• Proceedings of the KSAR Conference
• /
• 2002.06a
• /
• pp.37-37
• /
• 2002

The success of embryo cloning depends on numerous factors; interaction between recipient ooplasm and donor nucleus, nuclear reprogramming, oocyte activation, and donor cell cycle and type. In this study, the cell cycle and apoptosis of bovine fetal fibroblast as a donor cell for embryo cloning were evaluated following different activation treatments. (omitted)

• Journal of Acupuncture Research
• /
• v.19 no.4
• /
• pp.74-88
• /
• 2002

Objectives : This study is aimed to investigate the effects of bee venom and melittin on cell death in synovial cell line. Methods : It was evaluated by using MTT assay, morphologic method, DNA fragmenation, NO generation, flow cytometry, immunocytochemistry analysis, RT-PCR, Western blot. Results : The obtained results are summarized as follows: 1. The MTT assay demonstrated that synovial cell viability was significantly inhibitted dose-dependently by treatment with bee venom and melittin in comparison with control. 2. The morphologic study demonstrated that synovial cell showed apoptosis after treatment with bee venom and melittin for 6 hours using microscope. 3. In case of NO generation bee venom group and melittin group showed significant inhibition in comparison with control. 4. The Flow cytometry demonstrated that apoptosis of synovial cell treated with bee venom and melittin was related with stop of cell cycle in stage of $G_0/G_1$. 5. DNA fragmenation demonstrated that synovial cell treated with bee venom and melittin showed DNA ladder below l Kbp. 6. Immunocytochemistry assay demonstrated that COX-II and PLA2 were strongly down-regulated by treatment with bee venom and melittin whereas iNOS was almostly not expressed by bee venom treatment and slightly expressed by melittin treatment. 7. RT-PCR analysis demonstrated that iNOS were strongly down-regulated by treatment with bee venom and melittin whereas COX-II was almostly not expressed by bee venom treatment and slightly expressed by melittin treatment. 8. Western blot demonstrated that iNOS were strongly down-regulated by treatment with $15{\mu}g/ml$ bee venom whereas COX-II was strongly down-regulated from $5{\mu}g/ml$ bee venom. Conclusions : These results suggest that bee venom and melittin have significant effect on cell death in synovial cell line and further study is needed in vivo.

• Journal of Acupuncture Research
• /
• v.19 no.2
• /
• pp.28-38
• /
• 2002

Objective : This study is aimed to investigate the effects of bee venom and purified bee venom on cell death in synovial cell line. Methods : It was evaluated by using MTT assay, morphological method, flow cytometry, immunocytochemistry analysis, RT-PCR. Results : The result obtained is as follows. 1. The MTT assay demonstrated that synovial cell viability was significantly inhibitted dose-dependently by treatment with BV and PBV in comparison with control. And the inhibitory effect of BV and PBV was almost same. 2. The morphologic study demonstrated that synovial cell showed apoptotic body resulted from apoptosis after treatment with BV and PBV for 6 hours using microscope. 3. The Flow cytometry demonstrated that apoptosis of synovial cell treated with BV and PBV was related with stop of cell cycle in stage of G0/G1. 4. Immunocytochemistry assay demonstrated that COX-II and iNOS were slightly expressed by treatment with BV and PBV in comparison with control group. 5. RT-PCR analysis demonstrated that COX-II were almost down-regulated by high dose treatment with BV and PBV in comparison with control group. iNOS were well down-regulated by treatment with $5{\mu}g/ml$ BV and PBV whereas it was well expressed in control group. Conclusion : These results suggest that bee venom and purified bee venom have significant effect on cell death in synovial cell line and further study is needed in vivo.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.19 no.2
• /
• pp.214-225
• /
• 2006

Purpose : This study was aimed to investigate the inhibitory effect of Corydalis Tuber on the proliferation of human uterine leiomyoma cell and the expression of gene related the mechanism of cell apoptosis. Methods : We counted the number of suvival cells treated with indicated concentration of Corydalis Tuber and investigated cell viability by MTS assay. Furthermore, flow cytometric analyis were used to dissect between necrosis and apoptosis related with cell cycle and then we observed the differential gene expression by western blot analysis. Results : 1) The inhibitory effect on the proliferation of uterine leiomyoma cell treated with Corydalis Tuber was increased in a concentration and time proportional. 2) The result of flow cytometry analysis, subG1 phase arrest related cell apoptosis was not investigated in uterine leiomyoma cell treated Corydalis Tuber but showed G2/M phase prolongation. 3) The gene expression of p27, p21 related cell cycle was increased according to increasing concentration, but p53 was not exchanged. 4) The dephosphorylation of pRb gene were increased dependent on treatment concentration and pro-caspase 3, CDK4 were not exchanged. Conclusion : This study showed that Corydalis Tuber have the inhibitory effect on the proliferation of human uterine leiomyoma cell but the effect was thoughted no relationship with apoptosis. The inhibitory effect was suggested that dephosphorylation of pRb gene induced with increasing p21, p27 prolonged cell division in G2/M phase.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.1
• /
• pp.75-84
• /
• 2000

