• 한국항해학회지
• /
• 제10권2호
• /
• pp.139-155
• /
• 1986

In this paper the dynamic effects due to the free water motions in tanks upon the lateral motion of a floating body in regular waves are calculated, in order to obtain the relationship between a motion of a floating body and that of the free water in tanks. Under the assumption that the fluid is ideal and motion amplitudes are small, velocity potential of the fluid in tanks is calculated by the source distribution method and the hydrodynamic forces and moments are calculated by the integration of fluid pressures over the tank surface. Hydrodynamic effects of the fluid on the floating body are expressed in terms of added mass and coupling coefficient obtained from the integration. Computations are carried out for ship with seven wide center tanks and comparisons between the liquid cargo loading case and the rigid cargo loading case are shown.

• Journal of Korean Neurosurgical Society
• /
• 제39권6호
• /
• pp.438-442
• /
• 2006

The sylvian aqueduct syndrome is a global rostral midbrain dysfunction induced by a transtentorial pressure gradient through the aquaeductus. Several months after ventriculoperitoneal shunt, a patient with hydrocephalus began experiencing a constellation of midbrain dysfunction symptoms, including bradykinesia, medial longitudinal fasciculus syndrome, third nerve palsy, and mutism. These were indicative of cerebral aqueduct syndrome. In addition, the patient showed posture-dependent underdrainage or overdrainage. All symptoms were resolved after distal catheter elongation and floating cranioplasty. We present a case of reversible parkinsonism, which developed in a patient with shunted hydrocephalus and aqueductal stenosis, and discuss the diagnosis and treatment of the sylvian aqueduct syndrome. We also review the literature to address problems of drainage and potential treatment modalities.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.285-293
• /
• 2019

In the present paper, model tests of suppressing sloshing fitted with two perforated floating plates are carried out. The study involves identification of system performance such as the suppression and the solidity ratio. Three different solidity ratios of perforated plates have been tried out as potential positive slosh damping devices. A series of painstaking experiments have been conducted in a rigid rectangular tank on six degrees of freedom motion platform under roll harmonic excitation. Comparison of the clean tank shows that the three types of perforated plates are all effective on damping the run-up and impact pressure along the bulkhead. The parametric study indicates that the perforated plate with the median solidity ratio is the most optimal one in suppressing sloshing among three configurations.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.43-51
• /
• 1992

The hydrodynamic performance of a floating-type OWC (Oscillating Water Column) chamber is studied numerically and experimentally in this study. The numerical approach based on two-dimensional linear theory of floating wave absorber was attempted to design an efficient wave energy absorber, while model test was performed in a wave basin to test a performance of designed model and validate the reliability of developed numerical code. The focus of study is placed mainly on the experimental study to evaluate the principal characteristics of the designed OWC chamber in regular waves. The effects of the variation of wave height on OWC device and of air pressure inside chamber are also presented. Finally, the measured results were compared with computed ones, and it was shown that the designed chamber works with high efficiency $(\eta_H>1$ over most of wave lengths covered by present study. It is therefore concluded that the developed code is capable of being successfully employed to design OWC chambers at various ocean environments, even though there exist some minor discrepancies between measured and computed results.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권2호
• /
• pp.67-73
• /
• 2005

부방파제의 특성을 간단히 검토하고 수치해법을 이용하여 소파성능을 분석하였다. 비점성 포텐셜 유동의 일반적인 해법인 경계면적분법을 사용하였고, 다양한 형상의 부방파제 2차원 단면특성을 투과율을 중심으로 살펴보았다. 계류계의 강도와 질량관성반경 및 흘수의 영향을 기본적인 폰툰 형태에 대하여 고찰하였고, 사다리꼴, 중절모형상, 탁자 형상 등의 단면에 대하여 형상에 변화를 주며 소파특성을 조사하였다. 각 단면마다 효과적인 소파가 기대되는 입사파의 파장이 달라지지만 입사파의 파장과 부체의 길이비가 10 이상이 되는 경우까지 만족스런 소파가 이루어지는 경우도 있다.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.51-62
• /
• 2013

The water wave interactions on any three-dimensional structure of arbitrary geometry can be calculated numerically through the use of source distribution or Green's function techniques. However, such a method can be computationally expensive. In the present study, the water wave interactions in floating circular cylinder arrays were investigated numerically using the eigenfunction expansion method with the three- dimensional potential theory to reduce the computational expense. The wave excitation force, added mass coefficient, radiation damping coefficient, and wave run-up are presented with the water wave interactions in an array of 5 or 9 cylinders. The effects of the number of cylinders and the spacing between them are examined because the water wave interactions in floating circular cylinder arrays are significantly dependent upon these.

