• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.224-232
• /
• 2014

PURPOSE. The purpose of the present study was to evaluate the effect of thermocycling and mechanical loading on the biaxial flexural strength and the phase transformation of one Ce-TZP/$Al_2O_3$ and two Y-TZP core materials. MATERIALS AND METHODS. Thirty disc-shaped specimens were obtained from each material. The specimens were randomly divided into three groups (control, thermocycled, and mechanically loaded). Thermocycling was subjected in distilled water for 10000 cycles. Mechanical loading was subjected with 200 N loads at a frequency of 2 Hz for 100000 times. The mean biaxial flexural strength and phase transformation of the specimens were tested. The Weibull modulus, characteristic strength, 10%, 5% and 1% probabilities of failure were calculated using the biaxial flexural strength data. RESULTS. The characteristic strengths of Ce-TZP/$Al_2O_3$ specimens were significantly higher in all groups compared with the other tested materials (P<.001). Statistical results of X-ray diffraction showed that thermocycling and mechanical loading did not affect the monoclinic phase content of the materials. According to Raman spectroscopy results, at the same point and the same material, mechanical loading significantly affected the phase fraction of all materials (P<.05). CONCLUSION. It was concluded that thermocycling and mechanical loading did not show negative effect on the mean biaxial strength of the tested materials.

• 대한치과보철학회지
• /
• 제38권4호
• /
• pp.500-509
• /
• 2000

In general, the three major oral functions of edentulous patients-mastication, phonation, esthetics-can be rehabilitated by the complete dentures, and both the resin based complete denture and the metal based complete denture are commonly used by many clinicians today. For the sake of many advantages such as the excellent thermal conductivity, low volumetric change, high strength, low risk of fracture and the better patient's adaptation, the metal based complete dentures are indicated to the several cases. But, there are common failures of these type of dentures mainly by the fracture or the debonding between the resin structures and the metal frameworks which is caused by the discrepancies of the flexural strength and the coefficient of thermal expansion. This is aggravated by the water contamination of the interface when exposed to the oral environment and results in the failure of complete denture treatment. So, the purpose of this study is to compare the bond strength and the fracture patterns of the gold alloy based and the Co-Cr alloy based complete dentures using the PMMA resins and the 4-META adhesive resins. The results of this study were as follows. 1. Both to the PMMA resin and the 4-META resin, the flexural bond strength of gold alloy is lower than that of Co-Cr alloy(P<0.05) 2. To the Co-Cr alloy, the bond strength of the 4-META resin is significantly higher than that of PMMA resin(P<0.05). 3. The flexural strength of the group with the mechanical retention form is significantly higher than that of the group without retention form(P<0.05). 4. Comparing with the other groups, the fracture patterns of the group 3 are quite different from the group 1,2,5.

• Advances in concrete construction
• /
• 제8권3호
• /
• pp.207-215
• /
• 2019

Application of nanotechnology can be used to tailor made cementitious composites owing to small dimension and physical behaviour of resulting hydration products. Because of high aspect ratio and extremely high strength, carbon nanotubes (CNTs) are perfect reinforcing materials. Hence, there is a great prospect to use CNTs in developing new generation cementitious materials. In the present paper, a parametric study has been conducted on cementitious composites reinforced by two types of multi walled carbon nanotubes (MWCNTs) designated as Type I CNT (10-20 nm outer dia.) and Type II CNT (30-50 nm outer dia.) with various concentrations ranging from 0.1% to 0.5% by weight of cement. To evaluate important properties such as flexural strength, strain to failure, elastic modulus and modulus of toughness of the CNT admixed specimens at different curing periods, flexural bending tests were performed. Results show that composites with Type II CNTs gave more strength as compared to Type I CNTs. The highest increase in strength (flexural and compressive) is of the order of 22% and 33%, respectively, compared to control samples. Modulus of toughness at 28 days showed highest improvement of 265% for Type II 0.3% CNT composites. It is obvious that an optimum percentage of CNT could exists for composites to achieve suitable reinforcement behaviour and desired strength properties. Based on the parametric study, a tentative optimum CNT concentration (0.3% by weight of cement) has been proposed. Scanning electron microscope image shows perfect crack bridging mechanism; several of the CNTs were shown to act as crack arrestors across fine cracks along with some CNTs breakage.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권5호
• /
• pp.143-150
• /
• 2022

이 논문은 내진 성능 향상 목적으로 외부 강재로 보강한 콘크리트 부재의 휨 성능에 대한 실험적 연구이다. 구조물을 보강하기 위하여 벽과 기둥을 보강재로 감싸는 형식의 보강 방법을 적용하였는데, 이 구조물에서 가장 긴 지간을 갖는 벽체 일부 단면을 실물 크기로 제작하여 정적 재하 실험을 수행하는 방법으로 강성 보강효과를 확인하였다. 실험 결과, 보강 단면은 충분한 보강 성능을 발현하는 것을 확인하였으나, 가력기의 용량 부족과 안전상의 문제로 파괴까지의 거동을 확인하지는 못하였다. 보강재가 벽체에 작용하는 면외방향 모멘트를 효과적으로 부담하고 있는 것을 확인하였고, 측정된 변위와 철근 변형률 등의 분석을 통하여 보강 전 부재에 비하여 부재 강성과 휨모멘트 저항능력이 향상되었음을 검증하였다.

