• 한국추진공학회지
• /
• 제19권1호
• /
• pp.87-97
• /
• 2015

지상 조건에서 우주비행체의 기동 및 자세제어 로직을 검증하기 위한 일반적인 방법으로는 우주비행체 설계단계에서 비행 소프트웨어를 이용한 시뮬레이션과 우주비행체 조립 후 시스템 수준에서의 통합 기능시험이 있다. 최근에는 소형화 및 정밀화된 부품들을 사용함으로써 지상에서도 시뮬레이터의 구동을 통해 우주비행체의 기동 및 자세제어 로직을 검증하는 연구가 활발하게 진행되는 추세다. 본 연구에서는 우주비행체 시뮬레이터의 개념설계 수행시 필요한 기초 데이터를 도출하기 위해 시뮬레이터용 냉가스 추진시스템에 대한 연구개발 동향 및 주요 성능 특성에 대해 조사하였다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제1권2호
• /
• pp.269-272
• /
• 1995

본 논문에서는 자연지형의 3차원 투사도 제작기술에 비행기의 비행조건을 고려하여 개발한 비행 시뮬레이터에 대하여 설명하고자 한다. 여기서 발표하고자 하는 비행 시뮬레이터란 3차원의 자연지형을 마치 비행기를 타고가며 보는 것과 같은 효과를 낼 수 있게 하는 시스템을 말한다. 본 시스템은 사용자의 편의성을 도모하기 위하여 Sun workstation (SPARC 10)상에서 X11R5와 Motif 그리고 C언어를 이용하여 개발되었으며, 사용자가 비행경로, 비행속도, 비행고도 등의 비행 파라메타들을 마우스를 이용하여 손쉽게 입력할 수 있도록 구성되어 있다.

• 한국항공운항학회지
• /
• 제25권4호
• /
• pp.187-194
• /
• 2017

ICAO Universal Safety Oversight Audit Programme is a comprehensive evaluation for aviation safety matters, including aircraft operation, licensing and aircraft incident/accident investigation. As this programme is measures aviation safety level of States, there is a need to meet international standards, especially in the field of aircraft incident/accident investigation. This research discusses points required to satisfy international standards, which are independence and autonomy of an accident investigation board, the lack of the enough number of investigators and efficient management of those personnel, the effective composition and use of an investigation report, an accident investigation itself to build big data and the creation of a cooperation system among States. This paper suggests various opinions in order to enhance aviation safety especially through aircraft accident investigations, using case studies from the US, UK and Japan.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.51-51
• /
• 2003

인공위성의 개발 단계는 Prototype Model(PM), Engineering Model(EM), Qualification Model(QM) 그리고 Flight Model(FM)로 구분된다. 이때, Prototype 개발을 제외한 EM, QM, FM 개발단계는 반드시 종합조립시험(AIT)을 통하여 System Integration Test를 수행한다. 이 중에서 위성발사 전 최종 종합조립시험단계인 FM AIT는 위성의 최종시험단계이므로 Scenario Test를 포함한 지상에서 수행하여야 할 모든 시험을 수행한다. 이때, EM, QM 단계와는 다르게 FM AIT는 전기적 및 기계적 시험을 수행하나, 본 논문에서는 전기적 시험 과정과, Control Center 구성도 등을 포함하고 있는 Hardware 부분과, 관련 시험을 수행하게 될 Simulator를 포함한 Software 부분으로 나누어 소개하며, 기타 FM AIT 수행에 필요한 Electrical Ground Support System (EGSE) 전체 구성을 소개한다.

• 한국위성정보통신학회논문지
• /
• 제2권2호
• /
• pp.36-40
• /
• 2007

EGSE is used to check out satellite payload during the development prior to launch. The EGSE represented in this paper is a test system for Ka band communication transponder of COMS. The EGSE consist of two subsystems as CTS subsystem and PCTS subsystem. Communication Test subsystem (CTS) performs satellite transponder RF performance testing, data analysis and trending. Most of transponder RF performances are automatically tested by the CTS subsystem. Power, Command & Telemetry subsystem (PCTS) monitor telemetry messages from the transponder and send tele-commands to satellite transponder for the configuration change. PCTS also provide simulated S/C power to the transponder during the ground validation testing. The EGSE test functions are verified by the transponder simulator testing and will be used for the flight model transponders testing.

