• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.1-9
• /
• 2013

PURPOSES: The purpose of this study is to evaluate physical properties, durability, fatigue resistance, and long-term performance of poly-urethane concrete (PU) which can be possible application of thin layer on long-span orthotropic steel bridge and to check structural stability of bridge structure. METHODS : Various tests of physical properties, such as flexural strength, tensile strength, bond strength and coefficient of thermal expansion tests were conducted for physical property evaluation using two types of poly urethane concrete which have different curing time. Freezing and thawing test, accelerated weathering test and chloride ion penetration test were performed to evaluate the effect of exposed to marine environment. Beam fatigue test and small scale accelerated pavement test were performed to assess the resistance of PU against fatigue damage and long-term performance. Structural analysis were conducted to figure out structural stability of bridge structure and thin bridge deck pavement system. RESULTS: The property tests results showed that similar results were observed overall however the flexural strength of PUa was higher than those of PUb. It was also found that PU materials showed durability at marine environment. Beam fatigue test results showed that the resistances of the PUa against fatigue damage were two times higher than those of the PUb. It was found form small scale accelerated pavement test to evaluate long-term performance that there is no distress observed after 800,000 load applications. Structural analysis to figure out structural stability of bridge structure and thin bridge deck pavement system indicated that bridge structures were needed to increase thickness of steel deck plate or to improve longitudinal rib shape. CONCLUSIONS: It has been known that the use of PU can be positively considered to thin layer on long-span orthotropic steel bridge in terms of properties considered marine environment, resistance of fatigue damage and long-term performance.

• 콘크리트학회논문집
• /
• 제14권4호
• /
• pp.615-622
• /
• 2002

철근콘크리트 무량판 구조의 내력 및 변위를 합리적으로 예측하기 위해서는 슬래브의 휨 강성을 고려한 해석모델이 필요하다. FEMA 273과 ACI 318-99에서는 횡 하중에 대한 슬래브의 해석모델들을 제시하고 있으나 실제적인 적용 방법론은 언급하고 있지 않다. 본 연구에서는 무량판 슬래브의 모델링 방법론을 정립하고 이를 내진설계에 어떻게 적용할 것인가에 대하여 연구하였다. 연구결과는 다음과 같다. 1) 무량판 구조의 3차원 해석시 슬래브의 휨 강성을 적절히 고려하기 위해서는 본 연구진이 제시하는 유효보폭 모델을 적용하는 것이 바람직하다. 2) 예제 무량판 건물 해석에서 슬래브의 균열효과를 고려한 유효보폭을 이용할 경우 해석결과는 횡변위에 대하여 상한값을 나타낸 반면 유효보폭 계수만을 고려한 모델은 접합부 불균형 모멘트에 대하여 상한값의 결과를 나타냈다.

• 콘크리트학회논문집
• /
• 제22권3호
• /
• pp.297-303
• /
• 2010

현재 개발된 콘크리트 충전 대골형 파형 강판은 아치형 플레이트의 구조로서 그 특징은 구조물이 아치의 형상을 가지므로 모멘트가 작게 발생하는 압축력 지배구조의 구조적 특성을 가지게 되며 이에 따라 강재를 덧대 준공된 공간을 압축력에 유리한 콘크리트를 충전 강재 콘크리트 합성단면을 형성하여 압축력에 대한 강도 발현증대를 목적으로 한다. 이 연구에서는 새로운 개념의 콘크리트 충전 대골형 파형강판(브릿지 플레이트) 부재의 압축 및 휨 시험을 실시하여 평가된 압축력과 콘크리트 충전 브릿지 플레이트 구조물의 설계방법인 캐나다 도로교설계기준(CHBDC)의 방법으로 설계압축력을 산정하여 비교 검토함으로서 새로운 개념의 콘크리트 충전 브릿지 플레이트 부재의 안전율을 평가하였다. 설계압축력과 성능평가 시험을 통하여 얻어진 축력을 비교하여 안전율을 검토한 결과 적정 안전율 2.0이상 과도하게 나타나 CHCBD을 이용한 설계가 매우 보수적으로 평가되고 있으며, 이 연구 결과를 바탕으로 안전율을 설계에 반영한다면, 단면축소 및 시공비용 절감에 따른 경제적인 시공이 가능할 것으로 판단된다.

• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.539-547
• /
• 2012

To manufacture laminated wood with improved mechanical properties by providing uniform adhesiveness, the adhesive was applied and the plate adhesive was laminated on the wood surface. Then, after laminating the wood on the top part of the adhesivebond, it was heated and dried while the adhesive was stiffened using microwaves, and the test piece was manufactured by compressing it with the press machine for thirty minutes. The temperature and the water content were examined according to the heating time of the wood heated with the microwave, and testing was conducted on the shear strength and flexural strength of the wood. In addition, the microstructure of the adhesive bond between the wood was recorded to confirm the penetrabilityinto the wood structure for the adhesive. After the test was conducted, it was found that the test piece manufactured with wood that has its water content leveled with the microwave heating showed improved shear strength and bending strength compared to the standard test piece. With regard to adhesives, liquefied polyvinyl acetate resin and plate's PVB resin were found to have superior adhesive strength. Also, after filming the cellular microstructure, it was found that when the laminated wood is heated with microwaves, the infiltration of the adhesive into the inside of the wood becomes easy, which makes it effective for improving adhesiveness.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.43-51
• /
• 2008

