Dan increased the viability of astrocytes treated cisplatin. Astrocytes treated cisplatin were revealed as apoptosis characterized by nuclear staining and flow cytometry. BJMY-Dan protected astrocytes from cisplatin-induced nuclear fragmentation and chromatin condensation. Also, caspase-3 and caspase-9 proteases were activated in astrocytes by cisplatin. BJMY-Dan inhibited the activation of caspase proteases in cisplatin-treated astrocytes. Cleavage of [poly(ADP-ribose) polymerase](PARP) was occurred at 12hr after treatment of cisplatin in astrocytes. BJMY-Dan recovered the cleavage of PARP in cisplatin-treated astrocytes. Also, BJMY-Dan inhibited the activation of pro-apoptotic factor, Bak by cisplatin. Lastly, astrocytes stained with JC-1 and Rhodamine 123 were photographed by fluorescence microscope to visualize changes of mitochondrial membrane permeability transition(MPT) during treatment with cisplatin for 24hr. BJMY-Dan recovered the change of MPT by cisplatin in astrocytes. According to above results, BJMY-Dan may protect astrocytes from cytotoxicity induced by chemotherapeutic agents, including cisplatin.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2009년도 학술논문요약집
• /
• pp.187-187
• /
• 2009

Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

• 동의생리병리학회지
• /
• 제22권1호
• /
• pp.32-50
• /
• 2008

This study is concerned with examining the causes and symptoms of Woman various diseases and clearing up the situations of pulses and their treatment. Woman various diseases are said to be various kinds of diseases including the disorder of menstruation and genitals except pregnancy and postpartum diseases. The main contents are the penetration of heat into worm, the discharge of much blood, stomachache, and the postpartum cyst diseases. Among them, the nature of the diseases which often occur in the gynecology, such as the menstrual diseases and stomachache, were described comparatively in detail. The reason why heat penetrates into the worm is that the external germs come into it under its weakness. To treat it, heat should be removed and lumping blood should be sent out of body. Especially only after whether the disease is serious or not is examined, and just after the process of the disease is examined, the lumping blood can be eliminated. The ways to cure it by sweating a patient too much, getting him or her to vomit, or forcing him or her to be urinated too much, should be avoided. The disorder of menstruation, as the disease which most often occur among the diseases of gynecology, includes menstrual irregularity and blood discharge, and non-menstruation. Among them, non-menstruation and blood discharge are comparatively often discussed. When they are treated, lumping blood and cold energy should be cured well through getting rid of the lumping blood and making the blood vessel flow well. The difficult urination after childbirth, which comes from the weak urinary cist, makes symptoms such as the stuffy chest, the difficulty of lying down, and breathing with his or her back something. To urinate better, the ability of the urinary cist should be supplemented and improved. The principle of the treatment for Woman various diseases is to examine the situation of the pulse closely, then set up the way to treat it, and prescribe a patient. In this study, besides the treatment of Chinese herb medicine, the medicine for washing genitals and the medicine placed in the worm were used to cure Woman various diseases. This treatment is the beginning of the surgical treatment in the gynecology.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.439-446
• /
• 2009

This study was performed to evaluate SND(simultaneous nitrification and denitrification)efficiency, nitrogen removal efficiency and filtration function of non-woven fabric by using submerging MBR packed with granular sulfur covered with non-woven fabric filter. Synthetic wastewater was used as influent wastewater. Concentration of $NH_4{^+}-N$ in influent was maintained about 40 mg/L and the experiment was performed in four phases according to the flow rate. Nitrogen loading rate divided four phases ranging from $0.04 kg\;NH_4{^+}-N/m^3-day$ to $0.16 kg\;NH_4{^+}-N/m^3-day$. As a result, the maximum $NH_4{^+}-N$ removal rate was accomplished at $0.142 kg\;NH_4{^+}-N/m^3-day$ in nitrogen loading of $0.147 kg\;NH_4{^+}-N/m^3-day$. Nitrification efficiency was higher than 95% in all phases. $NO_3{^-}-N$ loading rate was adjusted ranging from $0.22 kg\;NO_3{^-}-N/m^3-day$ to $0.89 kg\;NO_3{^-}-N/m^3-day$. The maximum $NO_3{^-}-N$ removal rate was accomplished up to $0.71 kg\;NO_3{^-}-N/m^3-day$ in $NO_3{^-}-N$ loading of $0.89 kg\;NO_3{^-}-N/m^3-day$. The maximum $NO_3{^-}-N$ removal efficiency was 95% in $NO_3{^-}-N$ loading of $0.22 kg\;NO_3{^-}-N/m^3-day$. T-N removal rate was 90% and concentration of T-N in effluent was 3.7 mg/L in T-N loading rate of $0.039 kg\;NO_3{^-}-N/m^3-day$. In this study, TMP in reactor with and without non-woven fabric filter were observed to define fouling of hollow-fiber membrane module. Reaching time to standard washing pressure(22 cm Hg) of two reactors were 29 days with non-woven fabric But the reactor without non-woven fabric reached standard washing pressure only after 4 days. Accordingly, non-woven fabric was demonstrated the superiority as a filtration ability. With high nitrogen removal rate and decreasing of fouling of membrane, MBR packed with granular sulfur covered with non-woven fabric filter submerging in activated sludge aeration tank can be used as an advanced treatment process.

