• 한국산림과학회지
• /
• 제83권4호
• /
• pp.473-479
• /
• 1994

본 연구는 임지의 수저류능력을 토양공극 구분에 의한 실제 이용가능수량으로 평가하여 지속적인 수자원의 확보를 위한 기초자료를 제공할 목적으로 수행하였으며, 그 결과는 다음과 같다. 1. 조공극은 임지>임간나지>초지의 순으로 높았고, 토심이 깊을수록 전공극, 조공극, 이용가능수량은 감소하는 반면, 세공극은 점차 증가하는 것으로 나타났다. 2. 토양의 공극과 이학적 특성은 지피상태별로 표층(0~20cm)에서 고도의 유의차를 보이는 반면, 토심 20~40cm와 토심 40~60cm에서는 큰 차이가 없었다. 한편, 동일 시험구에서 표층(0~20cm)과 토심 20~40cm와는 큰 차이를 보이나 토심 20~40cm와 토심 40~60cm와는 큰 차이가 없었다. 3. 전 시험구에서 이용가능수량은 조공극과 고도의 상관관계를 나타냈다. 4. 조공극량과 토심을 이용하여 나타낸 이용가능수량으로 각 지피상태별 수저류량 추정모델을 산출할 수 있었다.

• KIEAE Journal
• /
• 제17권1호
• /
• pp.23-28
• /
• 2017

Purpose: Many design index that are using in planning phase have been developed. The most popular things among them are Window to Wall Ratio and Surface to Volume Ratio. However there are some limits. Window to Wall Ratio cannot consider building size and Surface to Volume Ratio cannot do Window to Wall Ratio. Accordingly, in this paper, the Window to Floor Ratio was proposed that it can be considered both building size and Window to Wall Ratio. And analyzed correlation of energy demand. Method: For the test, 16 modules with the size of $6m{\times}6m{\times}4m$ were used to make 35 models with the same volume. The simulation was conducted to 945 cases using the window-to-wall ratio of 30, 50 and 70 % in three areas such as Seoul, Gwangju and Jeju and three kinds of windows. And IES_VE was used. Result: The findings above show that the Window to Floor Ratio that can be considered both building size and Window area have to become as design index. It was found out that design criteria with SHGC is necessary, not with the thermal performance (U-value). It is needed to additional analysis about residential building and the effect of 24-hours heating and cooling condition. It plans to carry out research to establish design indicators for climatic conditions in the country and building applications.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.125-131
• /
• 2014

The purpose of this study is to investigate the effect of high quality CPR using the 4 types of rescue device equipment and chest compressions energy measurement in pre-hospital settings. So, we used the mode to insert load cell in ALS Skill master Manikin to develop CFMM(Compression Force Measurement Manikin) on main stretcher, CPR board, long spine board, scoop stretcher and floor. And, our research team could know that the main stretcher needed average force of 32.55 (${\pm}1.01$) kg, CPR board of 27.23 (${\pm}1.08$) kg, long spine board of 27.13 (${\pm}1.18$) kg, Scoop Stretcher of 27.38 (${\pm}1.05$) kg and Floor of 27.24 (${\pm}0.93$) kg. CPR board must be necessary in the case of CPR on main stretcher in a moving ambulance. But if the condition of patient's back surface is the removable stretcher and the long spine plate, the patient doesn't have to be spent time to use a CPR board. Furthermore, this research suggests to consider that how to take advantage of the education to students for the equipment to check in real time the energy(kg) requirement of chest compressions.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.128-133
• /
• 2011

In this study, the steel material for shipbuilding(LR-A class) was used, and FCAW was taken advantage of 3G attitude and they are welded by different welding ways. As a result of analyzing wave with welding monitoring system, the stable values are obtained which are the first floor(electronic current 164~182 A, voltage 24 V), the second floor(electronic current 174~190 A, voltage 22~25 V), the third floor(electronic current 158~188 A, voltage 22~25 V), and fourth floor(electronic current 172~184 A, voltage 22~25 V), at this time, the stable wave standard deviation and changing coefficient could be obtained. When the welding testing through nondestructive inspection was analyzed know defect of welding, there was no defect of welding in A, D, E, but some porosities in B, and slag conclusion near the surface in C, because the length of arc was not accurate, and the electronic current and voltage was not stable. After observing the change of heat affect zone through micro testing, each organization of floor formed as Grain Refinement, so welding part was fine, the distance of heat affect zone is getting wider up to change the values of the electronic current and voltage. As a result of degree of hardness testing, the hardness orders were the heat affect zone(HAZ), Welding Zone(WZ), and Base Metal(BM). When the distribution of degree of hardness is observed. B is the highest degree of hardness The reason why heat effect zone is higher than welding zone and base metal, welding zone is boiled over melting point($1539^{\circ}C$) and it starts to melt after the result of analysis through metal microscope, so we can know that delicate tissue is created at the welding zone. Therefore, in order to get the optimal conditions of the welding, the proper current of the welding and voltage is needed. Furthermore the precise work of welding is required.

• 제어로봇시스템학회논문지
• /
• 제15권2호
• /
• pp.218-224
• /
• 2009

This paper proposes an effective SLAM based on redundant extended Kalman filter for robot navigation in an irregular surface to enhance the accuracy of robot's pose. To establish an accurate model of a caterpillar type robot is very difficult due to the mechanical complexity of the system which results in highly nonlinear behavior. In addition, for robot navigation on an irregular surface, its control suffers from the uncertain pose of the robot heading closely related to the condition of the floor. We show how this problem can be overcome by the proposed approach based on redundant extended Kalman filter through some computer simulation results.