This study examines shear capacity performance and structural characteristics of reinforced concrete beam using carbon fiber sheet(CFS), g)ass fiber sheet(GFS), glass fiber steel plate(GSP) and carbon fiber bar CB) which are reinforcing materials for reinforced concrete beam in order to produce similar condition to repair and reinforce actual structure and aims to provide data available In designing and constructing reinforced concrete structures under the structural damage. This study obtains the following conclusions. After considering the shear experiment results. it was indicated that the CB reinforced test object was the best in the shear capacity improvement and ductility capacity as it was contained in the concrete and was all operated, Also, GFS reinforced test object indicated the reduced flexural capacity but good shear capacity. GSP reinforced test object had bigger reinforcing strength than other reinforcing test objects. On the other hand, it showed the lowest reinforcement effect as compared section thickness of reinforced material because it showed the bigger relativity a section thickness of reinforced material. If the adherence to the concrete is improved, it will seem to show bigger reinforcement effect.

• 한국강구조학회 논문집
• /
• 제28권4호
• /
• pp.243-251
• /
• 2016

두께가 얇아짐에 따라 강바닥판은 윤하중의 작용으로 국부적으로 매우 큰 변형이 발생하고, 이것은 교면포장에 종방향으로 구조적인 균열을 야기 시킬 수 있다. 이 연구에서는 강바닥판의 윤하중 국부해석을 위하여 가로보의 휨 및 비틀림강성을 엄밀히 고려할 수 있는 평면쉘 스트립요소, 프리즘요소, 그리고 이 두요소를 연결하는 링크요소로 구성된 개선된 유한대판법을 제시하고자 한다. 이 방법의 효용성을 검증하기 위하여, 강판 플레이트 거더교의 일부를 해석예제로 선택하여 연직처짐 및 교축직각방향 변형율 결과를 쉘요소, 솔리드요소, 그리고 코히시브요소를 이용한 ABAQUS 해석결과와 비교, 검토하였다.

• 한국전산구조공학회논문집
• /
• 제25권5호
• /
• pp.447-454
• /
• 2012

중공슬래브 시스템은 슬래브 두께가 증가해도 자중은 크게 증가하지 않으면서 일반슬래브에 비해서 휨강성이 크게 저하되지 않는 장점이 있다. 그러나 이러한 장스팬 구조의 경우 바닥판 진동의 증가에 의한 사용성 문제가 발생할 수 있고, 특히 중공슬래브의 경우 기존의 구조시스템과 동적특성이 상이하다. 따라서 진동에 대한 중공슬래브의 안전성 및 사용성 검토가 요구되고 있으며, 이를 위한 실용적인 정밀해석이 필요하다. 본 연구에서는 효율적인 고유치 해석을 위하여 일방향 중공슬래브의 동적특성을 비교적 정확하게 나타낼 수 있는 등가의 플레이트 모델을 사용하였다. 결론적으로 등가플레이트 모델이 일방향 중공슬래브의 동적특정을 비교적 정확하게 나타나는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.553-558
• /
• 2000

In this study, a numerical simulation that can effectively predict the interfacial fracture behavior in repaired structures is developed using the axial deformation link elements. In repaired structures, concrete and interface are considered as quais-brittle materials, and steel plate as a repair material and reinforcement are modeled as elasto-plastic materials. The behavior of repaired reinforced concrete structures under flexural loading conditions is numerically simulated, and compaired with experimental results. The strengthening effect according to the length and thickness of the repair material is studied and rip-off, debonding and rupture failure mechanism of interface between substrate and repair materials are detected. It is shown that the interface properties affect on the mechanical behavior of repaired structures. Therefore, the developed numerical method using axial deformation link elements can be used for determining the strengthening effects and failure mechanism of repaired structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.159-160
• /
• 2014

The floor impact noise arising between upper and lower households in residential houses has been known as one of major causes worsening residential environment and still led to serious social troubles in a residential community. It is known that the heavy weight floor impact noise is induced by flexural vibration modes in the relatively lower frequency ranges. In this study, a procedure is examined to evaluate the relations between the vibration modes and the corresponding noise of the slab. In the process, for simplicity of the numerical analysis, it is assumed that the slab is simply supported plate-like structure and the acoustic mode formed in the lower room by acoustic boundary conditions is ignored.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.317-322
• /
• 2001

A mathematical modelling technique is proposed for estimating the additional bending stresses of tube(s)-in-tube structures due to tube-tube interaction, which has a significant effects on the shear-lag phenomenon. The proposed method simulates the framed-tube structures with multiple internal tubes as equivalent multiple tubes, each composed of four equivalent orthotropic plate panels. Hence, the tube(s)-in-tube structure can be analysed by using an analogy approach where each tube is individually modelled by a continuous beam that can account for the flexural and shear deformations as well as the shear-lag effects. The numerical analysis is applicable for the structural analysis of framed-tube structures with single and multiple internal tubes, as well as those without internal tubes. The shear-lag phenomenon of such structures is studied with additiona] bending stresses and shear-lag reversal points.