• 한국해안해양공학회지
• /
• 제3권4호
• /
• pp.235-243
• /
• 1991

본 논문에서는 연직 2차원 파랑의 회절 및 방사문제를 효율적으로 해석할 수 있는 무한요소 개발에 대해서 연구하였다. 물체 주변의 내부영역은 통상의 유한요소로 모형화 하였으며, 외부영역은 본 연구에서 제시한 무한요소로 모형화하였다. 이 무한요소의 형상함수는 외부영역의 산란파의 거동을 고유함수의 급수해로 표시하였을 때 나타나는 진행파 항과 첫번째 산란파 항을 사용하여 결정하였으며, 수치해석 상의 효율을 증가시키기 위하여 무한요소의 요소행열 구성시 나타나게 되는 무한방향으로의 적분을 해석적으로 수행하였다. 본 무한요소의 효율성을 입증하기 위하여, 단면이 직사각형인 경우와 반원형인 부체를 대상으로 예제 해석을 수행하였다. 또한, 해석의 효율성 및 해의 정확도에 직접적으로 영향을 미치는 무한요소 위치의 기준 설정을 위한 수치실험도 수행하였다.

• 한국산림과학회지
• /
• 제74권1호
• /
• pp.29-36
• /
• 1986

이태리포푸라 I-214 (Populus euramericana cv. I-214)의 기내배양(器內培養)한 엽육조직(葉肉組織)에서 원형질체(原形質體) 분리(分離)에 미치는 몇가지 요인(要因)에 대(對)해 조사(調査), 검토(檢討)하였다. 기내(器內)에서 배양(培養)된 아(芽)를 다량(多量)으로 증식(增植)하기 위한 배지(培地)는 MS 기본배지(基本培地)에 $0.1mg/{\ell}$의 BAP를 첨가(添加)한 것이 가상 좋은 성적을 나타냈다. 엽(葉) 1g 당(當) $2.4{\times}10^6$개의 가장 높은 원형질체(原形質體) 분리(分離) 빈도를 나타낸 것은 Cellulase R-10 2 %, Macerozyme R-10 0.8 %, Hemicellulase 1.2 %, Driselase 2.0 %, Pectolyase Y-23 0.05 %에 DTT와 MES 완충액을 첨가(添加)한 후 삼투압 안정제로 0.6 M의 Mannitol을 넣고 pH를 5.6으로 조정한 효소용액(酵素溶液)이었다. CPW 용액(溶液)으로 세정(洗淨)한 후 0.6 M의 Sucrose 용액(溶液)에 처리(處理)한 것이 회수율(回收率) 51.8 %로 가장 높게 나타났다.

• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.543-551
• /
• 2011

본 논문에서는 해양작업 상태의 하중조건을 고려한 부유식 원유생산 저장 하역장치에 설치된 라이져 보강구조의 강도설계에 관련하여 다양한 근사화 기법 기반 설계최적화 및 그 성능을 비교하고자 한다. 설계최적화 문제는 하중조건별 구조강도의 제한조건 하에서 중량을 최소화하여 설계변수인 구조 부재치수가 결정되도록 정식화된다. 비교 연구를 위해 사용된 근사화 기법은 반응표면법 기반 순차적 근사최적화(RBSAO), 크리깅 기반 순차적 근사최적화(KBSAO), 그리고 개선된 이동최소자승법(MLSM) 기반 근사최적화 기법인 CF-MLSM와 Post-MLSM이다. RBSAO와 KBSAO의 적용을 위하여 상용프로세스 통합 설계최적화(PIDO) 코드를 사용하였다. 본 연구에 적용한 MLSM 기반 근사최적화 기법들은 제한조건의 가용성을 보장할 수 있도록 새롭게 개발되었다. 다양한 근사화 모델 기반 설계최적화 기법에 의한 결과는 설계 해의 개선 및 수렴속도 등의 수치적 성능을 기준으로 실제 비근사 설계최적화 결과와 비교 검토하였다.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.104-117
• /
• 1991

자유표면을 가지는 유체에서 물체가 운동을 하게되면 물체와 자유표면의 교차점 주위에서 유제유동이 매우 급격해진다. 이 유동현상은 부유체의 운동에 따르는 유체유동, 탱크내에서의 슬로싱, 조파기 문제, 물체의 입수등 여러문제에서 발생된다. 이 유동은 교차점 주위에서 특이성을 가진다고 알려져 있었으나 Roberts(1987)는 물체의 운동이 충격운동이 아닐 경우에는 특이성이 존재하지 않는다는 것을 밝혔다. 본 논문에서는 표면장력을 고려하여 물체의 운동이 충격운동인 경우에도 특이성을 가지지 않는 해석해를 구하였고, 해의 특성을 조사하여 진동현상에 대한 임계치를 구하여 교차점에서 떨어진 거리가 이 임계치보다 작은 곳에서는 진동현상이 존재하지 않는다는 것을 밝혔다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3080-3085
• /
• 2007

Shape optimization of the 3-dimensional WIG airfoil with 3.0-aspect ratio has been performed by using the multi-objective genetic algorithm. The WIG ship effectively floating above the surface by the ram effect and the virtual additional aspect ratio by a ground is one of next-generation and cost-effective transportations. Unlike the airplane flying out of the ground effect, a WIG ship has possibility to capsize because of unsatisfying the static stability. The WIG ship should satisfy aerodynamic properties as well as a static stability. They tend to strong contradict and it is difficult to satisfy aerodynamic properties and static stability simultaneously. It is inevitable that lift force has to scarify to obtain a static stability. Multi-objective optimization technique that the individual objectives are considered separately instead of weighting can overcome the conflict. Due to handling individual objectives, the optimum cannot be unique but a set of nondominated potential solutions: pareto optimum. There are three objectives; lift coefficient, lift-to-drag ratio and static stability. After a few evolutions, the non-dominated pareto individuals can be obtained. Pareto sets are all the set of possible and excellent solution across the design space. At any selections of the pareto set, these are no better solutions in all design space

