• Journal of Fashion Business
• /
• v.25 no.4
• /
• pp.151-160
• /
• 2021

The purpose of this study was to investigate whether there were improvements on balance when both ankle-jointed calf muscles and hip muscles, which affect balance capabilities, were activated through taping techniques and EMS. In this study, the One Leg Standing Test, a static balance test, was conducted by experimenting on a flat floor, foam pad, and a stretching board with a gradient of 20 degrees, respectively, to study static balance capabilities in different situations. Nine healthy men in their 20s were measured five times every five minutes considering muscle fatigue, and the difference between each variable was analyzed through post-test using nonparametric statistical analysis. Our results showed an equal increase in static balance capability was similar when EMS was applied only to calf muscles and only to hip muscles. Notably most improvements were seen when wearing calf supporters and taping technology pants, and applying EMS together. It was also found that the difference between EMS electric stimulation and balance capability was greater when wearing and applying supporters and taping technology pants. Based on the results of the present study, a muscle support band and EMS of taping techniques can improve balance capabilities. These findings are expected to form a basis for solutions Improving the balance capabilities

• PNF and Movement
• /
• v.16 no.3
• /
• pp.345-353
• /
• 2018

Purpose: The purpose of the present study was to compare the effects of proprioceptive neuromuscular facilitation (PNF) and static stretching on weight distribution and flexibility for trunk flexion. Method: Sixty participants who had no musculoskeletal disorders were recruited from a local university within six months of this study. The participants were randomly assigned to a PNF stretching group (N=30) and a static stretching group (N=32). For the pre-and post-measurement design, the left-right weight distribution, anterior-posterior weight distribution, and finger-to-floor distance (FFD) were measured before and after the stretching interventions. Result: The FFD results were significantly improved after the interventions, regardless of the group differentiation (p<0.05). The PNF stretching intervention significantly increased the differences between anterior and posterior weight distribution compared to the static stretching group (p<0.05). Conclusions: Both the PNF and static stretching interventions could improve flexibility for trunk flexion mobility. Although the PNF intervention improved the weight distribution in the anterior-posterior direction, further research is required to investigate the various PNF interventions on left-and-right and anterior-posterior weight distribution.

• Journal of Trauma and Injury
• /
• v.32 no.2
• /
• pp.115-117
• /
• 2019

Although hemothorax and pneumothorax are common complications seen in rib fractures, focal extrapleural hematoma is quite rare. We report a 63-year-old female patient that developed large focal extrapleural hematoma after falling off a second floor veranda. The patient had sustained 3, 4, 5th costal cartilage rib fractures and a sternum fracture. She had developed suspected empyema with loculations with small amount of hemothorax. She underwent a planned early decortication/adhesiolysis by video assisted thoracoscopic surgery at the 12th post-trauma day due to failed drainage. Unexpectedly, she had no adhesions or any significant retained hematoma mimicking a mass, but was found with the focal extrapleural chest wall hematoma. She was discharged on postoperative 46th day for other reasons and is doing fine today.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.29 no.4
• /
• pp.21-28
• /
• 2023

Purpose: This study is to analyze the preferences for future senior housing that reflects the characteristics of the new generation of seniors and to consider the direction of future senior housing. Methods: Data from an online survey of a new generation of older adults and group interviews with professionals and baby boomers were analyzed. The data collected from the survey and interview have been using quantitative analysed method. Literature surveys also have been carried out. Results: The results show that future senior housing requires a change in perception through conceptual expansion from the Aging in Place (AIP) to the Aging in Community (AIC) paradigm. The preferences of the new generation of seniors for future senior housing were examined to determine their preferences for location, facility size and type, unit floor plans and services, and living costs. Implications: The direction of senior housing services and architectual plans for seniors aged 55 to 65 years old were discussed.

• Journal of Korean Physical Therapy Science
• /
• v.16 no.3
• /
• pp.19-27
• /
• 2009

Background: To study the effect of the home exercise program on pain, flexibility, endurance of extensor in chronic back pain patients, and suggest optimal method for home exercise program. Methods: I divided into two groups who has chronic back pain; one is control group who was given a treatment at the hospital only and the other is experimental group who did another exercise after treatment at the hospital, and there were 10 people in each group. The manual therapy were given to all the patients in each group after applying a stupe and an electric treatment, but the experimental group conducted another exercise program at homes. All the exercise programs were applied to patients 12 times for 4 weeks totally. Result: SPSS for win version 12 was used for statistic analysis and independent t-test was used to find changes between two groups. VAS scale was used to show changes in pain between each group. The grade of pain was decreased between pre&post test to -5.60 in control group and -4.80 in experimental group but there wasn't significant difference between each group. Finger tip-to-floor test was used for the flexibility changes and it was increased between pre&post test in both groups but the change of flexibility between each groups didn't show statistical difference. Biering-Sorensen test was used to measure the endurance of extensor and it was increased between pre&post test in both groups but there wasn't significant difference between each group. Conclusion: As you read the results above, for a chronic low back pain patient, application of the manual therapy showed that it has effect on decrease of low back pain, increase of flexibility and endurance of extensor. However, the effect of home exercise treatment was not sure about improvements for chronic low back pain patient. So I think there should need further study about the effect of home exercise treatment except the treatments at hospital and the thorough education for the exercise of lumbar should be done before the study for the accurate experiment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.157-167
• /
• 2016