• 한국전문물리치료학회지
• /
• 제13권3호
• /
• pp.102-110
• /
• 2006

To improve trunk stability, various exercise protocols were introduced into the clinical field. Trunk and lumbar stability exercises on unstable surfaces are especially recommended to improve lumbar stability. The purpose of this study was to compare abdominal oblique muscle activity during leg raising in hook-lying position among 3 different type of surface conditions (on floor (F), vestibular board (VB), and foam roll (FR)). Sixteen able-bodied volunteers, who had no medical history of lower extremity or lumbar spine disease, were recruited for this study. Surface electromyography (EMG) activity was recorded from the internal and external oblique muscles of both sides. The normalized EMG activity was compared using a one-way repeated ANOVA. The results showed that the EMG activities of the internal oblique and external oblique of the lifted leg side during straight leg raising significantly increased under the FR condition when compared to the F condition. There was no significant difference of the EMG activity in abdominal oblique muscles between the VB and the FR conditions. The EMG activity of the internal oblique of supported leg side during the straight leg raising was significantly greater under the FR condition than the VB and F conditions (p<.05). The composition ratio of EMG activity of internal oblique muscles during straight leg raising was significantly increased under the FR condition. Therefore, straight leg raising exercise on foam roll in hook lying position could be beneficial to improve trunk and lumbar stability.

• 한국기계가공학회지
• /
• 제5권4호
• /
• pp.59-64
• /
• 2006

High Speed Machining(HSM) reduces machining time and improves surface accuracy because of the high cutting speed and feedrate. Development of HSM makes it allowable to machine difficult-to-cut material and use small-size-endmill. It is however limited to cutting condition and tool material. In the machining operation, it is important to check main parameter of tool life and select optimal cutting condition because tool breakage can interrupt progression of operation. In this study, cutting parameters are determined to 3 factors and 3 levels which are a spindle speed, a feedrate and a width of cut. Experiment is designed to orthogonal array table for L9 with 3 outer array using Taguchi method. Also, it is proposed to inspect significance of the optimal factors and levels by ANOVA using average of SN ratio for tool life. Finally, estimated value of SN ratio in the optimal cutting condition is compared with measured one in the floor shop and reduction of loss is predicted.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권2호
• /
• pp.192-199
• /
• 2002

In continuous galvanizing process, the mass of zinc deposited and its distribution are controlled by the air pressure, effective distance from the air knife nozzle to the steel strip surface and line speed. Coating defects are resulted from the unbalance of these control factors and the inaccuracy of coating equipments. This paper investigates the main cause of coating deviation and a new air knife system for control of coating thickness was developed. We investigate dynamic pressure variation by air knife types. It is found that the coating deviation is caused by the unbalance of dynamic pressure, the irregularity of strip position, and the strip vibration. Formulating a useful coating model by using present working condition, an optimal working condition is suggested. The productivity and coating quality are improved by applying the result of this research at the shop floor.

• 융합정보논문지
• /
• 제9권6호
• /
• pp.7-12
• /
• 2019

수중촬영을 위해서는 촬영자가 장비를 갖추고 수중으로 진입하여 촬영해야 한다. 촬영자가 직접 수중에 진입하기 때문에 수중에 존재하는 다양한 장애물이나 깊은 수심으로 인해 안전사고가 빈번하게 발생하고 있다. 이러한 문제점을 해결하기 위해 본 논문에서는 수중 입체촬영을 위한 수면호버링 드론에 대해 제안하였다. 레이저 센서를 이용한 수위측정을 통해 드론이 일정 높이의 수면에서 호버링한 상태에서 촬영부만 수중으로 이동시켜 수중상태를 입체로 촬영하는 최적의 기법에 대해 기술하였다. 제안한 수중 입체촬영기법은 수중촬영에 드론을 사용함으로써 촬영자가 직접 수중으로 진입하지 않아도 되기 때문에 안전사고에 대한 문제점을 해결할 수 있으며 저비용으로 수중입체영상을 획득할 수 있는 장점을 갖고 있다. 입체촬영용으로 제안한 캠의 촬영각을 분석하여 적정한 입체영상의 시청이 가능한 조건을 수중 18cm높이에서 바닥면 거리가 41.4cm 일 때로 규정하고 수면호버링 드론의 엘리베이션 체인에 의해 하강하는 촬영부의 높이를 조정하도록 제안하였다.

• 한국주거학회논문집
• /
• 제18권1호
• /
• pp.61-72
• /
• 2007

The purposes of this study were to summarize the concept of well-being and well-being apartment, to grasp the present condition of apartments which were introduced with well-being elements, and to find out the consumer preferences on well-being elements for apartment planning. Library and internet surveys were performed to summarize the concept of well-being and well-being apartment and to grasp the present condition of apartments which were introduced with well-being elements. Questionnaire survey was carried out from 2nd to 22nd of June 2005, to investigate the preferences on well-being elements for apartment planning. The respondents were 250 residents who are from thirties to fifties and living in urban area. As results, respondents think that 'living for health of body and mind' about concept of well-being and 'certificated apartments by green building rating system' or 'apartments introduced ecological factor' about concept of well-being apartment. They answered that 'yes' about 'Do you have intention to buy well-being apartment?'. The elements in aspect of complex planning having the preference were revealed that promenade for complex design, ecological garden or walking space for landscape design, outdoor exercise space for outdoor design, and security system for foundation equipment. The elements having the preference in aspect of public facilities were fitness room for sports & health facility and study room for cultural facility. The preferred elements in aspect of building and unit design were roof garden for building design, multi-functional room for unit floor plan, natural surface material for interior surface, ventilation system for indoor environment, control system for home automation, and food waste machine for home electronics.