• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.2
• /
• pp.61-69
• /
• 2022

Since the MPL (Multi-Crew Pilot License) Program was introduced in Korea in 2009, there has not been a single pilot licensed under the MPL Program. To successfully implement the MPL Program in Korea, it is necessary for an Approved Training Organization to develop the MPL Flight Instructor Training Program and foster excellent MPL Flight Instructors. However, there are no rules or guidelines regarding the MPL Flight Instructor Training Program in Korea. This study suggests the Training Specification for the MPL Flight Instructor, including the training syllabus, training and assessment methods. The MPL Flight Instructor Training Program should be composed of minimum 14-hour academic and practical training, which includes the concept of Competency-Based Training, CRM, Competency, Behavior Indicator and Assessment. To be qualified for the MPL Flight Instructor, candidates need to successfully complete the course and pass the practical test. In order to maintain the qualification, MPL Flight Instructors should comply to recency and recurrent training requirements.

• Proceedings of the Korean Society of Applied Entomolohy Conference
• /
• 2005.05a
• /
• pp.94-94
• /
• 2005

• Journal of the military operations research society of Korea
• /
• v.32 no.1
• /
• pp.176-187
• /
• 2006

It is difficult to estimate missile flight trajectory since a ballistic missile velocity is highly fast and has inherent behavior such as corkscrew due to unstable descending. This paper describes a comprehensive analysis of the flight trajectory characteristics of ballistic missiles. Various missile flight ranges based the comprehensive flight trajectory characteristics are derived by an analytical approach. It is shown analytically that threat due to the flight characteristics is significantly increased with reducing maximum missile ranges. This work is basic research of the establishment of operational concept for the lower tier missile defense system implementation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.479-488
• /
• 2019

The flight test operational procedure artifact includes mission planning, execution methods, and safety measures for each step of test progress. As the development of guided missiles has become more advanced and strategic, flight test has become increasingly complex and broadened. Therefore, increased reliability of the flight test operation procedures was required to ensure test safety. Particularly, the design of the flight test operational procedures required verification through M&S to predict and prepare for the uncertainty in a new test. The relevant studies have published the optimal framework development for flight tests and the model-based improvements of flight test processes, but they lacked the specificity to be applied directly to the flight test operational procedures. In addition, the flight test operational procedures, which consist of document bases, have caused problems such as limitations of analysis capabilities, insensitive expressions, and lack of scalability for the behavior and performance analysis of test resources. To improve these problems, this paper proposes how to design operational procedure of guided missile flight test system by applying MBSE(Model-based Systems Engineering). This research has improved reliability by increasing the ability to analyze the behavior and performance of test resources, and increased efficiency with the scalability applicable to multiple flight tests. That can be also used continuously for the guided missile flight tests that will be developed in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7204-7213
• /
• 2014

This study examined the impact on work life on health recognition and health behavior practices. The data was collected from 314 flight attendants from June to July 2014 in A airline. Questionnaires were used to measure the levels of health recognition, health behavior practice, Stress index, external image, and the impact on the work life. The data was analyzed using descriptive statistics, T-test, ANOVA, Pearson's correlation, structural equating model using the SPSS AMOS 18.0 program. The research showed that health care influences the external image and work life, and the health behavior practice influences the stress management. A survey of the various influencing factors of work life will be needed in terms of human resource management to provide quality service to customers, and health care programs for flight attendants in workplace will be needed.

• Journal of Wetlands Research
• /
• v.18 no.4
• /
• pp.350-356
• /
• 2016

The biggest factor in the success of breeding animals is selection of foods, which is determined by quality and quantity of habitats(Newton, 2003), in the case of This high biomass wetlands as an indicator of ecosystem function about Common Kestrel's choice of hunting area is expected to be an important clue of quality and quantity of habitats. For this study, it is divided into four types(Glasslands, Paddy fields, Dry fields, Rparian land) about Common Kestrel's hunting area in Yugu-eup, Gongju-si, Chungcheongnam-do, Recorded the behavior of Common Kestrel for three years during the breeding season from March to June(2014~2016). Result of investigation, hunting area showed a high hunting behavior in riversides and flight-hunting was frequently investigated from may to June. In addition flight-hunting's main food acquisition is mammal(the vole), while perching behavior's main food acquisition is insect according to the fact flight-hunting were mainly done in riversides, perching behavior were highly investigated than flight-hunting at glasslands and paddy fields and dry field. Hunting spot's coverage rate of plants covering the ground showed differences depending on hunting areas, but height of plants were not significant. Height of the plant according to hunting methods of flight-hunting to catch mammal(vole) was analyzed to prefer lower height than perching behavior Based on these results riversides are considered as a very important environmental factors for Common Kestrel's prey selection in breeding session.

