• Journal of KIISE
• /
• v.44 no.6
• /
• pp.559-565
• /
• 2017

A UAV(unmanned aerial vehicle) requires higher reliability for external effects such as electromagnetic interference because a UAV is operated by pre-designed programs that are not under human control. The design of a small UAV with a complete resistance against the external effects, however, is difficult because of its weight and size limitation. In this circumstance, a conventional small UAV dropped to the ground when an external effect caused the rebooting of the flight-control computer(FCC); therefore, this paper presents a novel algorithm for the improvement of the flight safety of a small UAV. The proposed algorithm consists of three steps. The first step comprises the calibration of the navigation equipment and validation of the calibrated data. The second step is the storage of the calibration data from the UAV take-off. The third step is the restoration of the calibration data when the UAV is in flight and FCC has been rebooted. The experiment results show that the flight-control system can be safely operated upon the rebooting of the FCC.

• KIISE Transactions on Computing Practices
• /
• v.21 no.1
• /
• pp.29-39
• /
• 2015

When new inertial navigation systems for an unmanned aerial vehicles are being developed and tested, construction of a fault-tolerant system is required because of various types of hazards caused by S/W and H/W faults. In this paper, a new fault-tolerant flight system that can be deployed into one or more FCCs (Flight Control Computers) is introduced, based on a partition scheme wherein each OFP (Operational Flight Program) partition uses an independent CPU and memory slot. The new fault-tolerant navigation system utilizes one or two FCCs, and executes a primary navigation OFP under development and a stable shadow OFP partition on each node. The fault-tolerant navigation system based on a single FCC can be used for UAVs with small payloads. For larger UAVs, an additional FCC with two OFP partitions can be used to provide both H/W and S/W fault-tolerance. The developed fault-tolerant navigation system significantly removes various hazards in testing new navigation S/Ws for UAVs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.7
• /
• pp.633-643
• /
• 2005

An unmanned aerial vehicle (UAV) is an aircraft controlled by .emote commands from ground station and/o. pre-programmed onboard autopilot system. A navigation system in the UAV provides a navigation data for a flight control computer(FCC). The FCC requires accurate and reliable position, velocity and attitude information for guidance and control. This paper proposes an ADGPS/INS integrated navigation system for a UAV. The proposed navigation system comprises an attitude determination GPS (ADGPS) receive., a navigation computer unit, and a low-cost commercial MEMS inertial measurement unit(IMU). The navigation algorithm contains a fault detection and isolation (FDI) function fur integrity. In order to evaluate the performance of the proposed navigation system, two flight tests were preformed using a small aircraft. The first flight test was carried out to confirm fundamental operation of the proposed navigation system and to check the effectiveness of the FDI algorithm. In the second flight test, the navigation performance and the benefit of the GPS attitude information were checked in a high dynamic environment. The flight test results show that the proposed ADGPS/INS integrated navigation system gives a reliable performance even when anomalous GPS data is provided and better navigation performance than a conventional GPS/INS integration unit.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2017

Most conventional processors execute program instructions in a sequential manner. On the other hand, VLIW processor can execute multiple instructions at the same time. It exploits instruction level parallelism to improve system performance. To that end, program code should be rearranged to VLIW instruction format by a compiler. The compiler determine an optimal execution order of instructions of a program code. This instruction ordering is also called instruction scheduling. The scheduling is an algorithm that decides the execution order for instruction codes in loop parts of a program so that the instruction level parallelism can be maximized. In this research, we apply an existing scheduling algorithm to a VLIW FCC and describe analysis results to further improve its performance. And, we present a solution to solve some limitation of the existing scheduling technique. By using our solution, FCC's performance can be improved upto 32% compared to the existing scheduling only setting.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.172-178
• /
• 2009

Recently, autopilot is essential to reduce pilot's workload and increase flight safety. Avionics system of the small aircraft also has progressively adopted centralized multi-processor and multi-process computing architectures similar to the integrated modular avionics of B-777. It is increased more and more that importance of the flight control system. In this paper, the performance of the autopilot for the small aircraft has been verified with Hardware-In-the-Loop Simulation(HILS). Also, the autopilot algorithm that is operated in the Flight Control Computer(FCC) for the Fly by Wire(FBW) was verified with PILS and compared with the HILS results for the several commercial autopilots.

