• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.1
• /
• pp.121-129
• /
• 2008

Major factors affecting water quality in rivers are transportation, input of pollutant loads and kinetic transformation of pollutants. Government level decision makings on water quality management are based on steady state water quality modeling. However, it is more than often that such a steady state assumption is far from real situations in rivers. Therefore, it is unavoidable to have modeling errors in water quality modeling especially for steady state modeling for longer period of time. Authors attempted to identify sources of errors in results of steady state models and thus tried to find out ways to minimize those errors. Three water quality models, QUAL2E (Brown et al., 1983), QUAL2K (Chapra et al., 2006) and CAP (Seo and Lee, 2000) were applied to the lower stream of the Geum River. $BOD_5$ and COD tend to underestimate observed data while TN and TP showed relatively smaller errors. QUAL2E model provided best calibration results for BOD5 and TP and QUAL2K model showed best calibration results for TN. Since these errors are only relative values, it was difficult to conclude which model is better performing in certain situations. The most probable reasons for errors in water quality modeling are; 1) inappropriate consideration on flow characteristics, 2) lack of information on incoming pollutant load and 3) inappropriate location of sampling for water quality analysis.

• Journal of Chest Surgery
• /
• v.35 no.8
• /
• pp.580-583
• /
• 2002

Background: Obtaining precise hemodynamic and morphological information in the early postoperative period after surgical correction of congenital heart disease is important in determining the need for future medical or surgical intervention. We investigated the residual shunting after surgical repair of simple ventricular septal defect in order to know the incidence of residual shunting in the postoperative period and the natural history of small residual shunts located in the peripatch area. Material and Method: Forty three consecutive patients under one year of age who underwent patch repair of a simple ventricular septal defect were evaluated for incidence of residual shunts by echocardiography. Result: Eleven patients had echocardiographic residual shunt in the peripatch area at immediate postoperative period, however, there were no patients who needed reoperation due to deteriorated hemodynamic effect of residual shunt. The incidence of residual shunts was not significantly different with type of ventricular septal defect and material used for closure. During follow up period, two patients were lost and remaining nine patients no longer showed evidence of residual shunt. The mean time of last evidence of shunt was $4.2{\pm}3.6$ months after operation. Conclusion: Residual peripatch shunt flow was frequently noted in the immediate postoperative period following surgical repair of ventricular septal defect, however, most of them were disappeared within six months.

• Journal of the Korean Vacuum Society
• /
• v.22 no.3
• /
• pp.168-173
• /
• 2013

In this paper, we would like to introduce Electron Relay Enhancer (ERE), a supplementary device, which improves commercial solar cell efficiency minimizing electron-hole recombination of solar cell. The ERE in this study is mainly composed of two capacitors which are connected to AC power source and bridge diode system which controls electron flow direction. Two capacitors repeat collecting electrons from solar cell and pumping the collected electrons to load resistance or inverter through the bridge diode system. While one positively charged capacitor collect electrons, the other negatively charged one pumps electrons. A positively charged capacitor pulls the more exited electrons from the solar cell, before the exited electrons recombine the holes in solar cell. That is why the ERE system enhances solar cell efficiency. As a result, the measured power increase of the solar cell with the ERE is varied from 5.9 W to 25.6 W in each experimental condition. Maximal increase rate of the solar cell power with ERE is 30.8% of solar cell power without ERE.

