• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.105-110
• /
• 2002

Experimental study was conducted to reveal the instability such as leakage flow and rotating stall in an axial flow fan. For this study, unsteady total pressure probe and multi-hole pressure probe were specially designed for measuring the flow field upstream and downstream of rotor. The measured pressure signal was analyzed by Single and Double Phase Locked Averaging Technique. From the result of total pressure fields at inlet and outlet of the rotor, the useful information on the structure of the stall cell in radial direction was provided. Also, detailed flow measurements were carried out with a specially designed high frequency multi-hole pressure probe, providing some insight to the leakage flow and their interation.

• 센서학회지
• /
• 제23권6호
• /
• pp.388-391
• /
• 2014

The most promising application of the biofuel cells is implantable devices, so the biofuel cells should have an appropriate shape for the vascular vessel. We demonstrated the biofuel cell roll for using in tubes. MWNTs were aggregated by vacuum filtration on a nitrocellulose membrane filter, which was biocompatible and flexible. The MWNT aggregated nitrocellulose membrane used the electrodes of the biofuel cells because it was conductive as well as nanostuructured. Then, the membrane was rolled into the roll shape. The maximum power density of the biofuel cell roll was $7.9{\mu}W/cm^2$ at 153mV and 50 mM glucose. Also, the power density is expected to increase in its practical application if there is flow in the tube, which makes the transportation of fuel easy. The biofuel cell roll contacts with the wall of the tube, so flow in the tube does not disturb. Also, the biofuel cell roll has multi-layers offering more electroactive area.

• Natural Product Sciences
• /
• 제22권4호
• /
• pp.293-298
• /
• 2016

Plant-derived triterpenoids commonly possesses biological properties such as anti-inflammatory, antimicrobial, anti-viral and anti-cancer. Luvunga scandens is one of the plant that produced triterpenoids. The aims of the study was to analyze cell cycle profile and to determine the expression of p53 unregulated modulator of apoptosis (PUMA), caspase-8 and caspase-9 genes at mRNA level in MCF-7 cell line treated with two triterpenoids, flindissol (1) and 3-oxotirucalla-7,24-dien-21-oic-acid (2) isolated from L. scandens. The compounds were tested for cell cycle analysis using flow cytometer and mRNA expression level using quantitative RT-PCR. The number of MCF-7 cells population which distributed in Sub G1 phase after treated with compound 1 and 2 were 7.7 and 9.3% respectively. The evaluation of the expression of genes showed that both compounds exhibited high level of expression of PUMA, caspase-8 and caspase-9 as normalized to ${\beta}-actin$ via activation of those genes. In summary, the isolated compounds of L. scandens plant showed promising anticancer properties in MCF-7 cell lines.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권21호
• /
• pp.9159-9164
• /
• 2014

Background: In this study eugenol (EU) loaded nanoemulsions (NEs) emulsified with modified starch were prepared and their apoptotic potential against liver and colon cancer cells was examined in comparison with bulk EU. Materials and Methods: We prepared stable EU loaded NEs whcih were characterized by dynamic light scattering, centrifugation and gas chromatography. Furthermore, cell viability was determined using MTT assay, and apoptosis and cell cycle analysess by flow cytometry. Results: HB8065 (liver) and HTB37 (colon) cells when treated with EU:CA NEs demonstrated greater apoptotic cells percentages as evidenced by microscopic images and flow cytometric evaluations. It was observed that EU and EU:CA NE induced apoptosis in both cell lines via reactive oxygen species (ROS) generation. Conclusions: The present study demonstrated that ROS plays a critical role in EU and EU:CA NE induced apoptosis in HB8065 and HTB37 cells. This is the first report on the antiproliferative mechanisms of EU loaded NE.

• 한국수소및신에너지학회논문집
• /
• 제19권3호
• /
• pp.232-238
• /
• 2008

Research has been proceeded on fuel cell which is fueled by hydrogen. Polymer electrolyte membrane fuel cell (PEMFC) is promising power source due to high power density, simple construction and operation at low temperature. But it has problems such as high cost, temperature dependent performance. These problems could be solved by experiment which is useful for analysis and optimization of fuel cell performance and heat management. In this paper, when hydrogen flows constantly at the stoichiometry of ${\xi}=1.6$, the performance of the fuel cell stack was increased and the voltage difference between each cells was decreased according to the increase of air stoichiometry by 2.0, 2.5, 3.0. Therefore, the control of air flow rate in the same gas channel is important to get higher performance. Purpose of this research is to expect operation temperature, flow rate, performance and mass transportation through experiment and to help actual manufacture of PEM fuel cell stack.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.124-132
• /
• 2007

The main objective of this work is to investigate the characteristics of a heat pump system for fuel cell electric vehicle (FCEV). The present heat pump system adopts an electrically driven compressor running with R134a and uses the heat from the fuel cell stack as the heat source for the exterior heat exchanger. The experimental work has been done with various operating conditions such as different compressor speeds, fuel cell stack coolant temperatures and flow rates. The heating capacity was measured to be from 4 to 10 kW at $-20^{\circ}C$ ambient temperature, and the outlet temperature of interior heat exchanger was up to $70^{\circ}C$. After 30 seconds from start-up, the system reached a steady state and the heating capacity of 6.8 kW was acquired, and after 90 seconds, the air outlet temperature of interior heat exchanger became $35^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1329-1334
• /
• 2007

The electrochemical oxidation of cerium(III) was carried out using divided and undivided electrochemical cells in nitric acid medium. It was found that divided cell with Nafion 324 as the separator gave good conversion yield with high current efficiency compared to the undivided cell. The efficiency of the divided electrochemical cell was further optimized in terms of cell voltage, temperature, flow rate of solution recirculation, concentrations of Ce(III) and nitric acid. The better conditions for 1 M Ce(III) in 3 M nitric acid were found to be 2.5 V, 363 K and 100 mL/min recirculation flow rate based on the current efficiency under the experimental conditions investigated. The Ce(IV) oxidant produced was used as a mediator for the mineralization of phenol. The mineralization efficiency of the cerium mediated electrochemical oxidation was found rapid and higher compared to the direct electrochemical oxidation based on CO2 evolution under the same conditions.