• Advances in concrete construction
• /
• 제15권4호
• /
• pp.251-267
• /
• 2023

In this paper, an experimental investigation is carried out to assess the inherent self-compacting properties of geopolymer mortar and its impact on flexural strength of thin-walled ferro-geopolymer box beam. The inherent self-compacting properties of the optimal mix of normal geopolymer mortar was studied and compared with self-compacting cement mortar. To assess the flexural strength of box beams, a total of 3 box beams of size 1500 mm × 200 mm × 150 mm consisting of one ferro-cement box beam having a wall thickness of 40 mm utilizing self-compacting cement mortar and two ferro-geopolymer box beams with geopolymer mortar by varying the wall thickness between 40 mm and 50 mm were moulded. The ferro-cement box beam was cured in water and ferro-geopolymer box beams were cured in heat chamber at 75℃ - 80℃ for 24 hours. After curing, the specimens are subjected to flexural testing by applying load at one-third points. The result shows that the ultimate load carrying capacity of ferro-geopolymer and ferro-cement box beams are almost equal. In addition, the stiffness of the ferro-geoploymer box beam is reduced by 18.50% when compared to ferro-cement box beam. Simultaneously, the ductility index and energy absorption capacity are increased by 88.24% and 30.15%, respectively. It is also observed that the load carrying capacity and stiffness of ferro-geopolymer box beams decreases when the wall thickness is increased. At the same time, the ductility and energy absorption capacity increased by 17.50% and 8.25%, respectively. Moreover, all of the examined beams displayed a shear failure pattern.

• 대한토목학회논문집
• /
• 제26권3A호
• /
• pp.539-546
• /
• 2006

국내 LRFD 도로교설계규정을 정립하기 위한 기초 자료를 제공하기 위하여 단경간 플레이트 거더 및 박스 거더 합성단면을 하중저항계수설계법으로 설계하고 설계된 단면의 휨에 대한 신뢰도해석을 수행하였다. 신뢰도해석에서 휨저항강도는 최근 국내에서 생산된 16,000여 구조용 강재 표본의 항복강도 통계적 특성이 반영된 강합성단면의 휨저항강도 통계를 이용하였다. 활하중에 의한 작용모멘트 통계는 고정된 값을 사용하지 않고 편심계수 0.95-1.05를, 변동계수는 0.15-0.25로 가정하였다. 강거더 자중, 콘크리트 바닥판 자중, 포장면 자중 등에 의한 고정하중 모멘트 통계 값은 AASHTO 보정자료를 사용하였다. Rackwitz-Fiessler 법으로 신뢰도해석을 수행하고 지간별, 강거더 형식별, 활하중 모멘트의 불확실성 정도별로 신뢰도지수 계산 결과를 제시하였다.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.484-492
• /
• 2023

본 연구에서는 전기화학적 염화물 추출(ECE) 완료된 RC 보의 구조적 거동을 기존에 주로 사용되었던 부착 강도 측정이 아닌 3점 재하 시험을 통해 분석했다. 그 결과, ECE 처리에 의해 콘크리트 보의 휨 강성은 저하되었으나, 최대하중 측면에서 강도는 향상되는 것으로 나타났다. 또한, ECE에 의해 인장 변형률이 증가하여 인장 균열에 대한 저항성은 향상되었으며, 관성 모멘트 감소율은 감소하였다. 이러한 구조적 거동 측면의 이점에도 불구하고 연성 및 휨 강성은 저하되었다. 콘크리트보의 휨 강성은 선형 탄성 범위에서 유효 단면적의 손실로 인해 감소됐고, 실제로 인장변형에 의해 파손된 상태에서 단면 2차 모멘트는 약 70 %의 손실되었다. 그러나 이러한 단면 손실에 의한 관성 모멘트 감소율은 ECE에 의해 더 낮아졌는데, 이는 균열에 대한 저항성이 증가되는 반면, 변형량이 증가되어 사용성 측면에서의 위험성은 더 증가됨을 의미한다.