• Journal of Korea Water Resources Association
• /
• v.40 no.5
• /
• pp.419-430
• /
• 2007

Integrated modelling of surface water and groundwater has become important to satisfy the growing demands for sustainable water resources and improved water quality. In this study, the integrated model of the semi-distributed watershed model, SWA T and the fully-distributed groundwater flow model, MODFLOW is applied to Musirn river basin for the purpose of investigating its applicability to reproduce watershed-scale hydrological processes. This objective is accomplished by first demonstrating good agreement between the simulated discharge hydrographs with the measured hydrographs for the period of 2001 -2004 while simultaneously calibrating the calculated groundwater level distribution to observation wells. Next, the integrated model is used to evaluate the effect of different temporal precipitation averages on hydrodynamic processes of streamflow, percolation, recharge and groundwater discharge. Moreover, comprehensive simulations are performed to present the relationships between monthly precipitation and each hydrological component, and to analyze the temporal-spatial variability of recharge. The results show that the components are highly interrelated, and that the heterogeneity of watershed characteristics such as subbasin slope, land use, soil type causes a significant spatial variation of recharge. Overall it is concluded that the model is capable of reproducing the temporally and spatially varied surface and subsurface hydrological processes at the watershed scale.

• Journal of Korea Water Resources Association
• /
• v.42 no.4
• /
• pp.319-329
• /
• 2009

Sediment release openings or pipes are installed in the flood control dam constructed to reduce flood damages, which are to allow water and sediments pass through the dam and to prevent flow blockage and sedimentation in the upstream area of the dam. The Hantan River Flood Control Dam (HRFCD) has been projected for flood damage reduction and sediment release openings and ecological passages are considered for the dam design. In this study, sediment deposition due to the construction of HRFCD was analyzed using the HEC-6 model and compared with the state before the dam construction with respect to the conditions of the annual mean daily discharge and annual discharge hydrograph. According to the numerical results, although downstream water levels were changed by the dam structure, the effects of bed changes were not propagated from the dam over 2 km upstream. Also, 2D numerical models of RMA2 and SED2D were used to predict bed changes in the upstream area with and without sediment release openings. Consequently, it is presented that sediment release openings decreased maximum deposition height in the upstream channel of the dam.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.493-502
• /
• 2007

In this paper, we propose a handoff-aware DiffServ scheduler which intends to guarantee various QoS requirements of multimedia services for mobile nodes in TDD/CDMA based wireless networks. TDD is widely used duplexing mechanism in wireless communications. Unlike FDD, TDD allows a node to symmetrically communicate with a base station by using a single frequency band, resulting in high utilization of wireless resources. DiffServ is regarded as a relatively simple QoS support mechanism and thus it is easy to be extended. This is because DiffServ is not a per-flow based mechanisms and it does not require any signaling protocol. However, previously proposed DiffServ schedulers for wired networks can not be deployed directly into wireless networks since they do not consider properties of wireless networks. As a solution to the problem, DSS(DiffServ Supporting Scheduler) was proposed. DSS uses uplink channel, which is originally used for a node to require a base station to transmit packets, to support QoS efficiently. However, QoS does not consider handoff so that it can not support QoS for moving nodes from one cell to the other cell. Therefor. the proposed handoff support QoS mechanism is necessary for TCC/CDMA networks. The proposed scheme allows a mobile node to achieve seamless service without QoS degradation even for the handoff duration.

• Journal of Korean Public Health Nursing
• /
• v.5 no.2
• /
• pp.45-51
• /
• 1991

The purpose of this study is to investigate the stress and coping level as a result of dysmenorrhea which was experienced by girls. For the collection of data, the girls from the 1st to the 3rd grade in middle school in Seoul were selected through a random sampling technique. The survey was conducted from the 1st. to the 14th of June, 1991 by the use of questionnaires made after a pilot study. The final subjects for analysis were restricted to only those who had experienced me~arche, the number of which totaled 1,131. The stress, coping level, and other variables, were tested and analysed by descriptive statistics (eg, frequency, percentage, mean and standard deviation), t-test, ANOVA and Pearson's correlation coefficients. The obtained results are summarized as follows. 1. The chronological start for menarche was at a mean age of 13.1 The respondents who had experienced menarche numbered $70.9\%$ of the 1st grades and $96.2\%$ of the 2nd grades in middle school, otherwise the starting age for menarche was in the 4th grade in primary school. 2. Their menstrual cycle and period were longer than adult's one. The number of students studied who had experienced dysmenorrhea during their menstrual cycle were 860, and 650 of those revealed that their mothers or sisters had experienced similar problems. 3. The subjects who were late or head left early rather than being absent from school every menstruation cycle were more stressful. The results are thought to show that the girl's perception of dysmenorrhea seems to be more sensitive than adult's one. 4, A significant negative correlation was found between the perception of menstrual flow and strees level. It means that an increase in the stress of dysmenorrhea was associated with decreased menstrual bleeding. The degree of hypochondrical concern assessed by the girls was significantly correlated to stress and coping level. When the girls perceived high stress as a result of dysmenorrhea, they worried about their physical health more. The above results lead us to the suggestion that the starting point of early education with a school program is appropriate for the 4th grade in primary school. Especially if the girls in middle school should be required to give the information about correct knowledge and sufficient self -care management of menstruation monthly, if this could be implemented the loss in school days among the students due to dysmenorrhea would be minimized with more ease.

