• 콘크리트학회논문집
• /
• 제12권2호
• /
• pp.71-78
• /
• 2000

This paper presents a study on the flexural rigidity of reinforced high strength concrete beams. Thirty six beams with different compressive strength of concrete, tensile reinforcement ratio, compressive reinforcement ratio, and pattern of loadings(1 point loading and 2 points loading) were tested to evaluate the effective moment of inertia. According to the experimental results, the eqation(1) proposed by ACI code for the effective moment of inertia overestimated that of simply supported reinforced high strength concrete beams. Thus, in this paper, an empirical equation(3) is proposed as a lower bound of 90% confidence limit to estimate the effective moment of inertia of simply supported reinforced high strength concrete beams.

• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.39-45
• /
• 2009

The purpose of this study is to establish flexural behavior of high-strength concrete beams confined in the pure bending zone with stirrups. The experiment was carried out on full-scale high-strength reinforced concrete beams, of which the compressive strengths were 40 MPa and 70 MPa. The beams were confined with rectangular closed stirrups. Test results are reviewed in terms of flexural capacity and ductility. The effect of web reinforcement ratio, longitudinal reinforcement ratio and shear span to beam depth ratio on ductility are investigated. The analytic method is based on finite element method using fiber-section model, which is known to define the behavior of reinforced concrete structures well up to the ultimate state and is proven to be valid by the verification with the experimental results above. It is found that confinement of concrete compressive regions with closed stirrups does not affect the flexural strength but results in a significantly increased ductility. Moreover, the ductility tends to increase as the quantity of stirrups increases by reducing the spacing of stirrups.

• Computers and Concrete
• /
• 제11권2호
• /
• pp.105-121
• /
• 2013

This paper investigates the parameters that control the design of Fiber Reinforced Polymer (FRP) reinforced concrete flexural members proportioned following the ACI 440.1R-06. It investigates the critical parameters that control the flexural design, such as the deflection limits, crack limits, flexural capacity, concrete compressive strength, beam span and cross section, and bar diameter, at various Mean-Ambient Temperatures (MAT). The results of this research suggest that the deflection and cracking requirements are the two most controlling limits for FRP reinforced concrete flexural members.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.567-572
• /
• 1999

Experimental study was conducted to investigate the flexural-shear behavior of hooked steel fiber reinforced high strength concrete (SFRHC) beams. Twenty beams with shear span-depth ratio of 1.45 were tested, of which variables were the contents of steel fiber with aspect ratio of 60, tension reinforcement ratio and concrete compressive of 60MPa and 80MPa. Test results has shown that shear failure of the beams were changed into flexural-shear failure or flexural failure according to increasing steel fiber content, that SFRHC with slump of 15cm over and fiber volume ratio of 1.5% was possible in practice, and that proper volume ratio of steel fiber was 1.5%.

• 한국지진공학회논문집
• /
• 제14권1호
• /
• pp.43-50
• /
• 2010

철근의 부식을 해결하기 위해 철근의 대체 재료로 적용 가능한 FRP에 대한 연구의 적용성이 대두되었다. 그러나 취성적인 성질과 탄성계수가 낮은 단점을 가지고 있어, FRP rebar로 보강된 휨 부재의 사용성 평가 즉 처짐에 대한 연구가 필요하다. 본 연구에서는 보강비를 변수로 한, CFRP rebar로 보강된 콘크리트 보의 휨 실험을 수행하였다. 실험 결과, CFRP rebar로 보강된 실험체는 보강비가 증가함에 따라 내력 및 강성이 증가하는 양상을 보였으며, 철근 실험체와 동일한 단면성능을 발휘하기 위해서는 약 1.3배의 보강비가 요구되는 것으로 나타났다. 또한 유효단면2차모멘트에 대한 기존 제안식의 비교 결과, Bischoff & Scanlon이 제안한 식이 가장 정밀해에 가까운 처짐을 예측하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권6호통권58호
• /
• pp.106-114
• /
• 2009

