• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.365-368
• /
• 2002

The design of industrial arc plasma systems is still largely based on trial and error although the situation is rapidly improving because of the available computational power at a cost which is still fast coming down. The desire to predict the behavior of arc plasma system, thus reducing the development cost, has been the motivation of arc research. To interrupt fault current, the most enormous duty of a circuit breaker, is achieved by separating two contacts in a interruption medium, $SF_{6}$ gas or air etc., and arc plasma is inevitably established between the contacts. The arc must be controlled and interrupted at an appropriate current zero. In order to analyze arc behavior in $SF_{6}$ gas circuit breakers, a numerical calculation method combined with flow field and electromagnetic field has been developed. The method has been applied to model arc generated in the Aachen nozzle and compared the results with the experimental results. Next, we have simulated the unsteady flow characteristics to be induced by arcing of AC cycle, and conformed that the method can predict arc behavior in account of thermal transport to $SF_{6}$ gas around the arc, such as increase of arc voltage near current zero and dependency of arc radius on arc current to maintain constant arc current density.

• Food Science and Preservation
• /
• v.8 no.1
• /
• pp.102-108
• /
• 2001

Flow properties of the concentrated pigment solutions extracted from purple-fleshed sweet potatoes were determined using a cone and plate rotational viscometer for soluble solids concentration range of 25 to 65% at temperature range of 20 to 60 $^{\circ}C$. The purple-fleshed sweet potato pigment solutions exhibited Newtonian behavior. Temperature dependency for the viscosity of the solution followed the Arhenius relationship with activation energy values between 14.23 and 43.00 kJ/mol, which increased linearly with soluble solids concentration. A relationship between viscosity, temperature and soluble solids concentration was investigated. At the same temperature, the viscosity of the concentrated pigment solutions increased exponentially as the concentration increased with higher degree of such phenomena at lower temperatures.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.210-217
• /
• 2011

Recently, research on evaluating thermal comfort by using CFD has been vigorously active. This research evaluates not only distribution of temperature and air flow analysing but also thermal comfort in indoor space by applying human model. But research of human model's shape, Grid characteristic and turbulence model has not yet been studied. In this paper, human model's shape, physical characteristic of variable Grid, and change of turbulence model has been studies by CFD. In this study. FLUENT is used for analysis and PMV(predicted Mean Vote), PPD(Predicted Percentage Dissatisfied) and EHT(Equivalent Homogeneous Temperature} are used for evaluation and comparison of thermal comfort. As a result, it shows that shape of CSP and lattice features does not affect on global flow field or evaluation on PMV, PPD. However, it demonstrates more precise result from evaluation of thermal comfort by equivalent temperature when it used detailed human model considering prism grid.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.4
• /
• pp.1385-1394
• /
• 1996

A theoretical analysis was performed on the heat transfer by laminar oscillating flow in a simplified heat exchanger of a Stirling cycle machine and the results were compared with the experiment of Hwang. In the analysis the general solution to the temperature field obtained by Lee et. al was applied and extended to a more realistic situation. The results show that the heat transfer is influenced by the ratio of the swept distance of the fluid to the length of the heat exchanger as well as the oscillation frequency. This is well consistent with the result of Hwang's experiment. It is also revealed that there exist three distinct regimes having different heat transfer mechanisms. Through the scale analysis the main parameters governing the heat transfer in each regime are reduced and the dependency of the heat transfer on the parameters are examined.

• The Korean Journal of Community Living Science
• /
• v.28 no.2
• /
• pp.191-201
• /
• 2017

This study compared and analyzed the structures of cooking recipes in order to identify the overall cooking method and develop an efficient method for analyzing cooking recipes. We present procedural texts using a flow graph, which can be referred to as a recipe tree, to represent cooking recipes and the database. A total of 110 kimchi jjigae recipes were identified and classified as 'portion', 'kinds of ingredients', and 'number of cooking deployment'. Recipes for two persons were the most common (43.6%), and 7-13 kinds of ingredients accounted for 50% of kimchi jjigae recipes. Kimchi presented the highest frequency at 78 cases, and pork showed the high frequency at 30 cases. To identify cooking deployment, step 6 was the highest, followed by step 5 (17.3%), step 7 (17.3%), step 4 (11.8%), and step 3 (9.1%). When analyzing the frequency of the relationship between ingredients and action in a recipe expression, Food (F) and Action by the chef (Ac) showed the highest rates at 11.29 and 12.30, respectively, in the cooking process. For frequencies of dependency relation expression in recipes, d-obj (direct object) was the highest at 13.56. The proposed method provides users more efficient and easier access to recipes suitable for their cooking skills.