• Journal of KIISE
• /
• v.41 no.11
• /
• pp.892-899
• /
• 2014

Dynamic binary instrumentation is a code insertion technique for debugging a program without scattering its execution flow, while the program is running. Most dynamic instrumentations are implemented using dynamic binary translation techniques. Existing studies translated program codes dynamically by parsing the machine code stream to intermediate representation (IR) and then applying compilation techniques for IRs. However, they have high overhead during translation, which is a major cause of difficulty in applying the dynamic binary translation technique to the program which requires high responsiveness. In this paper, we introduce a light-weight dynamic binary instrumentation framework based on a novel dynamic binary translation technique which has low overhead while translating the program code. In order to reduce the translation overhead, our approach adopts a tabular-based address translation and exploits a translation bypassing scheme, which stores the translated address of a frequently called library function in advance. It then accesses the translated address and executes function codes without code translation when calling the function. Our experiment results demonstrated that the proposed approach outperforms the prior dynamic binary translation techniques from 2% up to 65%.

• The KIPS Transactions:PartD
• /
• v.13D no.1 s.104
• /
• pp.67-74
• /
• 2006

The security requirements identification in the software development has received some attention recently. However, previous methods do not provide clear method and process of security requirements identification. We propose a process that software developers can build application specific security requirements from state transition diagrams at the security threat location. The proposed process consists of building model and identifying application specific security requirements. The state transition diagram is constructed through subprocesses i) the identification of security threat locations using security failure data based on the point that attackers exploit software vulnerabilities and attack system assets, ii) the construction of a state transition diagram which is usable to protect, mitigate, and remove vulnerabilities of security threat locations. The identification Process of application specific security requirements consist of i) the analysis of the functional requirements of the software, which are decomposed into a DFD(Data Flow Diagram; the identification of the security threat location; and the appliance of the corresponding state transition diagram into the security threat locations, ii) the construction of the application specific state transition diagram, iii) the construction of security requirements based on the rule of the identification of security requirements. The proposed method is helpful to identify the security requirements easily at an early phase of software development.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.5
• /
• pp.209-218
• /
• 2015

BPEL is used in various domains since it can describe the flow of works according to conditions and rules, and it can call web services in service-oriented computing environments. However, new functions that are not provided by BPEL grammar are required in specific domains. Generally, when new functions are required, the domain-specific language should be newly defined and developed, which requires high development cost. In this regard, a new function needs to be defined and added instead of developing domain-specific language with the new functions added. However, such methods only allow an addition of a single function, and it is difficult to design and add new functions according to the needs. This paper defines XAS4B document, which extends the BPEL grammar function through XML schema in order to add new functions, and proposes BPEL engine generator that generates BPEL engine with the new functions added by processing the document. The XAS4B document enables the creation of a new grammar added to BPEL using XML schema. It also shows the process of adding new functions to BPEL engine using AspectJ, JAVA implementation of aspect-oriented programming. The proposed system can add new functions using AspectJ without modifying BPEL engine. This allows the provision of new functions at low cost in various domains.