건조물문화재의 부식 및 노후화에 대한 보존수리는 원형유지를 기본원칙으로 하며, 수리로 인해 인위적인 훼손을 가하는 과오를 범해서도 안 된다. 따라서 합성수지를 이용한 보존처리방법이 부각되어지고 있다. 본 연구의 목적은 합성수지로 보강한 사각단면 목재의 휨 성능에 관한 연구로서 합성수지의 보강길이, 보강면적비율, 합성수지 재료강도, 보강위치를 변수로 하여 총 11개의 시험체를 제작하여 실험하였다. 이 연구의 결과는 목재의 휨 보강재로 합성수지의 보강효과가 있는 것으로 나타났으며, 사용 가능성을 확인 할 수 있었다.

• 한국산학기술학회논문지
• /
• 제12권8호
• /
• pp.3745-3751
• /
• 2011

본 연구에서는 사용 중에 있는 철근콘크리트 보의 사용하중 단계에 따른 탄소섬유 보강 후의 휨보강 효과를 분석 고찰하였다. 사용하중을 받는 RC 보의 탄소섬유시트 보강에 따른 원부재와의 초기변형률 차이와 하중상태에 따른 잔류변형률의 영향을 고려하고, 보강 후 거동에 영향을 미치는 해석변수들에 대한 비선형 단면해석을 수행하여, 보강단계에 따른 보강보의 거동특성 및 보강효과에 대해 고찰하고, 기존 실무에서 보강설계시 가장 많이 사용되는 신영수-홍건호식과 비교 검토하였다. 보강 겁수, 인장철근비, 단면치수비를 변수로 한 변수 해석을 수행하여 보강단계에 따른 휨강도의 변화를 확인하고 보강 시기에 따른 휨강도를 계산하고 휨보강 효과를 분석하였다.

• 대한건축학회논문집:구조계
• /
• 제36권4호
• /
• pp.123-133
• /
• 2020

The purpose of this study is to analyze the method of retrofitting flexural strength and the flexural performance of retrofitted shear walls. There are various ways to reinforce the flexural strength of reinforced concrete shear wall structural systems that have already been built, in the case of that, the external force is increased, and the internal force is insufficient. However, there are various problems, such as excessive flexural stiffness after reinforcement and increasing the thickness and length of the wall. We have developed a retrofit method to solve these problems. The wall end is excavated to place the required vertical rebars, and concrete is poured after placing rebars. This is the same concept as creating wall end boundary elements later on. We also studied the anchorage method of reinforcement and the interaction method between the retrofitting end and the existing wall. The flexural test results for the reinforced concrete shear wall using the studied retrofit method can be predicted according to the sectional analysis and FEM analysis, and there are differences in the plastic hinge length, crack propagation, stiffness degradation and energy dissipation due to the bending depending on the vertical rebar ratio of wall end.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.701-704
• /
• 1999

The purpose of this study was to investigate the effectiveness of the flexural rehabilitation of the pre-loaded reinforced concrete beams strengthened by the steel plate. Main test parameters were the existence and the magnitude of the pre-loading at the flexural of rehabilitation and the tensile reinforcement ratio of the specimens. Seven beam specimens were tested to investigate the effectiveness of the rehabilitation method. Test results showed that the ultimate load capacities of the pre-loaded specimens were higher than not-pre-loaded specimens at the rehabilitation. The cause of the pharameter was analyzed if is suggested that the bond failure between the concrete and the strengthening steel plate occured prior to the yielding of the tension reinforcement. The member flexural stiffnesses, were similar regardless of the load conditions at retrofit and failure modes showed brittle aspect caused by rip-off failure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.733-738
• /
• 2000

This paper was aimed to evaluate the structural performance of flexural members repaired by polymer cement and epoxy mortar at soffit. Main test variables were repair materials, ratio of reinforcement and additional reinforcing bars. Test results shows that the repaired beams could change flexural capacity by materials and additional reinforcing bars. In polymer cement, the section repaired can carry same load, cracking moment and the flexural stiffness of the monolithic beams with same size. In epoxy mortar, all data were greater than the shotcrete. However, note that epoxy mortar may conduct member into brittle failure mode.