• Tribology and Lubricants
• /
• v.27 no.1
• /
• pp.7-12
• /
• 2011

Interest in advanced machining process such as AJM(abrasive jet machining) and CMP(chemical-mechanical polishing) using micro/nano-sized abrasives has been on the increasing demand due to wide use of super alloys, composites, semiconductor and ceramics, which are difficult to or cannot be processed by traditional machining methods. In this paper, the effects of pressure, wafer moving velocity and fluid viscosity were investigated by 2-dimensional finite element analysis method considering slurry fluid flow. From the investigation, it could be found that the simulation results quite corresponded well to the Preston's equation that describes pressure/velocity dependency on material removal. The result also revealed that the stress and corresponding material removal induced by the collision of particle may decrease under relatively high wafer moving speed due to the slurry flow resistance. In addition, the increase in slurry fluid viscosity causes the reduction of material removal rate. It should be noted that the viscosity effect can vary with the shape of abrasive particle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.125-132
• /
• 2002

An experimental study on the characteristics of stability of propane turbulent nonpremixed jet flames discharged normal to air free-streams with uniform velocity profile is conducted. Experimental observations are focused on the flame shape, the stability considering two kinds of flame, lift-off distance, and the flame length according to velocity ratio. In order to investigate the mixing structure of the flame base at the lower limit, we employ the RMS technique and measure the species concentration by a gas chromatography. In the results of the stability curve and lifted flame, it is fecund that the dependency of nozzle diameter is closely related to the large-scale vortical structure representing counter-rotating vortices pair. Also, the detailed discussion on the phenomenon of blowout due to this large vortical motion, is provided.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.4
• /
• pp.169-178
• /
• 2016

Recently, artificial reefs (ARs) have been frequently used primarily owing to the development in AR materials and projects for relatively complicated, large ARs. Among several engineering issues of ARs, wake region of an AR has been characterized because these regions have a high probability of recruiting seaweed spores, providing an energy saving zone, and facilitating deposition of sediments, nutrients, and bio-deposits. To characterize an efficiency index of an AR wake region and its dependency on the prevailing water flow directions, this study proposes a so-called efficiency index diagram. This characterization is done by normalizing the wake volumes with respect to the real AR volume and illustrating how efficiency indices vary with respect to the inlet flow directions. As a result, according to the diagram characteristics such as an averaged efficiency index, fundamental symmetric angle, secure angles, and principal directions, we can easily figure out how a target AR should be aligned along the main water flows to maximize the wake region around the AR. In addition, six ARs are considered and their efficiency index diagrams are illustrated to pinpoint the physical characteristics.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.87-98
• /
• 2008

In company with the demand of powerful processing units for embedded systems, the method to develop embedded software is also required to support the demand in new approach. In order to improve the resource utilization and system performance, software modeling techniques have to consider the features of hardware architecture. This paper proposes a partitioning technique of UML-based software models, which focus the generation of the allocatable software components into multiprocessor architecture. Our partitioning technique, at first, transforms UML models to CBCFGs(Constraint-Based Control Flow Graphs), and then slices the CBCFGs with consideration of parallelism and data dependency. We believe that our proposition gives practical applicability in the areas of platform specific modeling and performance estimation in model-driven embedded software development.

• Journal of Korea Multimedia Society
• /
• v.24 no.1
• /
• pp.40-50
• /
• 2021

Science museum are dealing with exhibits on field of changing science and technology, and previous research suggested that exhibits replacement should carried out at least every 5 years. In order to efficiently replace exhibits within a limited budget, various studies analyzed visitors' preferences to exhibits. Recently, studies use various technologies to collect the data on visitors' preferences automatically, but almost of studies had a high dependency on their visitors such as visitors needed to carry specific sub-devices in the museums for gathering data. As complementing the limitations of previous research, this study introduces the improved method which is able to automatically collect and quantify visitors' preferences to exhibits using TensorFlow, a deep learning technology. By the proposed analysis method, it was possible to collect 2,520 data of visitors' experience on exhibits in totality. Based on collected data, attraction power and holding power indicating the preference of visitors on exhibits were able to be calculated. The result also confirmed antecedent research conclusion that the attraction power and holding power of the exhibit which consists of 3 dimensional structures work are higher than other exhibits. As a conclusion, the proposed method will provide more convenient data collection method for detecting visitors' preference.