• 콘크리트학회논문집
• /
• 제20권6호
• /
• pp.809-820
• /
• 2008

니브 플레이트 길이가 1,500 mm인 새로운 실물크기 개량 더블티 슬래브를 제안, 설계하고 종국 휨강도까지 실험에 의하여 평가하였다. 이 슬래브는 기존의 PCI 더블티와 같은 티 (tee)단면과 새로이 개조된 플레이트단면으로 구성되어있으며, 긴장력은 티 (tee)단면 하부에만 적용되었다. 이 실험체는 국내 프리캐스트 공장에서 제작한 실험체이다. 휨실험에 의하여 티 (tee)단면이 종국 휨강도를 발휘할 때까지 개조된 댑단부를 포함한 니브 플레이트 단면의 안전성과 사용성을 평가하려 하였다. 하중을 가력할수록 초기 휨 균열들이 더블티 하단에서 발생하였고, 그 후 휨전단과 사인장 균열들은 댑단부와 니브 부분으로 증가하여 발생하였다. 제안한 개량 더블티 슬래브는 설계하중 이상의 휨 내력으로 고르게 분포된 많은 휨균열과 함께 연성 파괴되었다. 두께 250 mm의 니브 플레이트부분은 사용하중 하에서 어떠한 균열도 발생하지 않았고, 티 (tee)부분의 극한하중 하에서도 미소한 휨균열만 보여주었다. 제안하는 실험체는 이 실험에서 설계기준 조건을 만족시키는 강도와 연성거동을 보여주었다. 보다 효율적인 활용을 위하여, 니브 플레이트 두께와 인장철근을 감소시킬 수 있는 추가 실험이 제안하는 개량 댑 더블티에 대하여 요구된다.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.401-412
• /
• 1997

There has been many researches aimed at reinforcing the strength of resin, and these have led to the development and use of numerous materials in recent years. A case in point, is the recent development of plasma-treated polyethylene fiber which has been used mainly in fixed provisional restoration to reduce the incidence of fractures. This study aims at assessing whether plasma-treated polyethylene fiber as applied to composite resin is effective in increasing the flexural strength and how applied portions affect this. Twenty-four applied and eight unapplied composite resin bars were fabricated. Twenty-four applied specimens were divided into three groups. Plasma treated polyethylene fiber was applied to the groups each with different portions of composite resin. In the first group, plasma-treated polyethylene fiber was not applied. In the second group, fiber was applied to the compression side of composite resin. Fiber was applied to the tension side in the third group, while fiber was embedded in the tension side of the composite resin in the fourth group. Each specimen was tested by use of a three-point bending strength test with an instron testing machine, and the flexural strength was calculated. The following results were obtained. : 1. Under the conditions of this study, the third and fourth groups demonstrated a statistically greater flexural strength compared to the first and second groups. 2. But there was no statistically significant difference, not only between the first group and the second group, but also between the third group and the fourth group. Taken together, it can be concluded that plasma-treated polyethylene fiber applied to composite resin is an effective method in increasing flexural strength, and the best way of increasing the flexural strength is by application of plasma-treated polyethylene fiber to the tension side, or the embedding of same in composite resin. It must be mentioned however that this test used a static single-load test method. This method determined the maximum stresses that could be tolerated, but this might not be valid where the prediction of clinical failure is concerned. In order therefore to clinically utilize plasma-treated polyethylene fiber to reinforce the composite resin, it is suggested that a further study which considers the various loads be undertaken.

• 대한토목학회논문집
• /
• 제34권1호
• /
• pp.73-85
• /
• 2014

CFT 기둥은 시공이 간단하고 경제적이며 구조성능이 우수한 현장타설 매입형 연결 형식이다. 본 연구에서는 모듈러 교각에 적용되는 CFT 기둥-기초 연결부 형식을 제안하고, 실험을 통하여 구조성능을 평가하였다. 기둥-기초 연결부의 구조성능을 평가하기 위해서 기초부 콘크리트에 매입되는 CFT 기둥의 매입깊이를 변수로 총 4개의 실험체를 제작하여 실험을 수행하였다. 준정적 실험결과, 매입깊이가 0.6D인 실험체에서는 낮은 하중단계에서 기초부의 콘파괴로 인하여 상대적으로 낮은 연성능력을 보였다. 그러나 매입깊이가 0.9D 이상인 실험체에서는 기초부의 콘파괴가 방지되고 CFT 기둥 하단부에서 전형적인 휨파괴 거동을 보이며 높은 연성능력을 발휘하였다. 하중-변위 이력곡선, 변위 연성도 및 에너지 소산능력 등을 분석한 결과, 제안된 CFT 기둥-기초 연결부의 매입깊이는 0.9D~1.2D 수준이 내진성능을 발휘하는 합리적인 수준인 것으로 평가되었다.