Performance and flow characteristics of a small forward swept propeller fan for home refrigerators are studied experimentally. An unusual discontinuity is observed in the performance curve of the fan. Mean flow fields measured with as-hole Pitot probe reveal that the flow is axial at the high flow rate and radial at the low flow rate. The flow structure changes abruptly across the discontinuity. Unsteady flow measurements with a set of hot-wire probes indicate that near the discontinuity a single-cell stall rotates at 40% speed of the fan speed, while away from the discontinuity the flow shows periodic variation corresponding to the blade passage frequency. Phase-lock averaged flow fields measured with a triple-sensor hot-wire probe show that there appears radially inward flow over the pressure side of the blade and the outward passage flow over the tip.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.113-130
• /
• 2002

In this paper, we developed DNL(Dynamic Network Loading) model based on Moving cell theory to analyze the dynamic characteristics of traffic flow in congested network. In this paper vehicles entered into link at same interval would construct one cell, and the cells moved according to Cell following rule. In the past researches relating to DNL model a continuous single link is separated into two sections such as running section and queuing section to describe physical queue so that various dynamic states generated in real link are only simplified by running and queuing state. However, the approach has some difficulties in simulating various dynamic flow characteristics. To overcome these problems, we present Moving cell theory which is developed by combining Car following theory and Lagrangian method mainly using for the analysis of air pollutants dispersion. In Moving cell theory platoons are represented by cells and each cell is processed by Cell following theory. This type of simulation model is firstly presented by Cremer et al(1999). However they did not develop merging and diverging model because their model was applied to basic freeway section. Moreover they set the number of vehicles which can be included in one cell in one interval so this formulation cant apply to signalized intersection in urban network. To solve these difficulties we develop new approach using Moving cell theory and simulate traffic flow dynamics continuously by movement and state transition of the cells. The developed model are played on simple network including merging and diverging section and it shows improved abilities to describe flow dynamics comparing past DNL models.

• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.147-151
• /
• 2014

A boron doping process using a boron tri-bromide ($BBr_3$) as a boron source was applied to form a $p^+$ emitter layer on an n-type mono-crystalline CZ substrate. Nitrogen ($N_2$) gas as an additive of the diffusion process was varied in order to study the variations in sheet resistance and the uniformity of doped layer. The flow rate of $N_2$ gas flow was changed in the range 3 slm~10 slm. The sheet resistance uniformity however was found to be variable with the variation of the $N_2$ flow rate. The optimal flow rate for $N_2$ gas was found to be 4 slm, resulting in a sheet resistance value of $50{\Omega}/sq$ and having a uniformity of less than 10%. The process temperature was also varied in order to study its influence on the sheet resistance and minority carrier lifetimes. A higher lifetime value of $1727.72{\mu}s$ was achieved for the emitter having $51.74{\Omega}/sq$ sheet resistances. The thickness of the boron rich layer (BRL) was found to increase with the increase in the process temperature and a decrease in the sheet resistance was observed with the increase in the process temperature. Furthermore, a passivated emitter solar cell (PESC) type solar cell structure comprised of a boron doped emitter and phosphorus doped back surface field (BSF) having Ni/Cu contacts yielding 15.32% efficiency is fabricated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1570-1579
• /
• 2000

Finite element analysis of fluid flow with moving free surface has been carried out in two and tree dimensions. The new VOF-based numerical algorithm that has been proposed by the present authors was applied to several 2-D and 3-D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools that have been newly introduced by the present authots; the orientation vector to represent the free surface orientation in each cell and the baby-cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2-D and 3-D cavity filling and sloshing problems, which demonstrated versatility and effectiveness of the new free surface tracking scheme as well as the overall solution procedure. The proposed numerical algorithm resolved successfully the interacting free surface with each other. The simulated results demonstrated the applicability of proposed numerical algorithm to the practical problems of large free surface motion. Also, it has been demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non-uniform grid systems and can be extended to the 3-D free surface flow problem without additional efforts.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.615-621
• /
• 2013

Membrane characterization methods for aqueous redox flow batteries aqueous RFBs were modified for non-aqueous RFBs. The modified characterization methods, such as ion exchange capacity, transport number, permeability and single cell test, were carried out to evaluate commercial membranes in non-aqueous electrolyte. It was found that columbic efficiency and energy efficiency in a single cell test were dependent on the ion selectivity of commercial anion exchange membranes. Neosepta AHA anion exchange membrane showed the anion transport number of 0.81, which is a relatively low ion selectivity in non-aqueous electrolyte, however, exhibited 92% of coulombic efficiency and 86% of energy efficiency in a single cell test. It was also found that a porous membrane without ion selectivity is suitable for a non-aqueous redox flow battery at a high current density.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.472-476
• /
• 2019

We have proposed a novel planar lightwave circuit (PLC) optical sensor to monitor the contamination in a flow-cell where water is continuously supplied through a water quality measurement system. We designed a PLC chip with a V-shape waveguide and the simulated its function as a sensor for monitoring contamination in a flow-cell using a numerical the FDTD (finite-difference time-domain) analysis. A novel cross type of waveguide was introduced to make the PLC chip of the V-shaped waveguide. The fabricated PLC was cut into the cross waveguide. A change in the optical propagation loss of the PLC sensor was observed after immersing the PLC sensor into city water. It was determined that the propagation loss of the PLC sensor was 3 dB at a wavelength of $1.55{\mu}m$ in the city water for 15 days.