Detached residential housing areas are located in the west part of Pangyo City. Seven areas of them are designated for the displaced residents from their original homes by the city development, in which commercial use on the first floor is permitted. The District Plan for the areas were establishes, and one of its main goals is to secure privately owned public spaces (POPS). This research conducted a post enumeration survey on the POPS on the blocks in the seven areas, which blocks contain inner corridors between two rows of housing units. Analytical review of the survey result reveals that (1) POPS facing roads are mainly being used as parking lots or expansion-spaces for the commercial use on the first floor, (2) inner POPS forming corridors are being neglected and otherwise being used as storage areas or outdoor sub-kitchen spaces, and (3) no consideration has been taken for the continuity of the sloped corridors. Regardless of a few good practices in terms of air circulation and lighting, the POPS in the blocks prove to be limited in following the plan's original design intentions and principles.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.1
• /
• pp.91-103
• /
• 2015

Purpose: The purpose of this study was to investigate the effects of home exercise program and exercise program of round shoulder adjustments on the level of trapezius muscle activity and attention capacity for middle school students. Method: The participants in this study were composed of 21 middle school students. We made the students lie on the floor in prone position, then measured the height of their acromion from the floor. We chose participants for our study whose measurement values were over 2.5cm. We divided them into two groups, one is for the experimental group, and the other is for the control group. The experimental group exercised three days a week for 6 weeks, including home training, and the control group didn't exercise. We used EMG to measure the trapezius muscle's activity and used a Stroop test for the measurement of the students' attention capacity. Results: The results of our study are as follows. There was no significant difference between the experimental group and the control group. However, there was a significant difference within the experimental group when comparing pre and post training results for Trapezius muscle activity and attention capacity. Conclusion: We found that correcting round shoulder symptom increases the Trapezius muscle activity and students' attention capacity. Future experiments should investigate with systemical management. Also, we need to increase the frequency of the exercise and participants.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.335-342
• /
• 2007

C-shaped canals are known to present a complex canal anatomy with numerous fins connecting individual canals, thus requiring supplementary effort to accomplish a successful root canal treatment. This study examined the frequency of the C-shaped mandibular second molars and interrelation between the clinical records and radiographs to recognize them treated in the Department of Conservative Dentistry of the Chosun University Dental Hospital during a six-year period (1998-2004). This study reviewed the clinical records of 227 patients who underwent root canal treatment of the mandibular second molars. After opening the chamber, those cases with C-shaped orifices in the pulpal floor were selected, ana the C-shaped root canal types were classified according to Melton's criteria. Three experienced dentists evaluated the radiographs of the C-shaped mandibular second molar on a viewer using a magnifying glass in order to determine if the root apex was fused or separated, the distal root canal was either centered or mesial shifted in the distal root, and if there was bilateral symmetry in a panorama. In conclusion, there is a high frequency of C-shaped mandibular second molars in Koreans. Simultaneous interpretation of the root shape and distal root canal using the preoperative, working length and post-treatment radiographs is important for diagnosing a C-shaped mandibular second molar.

• The Journal of Society for e-Business Studies
• /
• v.27 no.2
• /
• pp.205-218
• /
• 2022

Recently, digital transformation in manufacturing has been accelerating. It results in that the data collection technologies from the shop-floor is becoming important. These approaches focus primarily on obtaining specific manufacturing data using various sensors and communication technologies. In order to expand the channel of field data collection, this study proposes a method to automatically collect manufacturing data based on vision-based artificial intelligence. This is to analyze real-time image information with the object detection and tracking technologies and to obtain manufacturing data. The research team collects object motion information for each frame by applying YOLO (You Only Look Once) and DeepSORT as object detection and tracking algorithms. Thereafter, the motion information is converted into two pieces of manufacturing data (production performance and time) through post-processing. A dynamically moving factory model is created to obtain training data for deep learning. In addition, operating scenarios are proposed to reproduce the shop-floor situation in the real world. The operating scenario assumes a flow-shop consisting of six facilities. As a result of collecting manufacturing data according to the operating scenarios, the accuracy was 96.3%.

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.347-358
• /
• 2009

Recently, it is getting into a good situation for the flat-plate slab system to be applied. The flat-plate slab without beam, however, is often too weak to control deflection properly compared to other typical slab-beam structures, for which the post-tension method is generally regarded as one of best solutions. The post-tension (PT) method can effectively control deflection without increase of slab thickness. Despite this good advantage, however, the application of PT method has been very limited due to cost increase, technical problems, and lack of experiences. Therefore, in order to reduce difficulties on applying full PT method under the current domestic circumstances and to enhance constructability of PT system, this research proposed the partial PT method with top jacking anchorage applied in a part of span as need. For the top jacking anchorage system, the efficiency of deflection control shall be considered in detail because it can vary widely depending on the location of anchorage that can be placed anywhere as need, and tensile stresses induced at back of the anchorage zone also shall be examined. Therefore, in this study, analysis were performed on the efficiency of deflection control depending on the location of anchorage and on tensile stresses or forces using finite element method and strut and tie model in the proposed top jacking anchorage system. The proposed jacking system were also applied to the floor slabs at a construction site to investigate its applicability and the analysis results of slab behavior were compared to the measured values obtained from the PT slab constructed by the partial PT method. The result of this study indicates that the partial PT method can be very efficiently applied with little cost increase to control deflection and tensile stresses in the region as a need basis where problem exists.