• Journal of Mechanical Science and Technology
• /
• v.19 no.8
• /
• pp.1529-1543
• /
• 2005

Recently an unmanned aerial vehicle (UAV) has been widely used for military and civil applications. The role of a navigation system in the UAV is to provide navigation data to the flight control computer (FCC) for guidance and control. Since performance of the FCC is highly reliant on the navigation data, a fault in the navigation system may lead to a disastrous failure of the whole UAV. Therefore, the navigation system should possess a fault detection and isolation (FDI) algorithm. This paper proposes an attitude determination GPS/INS integrated navigation system with an FDI algorithm for a UAV. Hardware for the proposed navigation system has been developed. The developed hardware comprises a commercial inertial measurement unit (IMU) and the integrated navigation package (INP) which includes an attitude determination GPS (ADGPS) receiver and a navigation computer unit (NCU). The navigation algorithm was implemented in a real-time operating system with a multi-tasking structure. To evaluate performance of the proposed navigation system, a flight test has been performed using a small aircraft. The test results show that the proposed navigation system can give accurate navigation results even in a high dynamic environment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.498-509
• /
• 2010

In this paper, a waypoint guidance law Line Tracking algorithm is designed for testing an Unmanned Airship. In order to verify, we develop an autonomous flight control and test system of unmanned airship. The flight test system is composed FCC (Flight Control Computer), GCS (Ground Control System), Autopilot & Guidance program, GUI (Graphic User Interface) based analysis program, and Test Log Sheet for the management of flight test data. It contains flight test results of single-path & multi-path following, one point continuation turn, LOS guidance, and safe mode for emergency.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.381-382
• /
• 2019

본논문에서는 산업용 드론개발을 위한 안정성 향상에 대하여 연구하였다. 기존의 비행체의 경우 고신뢰도 대용량의 제어시스템을 이용하여 비행제어시스템을 구성하지만 무인 비행체는 소형 내장형시스템을 이용한다. 본 연구에서는 소형 무인 비행체에서 사용하는 소형 내장형 비행제어시스템에서 안정성을 개선하기 위한 방법으로 비행제어신호와 모터의 제어신호를 측정하여 안정상태와 이상상태를 구별한다. 제안한 방법은 기존의 비행제어시스템을 수정하지 않고 비행제어시스템의 감시가 가능 할 것으로 예상한다.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2546-2548
• /
• 2005

본 논문에서는 무인항공기의 비행제어시스템 개발 및 성능분석을 위한 HILS(Hardware-in-the-Loop-Simulation) 시스템의 구축을 제안한다. 제안한 HILS 시스템은 실시간 시뮬레이션 컴퓨터(dSPACE DS1005), 3축 모션테이블, 자세 센서, 지상통제장치(GCS; Ground Control Station), 비행제어컴퓨터(FCC; Flight Control Computer)로 구성된다. 실제 신호와 유사한 신호를 발생시키기 위한 실시간 시뮬레이션 컴퓨터는 dSPACE가 담당하며, 이 신호는 비행운동을 재현을 위한 3축 모션테이블을 동작시키게 된다. 모션테이블 상에 위치하는 자세센서 값과 GCS의 명령은 FCC의 입력으로 사용된다. 구현된 HILS 시스템을 이용하여 UAV의 제어알고리즘 및 자세센서 성능 검증을 수행하였다.

• International Journal of Aeronautical and Space Sciences
• /
• v.5 no.1
• /
• pp.57-63
• /
• 2004

UAV(Unmanned Aerial Vehicle) has become one of the most popularmilitary/commercial aerial robots in the new millennium. In spite of all theadvantages that UAVs inherently have, it is not an easv job to develop a UAVbecause it requires very systematic and complete approaches in full developmentenvelop. The ground test and evaluation phase has the utmost importance in thesense that a well-developed system can be best verified on the ground. In addition,many of the aircraft crashes in the flight tests were resulted from the incompletedevelopment procedure. In this research, a verification procedure of the wholeairbome integrated system was conducted including the flight management system.An airbome flight control computer(FCC) senses the extemal environment from thepehpheral devices and sends the control signal to the actuating system using theassigned control logic and flight test strategy. A ground test station controls themission during the test while the downlink data are transferred from the flightmanagement computer using the serial communication interface. The pilot controlbox also applies additional manual actuating commands. The whole system wastested/verified on the wind-tunnel system, which gave a good pitch controlperformance with a preUspecified flight test procedure. The ground test systemguarantees the performance of fundamental functions of airbome electronic systemfor the future flight tests.