• Biomolecules & Therapeutics
• /
• 제22권6호
• /
• pp.553-557
• /
• 2014

Verapamil is used in the treatment of hypertension, angina pectoris, and atrial fibrillation. Recently, several studies have demonstrated that verapamil increased the optic nerve head blood flow and improved the retrobulbar circulation. All these show that verapamil is potentially useful for ophthalmic treatment. Thus, the aim of this study is to investigate whether verapamil could protect human lens epithelial cell (HLEC) from oxidative stress induced by $H_2O_2$ and the cellular mechanism underlying this protective function. The viability of HLEC was determined by the MTT assay and apoptotic cell death was analyzed by Hoechst 33258 staining. Moreover, Caspase-3 expression was detected by immunocytochemistry and flow cytometry analysis. We also detected Caspase-3 mRNA expression by reverse-transcription-polymerase chain reaction and the GSH content in cell culture. The results showed that oxidative stress produced significant cell apoptotic death and it was reduced by previous treatment with the verapamil. Verapamil was effective in reducing HLEC death mainly through reducing the expression level of apoptosis-related proteins, caspase-3, and increasing glutathione content. Therefore, it was suggested that verapamil was effective in reducing HLEC apoptosis induced by $H_2O_2$.

• 멤브레인
• /
• 제22권5호
• /
• pp.332-341
• /
• 2012

실리카 콜로이드 용액의 정유량 한외여과에서 중력 방향에 대한 막모듈의 위치(경사각) 변화에 따라 발생되는 자연대류 불안정 흐름의 막오염 저감효과를 차압의 변화 정도를 측정하여 규명하였다. 막표면에 케이크 층을 형성함으로서 막오염을 발생시키는 나노 사이즈의 실리카 입자(평균 크기 = 7, 12, 22, 50 nm 및 78 nm)가 함유된 5가지 종류의 콜로이드 용액을 사용하여 중력 방향에 대한 막모듈의 위치(경사각 = $0^{\circ}{\sim}180^{\circ}$)에 따른 차압의 변화를 교반이 없는 dead-end 정유량 한외여과 실험을 통해 측정하였다. 상대적으로 크기가 작은 실리카 입자(7, 12 nm 및 22 nm)가 함유된 콜로이드 용액의 정유량 한외여과에서 막모듈 경사각을 $30^{\circ}$ 이상으로 유지하면 막모듈에 자연대류 불안정 흐름이 발생되어 막오염 형성을 크게 억제시켜 차압의 증가가 거의 나타나지 않았다. 이 자연대류 불안정 흐름의 발생은 막표면에 형성된 실리카 케이크층의 벌크용액으로의 역이동(back transport)을 유발시킴으로서 차압의 증가를 억제시키는 막성능 개선 효과를 나타내었다. 그러나 상대적으로 크기가 큰 실리카 입자(50 및 78 nm)가 함유된 콜로이드 용액의 정유량 한외여과에서는 자연대류 불안정 흐름 발생의 효과가 거의 없었다. 임계 플럭스 측정 결과 실리카 입자의 크기가 작을수록 그리고 막모듈 경사각이 클수록 막모듈에의 자연대류 불안정 흐름의 발생 강도가 커져 막오염 형성이 억제되었으며, 이로 인해 임계 플럭스가 증가하였다.

• 대한기계학회논문집B
• /
• 제29권8호
• /
• pp.911-920
• /
• 2005

The present study investigates heat/mass transfer and flow characteristics in a ribbed rotating passage with turning region. The duct has an aspect ratio (W/H) of 0.5 and a hydraulic diameter ($D_h$) of 26.67 mm. Rib turbulators are attached in the parallel arrangement on the leading and trailing surfaces of the passage. The ribs have a rectangular cross section of 2 m (e) $\times$ 3 m (w) and an attack angle of $70^{\circ}$. The pitch-to-rib height ratio (p/e) is 7.5, and the rib height-to-hydraulic diameter ratio (e/$D_h$) is 0.075. The rotation number ranges from 0.0 to 0.20 while the Reynolds number is constant at 10,000. To verify the heat/mass transfer augmentation, internal flow structures are calculated for the same conditions using a commercial code FLUENT 6.1. The results show that a pair of vortex cells are generated due to the symmetric geometry of the rib arrangement, and heat/mass transfer is augmented up to $Sh/Sh_0=2.9$ averagely, which is higher than that of the cross-ribbed case presented in the previous study for the stationary case. With the passage rotation, the main flow in the first-pass deflects toward the trailing surface and the heat transfer is enhanced on the trailing surface. In the second-pass, the flow enlarges the vortex cell close to the leading surface, and the small vortex cell on the trailing surface side contracts to disappear as the passage rotates faster. At the highest rotation number ($R_O=0.20$), the turn-induced single vortex cell becomes identical regardless of the rib configuration so that similar local heat/mass transfer distributions are observed in the fuming region for the cross- and parallel-ribbed case.