• Journal of Multimedia Information System
• /
• 제7권4호
• /
• pp.269-276
• /
• 2020

The small craft including jet-board for leisure are commonly smaller than the general commercial vessels. For the floating vessel, the motion analysis is significantly important component to design the shape. It is, however, hardly predicting its behavior by using conventional boundary element method due to violating small amplitude assumption for potential theory. The computational fluid dynamics method can afford to simulate such small craft, but its grid system was not able to calculate motion, because movable body disturbs the grid system by confliction. The dynamics fluid body interaction model with over-set mesh system can be dealt with movable floating body under irregular ocean wave. In this study, several cases were considered to reveal that DFBI is essential method to predict floating body motion. The single phase simulate was conducted to establish the shape perfection, and then the validated vessel was simulated with ocean waves weather DFBI option on or off. Through the comparison, the results between the cases of DFBI on and off shows significantly difference. It was claimed that the DFBI was necessary not only to calculation body motion, but also to predict accurate drag and lift force on the floating body for small size craft.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.367-375
• /
• 2020

This paper presents an integrated analysis about dynamic performance of a Floating Offshore Wind Turbine (FOWT) OC4 DeepCwind with semi-submersible platform under real sea environment. The emphasis of this paper is to investigate how the wave mean drift force and slow-drift wave excitation load (Quadratic transfer function, namely QTF) influence the platform motions, mooring line tension and tower base bending moments. Second order potential theory is being used for computing linear and nonlinear wave effects, including first order wave force, mean drift force and slow-drift excitation loads. Morison model is utilized to account the viscous effect from fluid. This approach considers floating wind turbine as an integrated coupled system. Two time-domain solvers, SIMA (SIMO/RIFLEX/AERODYN) and FAST are being chosen to analyze the global response of the integrated coupled system under small, moderate and severe sea condition. Results show that second order mean drift force and slow-drift force will drift the floater away along wave propagation direction. At the same time, slow-drift force has larger effect than mean drift force. Also tension of the mooring line at fairlead and tower base loads are increased accordingly in all sea conditions under investigation.

• 한국진공학회지
• /
• 제16권1호
• /
• pp.15-22
• /
• 2007

$BCl_3-Cl_2$ 플라즈마에서 이온 강화 식각 시 source power에 따른GaAs(100)의 표면 형태 변화를 연구하였다. Floating potential에서는 이온 포격(bombardment)이 거의 없기 때문에, 화학적 반응에 의존한 순수한 습식 식각에 의해 나타나는 것과 같이 <110> 능선과 {111} facet으로 이루어진 표면이 관찰 되었다. 이러한 형태는 식각 시작후 1분 이내에 형성되기 시작하여 시간이 지남에 따라 커진다. 동일한 압력에서 source power를 변화시키면 식각된 표면이 다른 형태를 보인다. 100 W 정도의 낮은 source power에서는 결정학적 표면이 형성되지 않지만, 900 W 정도의 높은 source power에서는 결정학적 표면이 잘 형성된다. 이것은 건식 식각에 필수적인 여기된 반응성 물질의 양이 source power에 크게 좌우되기 때문이다. 높은 source power에서는 반응성 물질의 농도가 높아지고, 열역학적으로 가장 안정한 GaAs(100) 표면이 형성 된다. 반면에 반응성 물질이 부족할 경우에는 표면 형태는 sputtering에 의해 결정된다. Scaling theory에 기초한 표면의 통계적 분석 적용 시, 두개의 spatial exponent가 발견 되었다. 하나는 1 보다 작고 원자 수준의 표면형태 형성 기구에 의해 결정되고, 다른 하나는 1보다 크며 facet 형성 기구와 같이 큰 규모의 형태 형성 기구에 의한 결과로 생각된다.

• 전자공학회논문지D
• /
• 제36D권11호
• /
• pp.56-62
• /
• 1999

Flash EEPROM에서 칩 전체나 또는 칩의 한 블록에 속에 있는 모든 셀들의 소거는 Fowler-Nordheim (FN) 터널링 방식을 사용하여 일괄적으로 수행되고 있다. 이러한 FN 터널링에 의한 소거는 self-limited 공정이 아니기 때문에 일부의 셀들이 심하게 과소거되는 문제가 자주 발생하고 있다. 본 논문에서는 이러한 과소거 문제를 해결하기 위한 부유게이트의 최적 도핑 농도에 관하여 연구하였다. 이러한 연구를 위하여 다양한 도핑 농도를 갖는 n-type MOSFET과 MOS 커패시터를 제작하였고, 이 소자들의 전기적인 특성들을 측정 및 분석하였다. 실험 결과, 부유게이트의 도핑 농도가 충분히 낮다면 ($1.3{\times}10^{18}/cm^3$ 이하) 과소거가 방지될 수 있음을 볼 수 있었다. 이는, 소거시 부유게이트에 저장되었던 전자들의 대부분이 빠져나가면 부유게이트에 공핍층이 형성되어 부유게이트와 소스 사이의 전압 차가 감소하고 따라서 소거가 자동적으로 멈추기 때문이라고 판단된다. 반면에 부유게이트의 도핑 농도가 너무 낮을 경우 ($1.3{\times}10^{17}/cm^3$ 이하)에는 문턱 전압과 gm의 균일도가 크게 나빠졌는데, 이는 부유게이트에서 segregation으로 인한 불순물의 불균일한 손실에 의한 것이로 판단된다. 결론적으로 Flash EEPROM에서 과소거 현상을 방지하고 균일한 문턱 전압과 gm을 갖기 위한 최적의 부유게이트의 도핑 농도는 $1.3{\times}10^{17}/cm^3$에서 $1.3{\times}10^{18}/cm^3$의 범위인 것으로 발견되었다.