• Ocean Systems Engineering
• /
• 제5권4호
• /
• pp.261-277
• /
• 2015

Internal solitary waves occur due to density stratification and are nonlinear in nature. These waves have been observed in many parts of the world including the South China Sea, Andaman Sea and Sulu Sea. Their effect on floating systems has been an emerging field of interest and recent offshore developments in the South China Sea where several offshore oil and gas discoveries are located have confirmed adverse effects including large platform motions and riser system damage. A valid numerical model conforming to the physics of internal waves is implemented in this paper and the effect on a spar platform is studied. The physics of internal waves is modeled by the Korteweg-de Vries (KdV) equation, which has a general solution involving Jacobian elliptical functions. The effects of vertical density stratification are captured by solving the Taylor Goldstein equation. Fully coupled time domain analyses are conducted to estimate the effect of internal waves on a typical truss spar, which is configured to South China Sea development requirements and environmental conditions. The hull, moorings and risers are considered as an integrated system and the platform global motions are analyzed. The study could be useful for future guidance and development of offshore systems in the South China Sea and other areas where the internal wave phenomenon is prominent.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.8-13
• /
• 2003

Soil, ground water, and sea bed are exposed to a continuous accumulation of polluted materials, causing serious environmental damage. It has been reported that such pollution causes a massive mortality of fish stock in rivers due to the resuspension of toxic chemicals, occurring during strong wind conditions. Therefore, it becomes apparent that there is an immediate demand for the restoration treatment of polluted river bed (or sea bed) sediment layers. Pollution levels of major rivers and ports, such as Paldang, Kyungan rivers, and Masan port, are becoming of great public concern, and are posing a serious environmental threat. In particular, the pollution of the Shi-hwa river has become a nation wide issue for the last few years. In spite of such public concern, the pollution levels of such rivers or ports are worsening everyday. In this study, an environmentally sound engineering package is introduced that helps to restore the polluted river bed or sea bed sediments. This engineering package consists of a suction facility, followed by a series of mechanical, chemical, and biological treatment units. The suction facility is designed to minimize secondary pollution that occurs from the resuspension of toxic materials during suction. The sea bed cleaning engineering package is designed to be installed on the top of a floating barge. Such a combination of environmental plant and shipbuilding technology provides a cost-effective solution, minimizing the transportation between suction and treatment facilities.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.53-60
• /
• 2009

Recently, since there are several problems in space, the infra-structure and the facilities in the contiguity of the existing harbors due to the trend of enlarging the container capacity of the large container vessel, a special floating platform named as the Mobile Harbor has been proposed conceptually as an effective solution of those problems. Two kinds of hull shapes, a conventional mono-hull type and a catamaran type, are proposed as midway feeders to transfer containers to the harbor on land from a large container ship on near shore. In this study, the motion response and mooring analysis are carried out for comparing the global performance of two types of Mobile Harbor. Robot arm mooring facility specially is devised and newly tried to use for the safe fixation of a large container ship and the Mobile Harbor on near shore. It would be expected for this comparison study to give a guideline to design the efficient hull form for a midway loader.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.167.2-167.2
• /
• 2011

Motions in nature, for example ocean wave, has been playing a significant role for generating electricity production in our modern life. This paper presents an innovative approach for electric power conversion of the vast ocean wave energy. Here, a floating-buoy wave energy converter (WEC) using hydrostatic transmission (HST), which is shortened as HSTWEC, is proposed and designed to enhance the wave energy harvesting task during all wave fluctuations. In this HSTWEC structure, the power take-off system (PTO) is a combination of the designed HST circuit and an electric generator to convert mechanical energy generated by ocean wave into electrical energy. Several design concepts of the HSTWEC have been considered in this study for an adequate investigation. Modeling and simulations using MATLAB/Simulink and AMESim are then carried out to evaluate these design concepts to find out the best solution. In addition, an adaptive controller is designed for improving the HSTWEC performance. The effectiveness of the proposed HSTWEC control system is finally proved by numerical simulations.

• Ocean Systems Engineering
• /
• 제4권3호
• /
• pp.215-241
• /
• 2014

Steel catenary riser (SCR) is a popular/economical solution for the oil/gas production in deep and ultra-deep water. The behavioral characteristics of SCR have a high correlation with the motion of floating production facility at its survival and operational environments. When large motions of surface floaters occur, such as FPSO in 100-yr storm case, they can cause unacceptable negative tension on SCR near TDZ (touch down zone) and the corresponding elastic deflection can be large due to local dynamic buckling. The generation, propagation, and decay of the elastic wave are also affected by SCR and seabed soil interaction effects. The temporary local dynamic buckling vanishes with the recovery of tension on SCR with the upheaval motion of surface floater. Unlike larger-scale, an-order-of-magnitude longer period global buckling driven by heat and pressure variations in subsea pipelines, the sub-critical local dynamic buckling of SCR is motion-driven and short cycled, which, however, can lead to permanent structural damage when the resulting stress is greatly amplified beyond the elastic limit. The phenomenon is extensively investigated in this paper by using the vessel-mooring-riser coupled dynamic analysis program. It is found that the moment of large downward heave motion at the farthest-horizontal-offset position is the most dangerous for the local dynamic buckling.