• 한국전산유체공학회:학술대회논문집
• /
• 2001.10a
• /
• pp.99-105
• /
• 2001

Flow computations have been conducted to study the impingement flowfield over the KSR-III flume deflector To validate Euler solver for the jet impingement flowfieid, the jet flow over a double wedge deflector have been calculated and showed reasonable agreement with experimental data. The transient flow behavior of flume over deflector have been investigated and the flume from the rocket nozzle proved to be getting out of the deflector safely and the thermal effect on the base region of rocket was not considerable.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.159-163
• /
• 2020

In this study, the flow analyses around according to the existence or non- existence of the trailer's deflector and the shapes were carried out. In the absence of a deflector, the kinetic energy of the turbulence behind the container also generates higher kinetic energy in a wider area than in the presence of a deflector, which adversely affects the vehicle's driving performance. As a trailer's wind deflector-free model has unstable flow rates around the trailer and high kinetic energy of turbulence than a model with a deflector, it can be thought that the increase of fuel economy can be expected by installing a deflector in the trailer. By applying the study result on flow analysis near trailer due to shape of wind deflector, this study is seen to be suitable for the aesthetic convergence.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.182-189
• /
• 2009

The noise from the sunroof can be divided into the low frequency buffeting noise and the high frequency turbulence noise generated when a car runs at the high driving speed. The wind deflector suppresses the buffeting noise generation by accelerating the vortex shedding from the front edge of sunroof opening, and guides the flow direction so that air can pass smoothly over the sunroof opening. To reduce the buffeting noise and the high frequency noise, it is very important to locate a deflector in a proper position depending on the driving speed and the sunroof opening width. The deflector's sectional shape also plays an important role in efficiently reducing the buffeting and high frequency noise. In this paper, we determined the optimum deflector's sectional shape and examined the flow characteristics behind a sunroof deflector through CFD analysis with changing the deflector height, the driving speed and the sunroof opening width. It is found that the deflector needs to be located in the higher location to control the buffeting noise by shedding the higher frequency vortices to accelerating vortices from the sunroof front edge. The deflector may act as a new noise source at the high driving speed, then it is desirable to put the deflector at the proper height to reduce the flow fluctuations and the noise generation. We also made a road test to verify CFD analysis results in this study.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.494-498
• /
• 2001

When supersonic jet impinges on wall from the nozzle, complex flow pattern appears such as Mach disc, expansion fan, and jet boundary. The numerical computation of this supersonic jet is important on flame deflecctor design for launch space especially. In this paper, we analyzed supersonic jet structure impinging on deflector wall using three dimensional steady and unsteady compressible equation and showed temperature and pressure distribution on the wall surface. As a result, some dominant factors of jet flows are discussed for conceptual design of flame deflector.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.1
• /
• pp.13-19
• /
• 2016

The flow-excited Helmholtz resonance phenomenon was investigated numerically using Reynolds averaged Navier-Stokes approach. The fundamental cause of the Helmholtz resonance phenomenon is known as shedding of a single discrete vortex from orifice edge that travels during one period of the oscillation. In this study, serrated deflector, which is biomimetic design of the owl's feather, is used to split a single vortex into small vortices. Rectangular deflector and serrated deflector are compared with numerical results of pressure and streamline inside the cavity. Consequently, the serration breaks the shedding period of vortex core and eliminates the resonance. Also, it changes the flow pattern in according to the location of different serration height. By making inflows and outflows occur simultaneously in spanwise direction in the cavity, the period of Helmholtz resonance disappears. Comparing between rectangular deflector and serrated deflector, the serrated deflector can deal with the Helmholtz resonance more effectively.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.2
• /
• pp.138-144
• /
• 2014

This study investigates the air resistance due to deflector configurations of commonly used largetrucksat a driving speedof 80 km/h. Of the 6 models that are considered, the drag causedby the pressure on the front part of the trailer is largest for model 1. For model 1, the lift caused by the difference between the velocities of the upper and lower streams isgreatest amongall the models. Model 6 has the least resistance against the flow stream consideringthedrags and lifts of theflow models. Anoptimal design can be obtainedby investigating thesimulation analysis ofvarious deflector configurationsfor the upper part of largetrucks; this optimum deflector configuration will help reduce the air resistanceon large trucks.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.285-291
• /
• 2018

In the present study, flow characteristics and wind noises around the sunroof opening are analyzed variation with panoramic sunroof deflector angle. A mesh deflector is attached to reduce wind noise while a car is driving with the panoramic sunroof opening. A new forward inclined type deflector was invented to improve wind noise. The effect of this new concept of mesh deflector on the open-panoramic flow characteristics and wind noises were studied with CAT (Computer Aided Test) and wind tunnel test, which shows the reduction of open-panoramic wind noises such as sunroof buffeting, sunroof booming, and turbulent noise. Therefore, the forward inclined type deflector can efficiently improve wind noise with the same production cost.

• Journal of Aerospace System Engineering
• /
• v.15 no.6
• /
• pp.10-18
• /
• 2021

A flame deflector prevents a launch system from thermal damage by deflecting the exhaust flame of the launch vehicle. During the deflection of the flame, the flame deflector is subjected to a high-temperature and high-pressure flow, which results in thermal ablation damage at the surface. Predicting this ablation damage is an essential requirement to ensure a reliable design. This paper introduces a numerical method for predicting the ablation damage phenomena based on a one-way fluid-structure interaction (FSI) analysis. In the proposed procedure, the temperature and convective heat transfer coefficient of the exhaust flame are calculated using a fluid dynamics analysis, and then the ablation is calculated using a finite element analysis (FEA) based on the user-subroutine UMESHMOTION and Arbitrary Lagrangian-Eulerian (ALE) adaptive mesh technique in ABAQUS. The result of such an analysis was verified by comparison to the ablation test result for a flame deflector.

• Journal of the Korean Society of Visualization
• /
• v.19 no.3
• /
• pp.46-53
• /
• 2021

In the present study, wind tunnel experiments were performed to reduce the drag of a paragliding helmet in the range of Reynolds numbers from 46,000 to 155,000. The drag force of the helmet model with dimples and deflectors installed was measured by varying the dimple depth and the slant angle of the deflector. The dimples were effective in reducing the drag at low Reynolds numbers, but no significant drag reduction was found in the Reynolds number range in which an actual paraglider flight takes place. On the other hand, the deflector installed tangentially to the side outline of the helmet showed an average drag reduction of 7% in the flight Reynolds number range of real paragliding. This was because the deflector shrunk the size of the wake region and moved the wake region downstream of the deflector.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.313-316
• /
• 2011

This paper investigates CFD investigation on single phase supersonic nozzle flow and 2-phase subson ic flow prior to rocket nozzle supersonic 2-phase flow with water injection within the flame deflector. Numerical results of supersonic nozzle single phase flow showed no notable unrealistic behavior as it captures the usual shock cell structures. Three-dimensional 2-phase flow analysis has also been performed to verify whether the approach can grab the droplet behavior during cooling by water injection. It is expected these basic studies will enhance the cooling problem analysis of supersonic 2-phase rocket plume in the future.