• Journal of Pharmaceutical Investigation
• /
• 제40권2호
• /
• pp.117-123
• /
• 2010

Ibudilast, 3-isobutyryl-2-isopropyrazolo[1,5-a]pyridine, is a nonselective inhibitor of cyclic nucleotide phosphodiesterase (PDE). It preferentially inhibits PDE 3A, PDE4, PDE10 and PDE11 as well as a number of the other PDE families, albeit to a lesser extent. Ibudilast is used clinically to treat bronchial asthma and cerebrovascular disorders. Thes e clinical uses are based on the ability of ibudilast to inhibit platelet aggregation, improve cerebral blood flow and attenuate allergic reactions. The purpose of the present study was to evaluate the bioequivalence of two ibudilast capsules, Ketas capsule (Handok Pharmaceuticals Co., Ltd.) and Pinatos capsule (Sam Chun Dang Pharm. Co., Ltd.), according to the guidelines of the Korea Food and Drug Administration (KFDA). The in vitro release of ibudilast from the two ibudilast formulations was tested using KP Apparatus method with various dissolution media. Twenty six healthy male subjects, 23.31${\pm}$1.09 years in age and 70.45${\pm}$8.51 kg in body weight, were divided into two groups and a randomized $2{\times}2$ cross-over study was employed. After a single capsule containing 10 mg as ibudilast was orally administered, blood samples were taken at predetermined time intervals and the concentrations of ibudilast in serum were determined using HPLC/UV detector. The dissolution profiles of two formulations were similar in all tested dissolution media. The pharmacokinetic parameters such as $AUC_t$, $C_{max}$ and $T_{max}$ were calculated, and computer programs (Equiv Test and K-BE Test 2002) were utilized for the statistical analysis of the parameters using logarithmically transformed $AUC_t$, $C_{max}$ and untransformed $T_{max}$. The results showed that the differences between two formulations based on the reference drug, Ketas, were 6.99%, -2.48% and 9.93% for $AUC_t$, $C_{max}$ and $T_{max}$, respectively. There were no sequence effects between two formulations in these parameters. The 90% confidence intervals using logarithmically transformed data were within the acceptance range of log 0.8 to log 1.25 (e.g., log 0.8791~log 1.1861 and log 0.8347~log 1.1199 for $AUC_t$ and $C_{max}$, respectively). Thus, the criteria of the KFDA bioequivalence guideline were satisfied, indicating Pinatos capsule was bioequivalent to Ketas capsule.

• 자원환경지질
• /
• 제29권3호
• /
• pp.315-323
• /
• 1996

인회석 배수로가 1994년 9월 30일 미국 인디아나주 중서부에 위치한 Green Valley 폐탄광에 건설되었다. 현장설치의 일차적인 목적은 현장조건에서 산성수에 대한 인회석 배수로의 장기적인 처리능력을 평가하는 데 있다. 이 배수로는 실내실험결과에 따라 설계되었는데 연장 9m, 폭 3.3m, 심도 0.75m이며，95mm~30번 채 크기의 인회석광 (francolite)으로 채워져 있고 복구된 폐석더미로 부터 흘러나오는 산성수가 유입되게 되어 있다. 본 배수로는 폭우 및 실트의 퇴적으로 인한 손상을 막기 위해 석회석 자갈과 filter fabric으로 덮여져 있다. 본 배수로는 플로리다주의 인광석광산에서 채광된 50톤의 인회석으로 채워져 있다. 인회석은 산성수내의 첼 최대 4,200 mg/l, 알루미늄 최대 830 mg/l, 황산염 최대 13,430 mg/l를 제거하였다. 산도는 거의 일정하였으며 3.1에서 4.3까지 변화를 보였다. 배수로 하류에서 측정한 유출량은 3~4.5 l/m였다. 철 및 알루미늄 인산염 침전물은 노란색 및 흰색 부유성 입자인데 침전못에 계속적으로 퇴적되었다.