• International Journal of Aerospace System Engineering
• /
• v.3 no.2
• /
• pp.1-8
• /
• 2016

The improvements in high performance and agility of modern fighter aircraft have led to improvements in survivability as well. Related to these performance increases are rapid response and adequate deflection of the control surfaces. Most control surface failures result from the failure of the actuator. Therefore, the failure and behavior of the actuators are essential to both combat aircraft survivability and maneuverability. In this study, we investigate the effects of flaperon actuator failure on flight maneuvers of a supersonic aircraft. The flight maneuvers were analyzed using six degrees of freedom (6DOF) simulations. This research will contribute to improvements in the reconfiguration of control surfaces and control allocation in flight control algorithms. This paper compares the results of these 6DOF simulations with the horizontal tail actuator failures analyzed previously.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.4
• /
• pp.1-6
• /
• 2023

EBT has designed and implemented a training program that relies on evidence from events such as Flight Operation Quality Assurance (FOQA), accidents, and incidents specific to each airline. The goal is to enhance the overall skills of the flight crew. This involves assessing the capabilities of individual crew members and, based on the findings, providing additional training to address any shortcomings. To create a training program aligned with the objectives of EBT, this study focused on analyzing data from hard landing incidents in domestic airlines obtained through FOQA events. A practical EBT training program was then developed, specifically targeting adverse weather conditions. The program evaluates landing capabilities, and the results guide the supplementation of any deficiencies in the landing skills of each flight crew member, ultimately aiming to enhance their confidence.

• Journal of Distribution Science
• /
• v.16 no.7
• /
• pp.17-24
• /
• 2018

Purpose - This study focuses on the quality of nonverbal communication by the flight attendants at the airline, and the factors that contribute to improve customer behavior, thereby providing positive implications for corporate management. Research, design, data, and methodology - For the empirical analysis of this study, reliability analysis and frequency analysis were conducted. T-test and ANOVA analyses were performed. In addition, the effects of nonverbal communication have on customer behavior have regressed analysis. The collected data was empirical suing the SPSS Win 18.0. Results - Among the non-verbal communication qualities were found to significantly influence customer attitudes, and demographic differences in airline flight attendants were also shown to influence their perceptions. Empirical analysis revealed significant differences in demographic characteristics between gender, age and airlines used. Conclusions - All of the non-verbal communication's attributes were found to significantly impact customer attitude. It is used to train the importance of nonverbal communication quality for the role of cabin crew members and to enhance the loyalty of the customers to Airline. This study identifies the relationship between the impact of non-verbal communication quality on customer attitudes and implies the importance of non-verbal communication quality for airline flight attendants. Also, this study suggests that there is a close mechanism between the nonverbal communication and the customer attitudes to airlines.

• Journal of Welding and Joining
• /
• v.28 no.2
• /
• pp.74-78
• /
• 2010

In this paper, a non-contact method of evaluating the thickness reduction in an aluminum sheet caused by corrosion and friction using SH-EMAT (shear horizontal, electromagnetic acoustic transducer) is described. Since this method is based on the measurement of the time-of-flight and amplitude change of guided waves caused from the thickness reduction, it provides information on the thinning defects. Information was obtained on the changes of the various wave features, such as their time-of-flight and amplitude, and their correlations with the thickness reduction were investigated. The interesting features in the dispersive behavior of selected guided modes were used for the detection of thinning defects. The measurements of these features using SH waves were performed on aluminum specimens with regions thinned by 7.2% to 29.5% of the total thickness. It is shown that the time-of-flight measurement provides an estimation of the thickness reduction and length of the thinning defects.