• 대한인간공학회지
• /
• 제15권2호
• /
• pp.99-111
• /
• 1996

In today's highly automated aircraft, the role of the pilot has changed from an airplane controller to a system manager. As a system manager in a cockpit, today's pilot is in charge of a management-level activity called cockpit task management( CTM). According to earlier studies, pilot errors in performing CTM activities were significant factors in a large number of aircraft accidents and incidents. The primary objective of this research was to reduce CTM-related pilot errors. A prototype pilot- vehicle interface called the cockpit task management system (CTMS) was developed and its effectiveness in improving CTM performance was evaluated. After the CTMS was implemented, it was integrated into a PC-based flight simulator to perform an experiment to evaluate its effectiveness. Eight volunteer subjects were used to collect performance data. The results of the experiment indicated that a statistically significant improvement was observed when the subjects flew with the assistance of the CTMS.

• 전자통신동향분석
• /
• 제35권4호
• /
• pp.81-90
• /
• 2020

The use of machine learning technologies such as deep and reinforcement learning has proliferated in various domains with the advancement of deep neural network studies. To make the learning successful, both big data acquisition and fast processing are required. However, for some physical world applications such as autonomous drone flight, it is difficult to achieve efficient learning because learning with a premature A.I. is dangerous, cost-ineffective, and time-consuming. To solve these problems, simulation-based approaches can be considered. In this study, we analyze recent trends in drone simulation technologies and compare their features. Subsequently, we introduce Octopus, which is a highly precise and scalable drone simulator being developed by ETRI.

• 한국CDE학회논문집
• /
• 제18권3호
• /
• pp.155-166
• /
• 2013

We present recent human-vehicle interaction (HVI) research conducted in the area of defense and military application. Research topics discussed in this paper include: training simulation for overland navigation tasks; expertise effects in overland navigation performance and scan patterns; pilot's perception and confidence on an overland navigation task; effects of UAV (Unmanned Aerial Vehicle) supervisory control on F-18 formation flight performance in a simulator environment; autonomy balancing in a manned-unmanned teaming (MUT) swarm attack, enabling visual detection of IED (Improvised Explosive Device) indicators through Perceptual Learning Assessment and Training; usability test on DaViTo (Data Visualization Tool); and modeling peripheral vision for moving target search and detection. Diverse and leading HVI study in the defense domain suggests future research direction in other HVI emerging areas such as automotive industry and aviation domain.

• 한국군사과학기술학회지
• /
• 제8권3호
• /
• pp.56-63
• /
• 2005

The radome boresight error degrades the microwave seeker ability and the missile guidance performance. It increases the miss distance, also. This paper propose a method of radome boresight error measurement and compensation. The compensation method consist of radome analysis and radome compensation. In the radome analysis stage, we can know that the electromagnetic characteristics distorted by radome. In the compensation stage, the look-up table is built and used for compensation. The test uses a FMS(Flight motion simulator) and adjusts the FMS setup error for more accuracy. The result shows that not using an elaborate radome measurement equipment, the radome boresight error is well compensated easily.

• 로봇학회논문지
• /
• 제18권3호
• /
• pp.316-322
• /
• 2023

The increasing popularity of autonomous unmanned aerial vehicles (UAVs) can be attributed to their wide range of applications. 3D path planning is one of the crucial components enabling autonomous flight. In this paper, we present a novel 3D path planning algorithm that generates and utilizes curvature-based trajectories. Our approach leverages circular properties, offering notable advantages. First, circular trajectories make collision detection easier. Second, the planning procedure is streamlined by eliminating the need for the spline process to generate dynamically feasible trajectories. To validate our proposed algorithm, we conducted simulations in Gazebo Simulator. Within the simulation, we placed various obstacles such as pillars, nets, trees, and walls. The results demonstrate the efficacy and potential of our proposed algorithm in facilitating efficient and reliable 3D path planning for UAVs.