• 한국식품과학회지
• /
• 제22권6호
• /
• pp.711-715
• /
• 1990

식품 및 의약품 원료로 이용되고 있는 Iysozyme을 난백으로부터 이온교환 크로마토그래프를 이용하여 연속추출하였다. 사용된 수지는 지금까지 수율, 순도, 작동용이성에서 가장 효과적이라고 밝혀져 있는 Duolite C-464 양이온교환수지를 선택하여 $Na^+$형으로 $pH\;7.9{\pm}0.1$로 평형화하여 사용하였다. 조제용 자동 Liquid Chromatography(LC) system(column size ; i.d. 50 mm, bed volumn ; 1020 ml)에서 수지 평형화, 난백접촉, rinse, lysozyme용출 순으로 cycle을 연속적으로 반복하면서 시행하고 그 재현성을 관찰하기 위해 각 cycle별 rinse끝점과 용출끝점의 UV level을 비교하였다. 그 결과 rinse끝점은 19 cycle까지 30% 이하를 유지하였다. 용출 끝점은 17 cycle까지는 30% 이하에서 비교적 안정하였으나 18 cycle 이후 부터는 50% 이상으로 용출능력이 현저하게 감소하였다. 또한, 회수율 비교에서 17cycle까지는 90% 이상을 유지하다가 18cycle에서는 72%, 19 cycle에서는 65%로 격감하였다. 본 추출 정제 lysozyme은 전기영동상 단일 band로 나타났고, densitometer로 측정한 순도는 99% 이상이었다.

• Journal of Construction Engineering and Project Management
• /
• 제5권2호
• /
• pp.11-15
• /
• 2015

The Last PlannerSystem (LPS) has been implemented on construction projects to increase work flow reliability, a precondition for project performance againstproductivity and progress targets. The LPS encompasses four tiers of planning processes:master scheduling, phase scheduling, lookahead planning, and commitment / weeklywork planning. This research highlights deficiencies in the current implementation of LPS including poor lookahead planning which results in poor linkage between weeklywork plans and the master schedule. This poor linkage undetermines the ability of theweekly work planning process to select for execution tasks that are critical to projectsuccess. As a result, percent plan complete (PPC) becomes a weak indicator of project progress. The purpose of this research is to improve lookahead planning (the bridgebetween weekly work planning and master scheduling), improve PPC, and improve theselection of tasks that are critical to project success by increasing the link betweenShould, Can, Will, and Did (components of the LPS), thereby rendering PPC a betterindicator of project progress. The research employs the case study research method to describe deficiencies inthe current implementation of the LPS and suggest guidelines for a better application ofLPS in general and lookahead planning in particular. It then introduces an analyticalsimulation model to analyze the lookahead planning process. This is done by examining the impact on PPC of increasing two lookahead planning performance metrics: tasksanticipated (TA) and tasks made ready (TMR). Finally, the research investigates theimportance of the lookahead planning functions: identification and removal ofconstraints, task breakdown, and operations design.The research findings confirm the positive impact of improving lookaheadplanning (i.e., TA and TMR) on PPC. It also recognizes the need to perform lookaheadplanning differently for three types of work involving different levels of uncertainty:stable work, medium uncertainty work, and highly emergent work.The research confirms the LPS rules for practice and specifically the need to planin greater detail as time gets closer to performing the work. It highlights the role of LPSas a production system that incorporates deliberate planning (predetermined andoptimized) and situated planning (flexible and adaptive). Finally, the research presents recommendations for production planningimprovements in three areas: process related, (suggesting guidelines for practice),technical, (highlighting issues with current software programs and advocating theinclusion of collaborative planning capability), and organizational improvements(suggesting transitional steps when applying the LPS).