• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.254-259
• /
• 1992

In this paper, we propose an optimal method for the tracking a trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint equations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation of flexible planner manipulator is presented.

• Structural Engineering and Mechanics
• /
• 제59권2호
• /
• pp.243-259
• /
• 2016

This research develops a finite element code for the transient dynamic analysis of tapered fiber reinforced polymer (FRP) poles with hollow circular cross-section and flexible joints used in power transmission lines. The FRP poles are modeled by tapered beam elements and their flexible joints by a rotational spring. To solve the time equations of transient dynamic analysis, precise time integration method is utilized. In order to verify the utilized formulations, a typical jointed FRP pole under step, triangular and sine pulses is analyzed by the developed finite element code and also ANSYS commercial finite element software for comparison. Thereafter, the effect of joint flexibility on its dynamic behavior is investigated. It is observed that by increasing the joint stiffness, the amplitude of the pole tip deflection history decreases, and the time of occurrence of the maximum deflection is earlier.

• 복식문화연구
• /
• 제8권4호
• /
• pp.587-601
• /
• 2000

The purpose of this study : 1. The total 56 range measurements of active dynamic motion of 40 subjects (20's and 30's) were measured using 3-D dynamic motion analysis system. 2. Various comparisons were performed for the right and left side, male, age groups (20's, 30's, and 40's ∼ 60's) using previous studies. The results were compared with the other studies in the aspects of age. In this study, the 3-D motion analysis system based on photogrammetry was established and used to analyze the human's motion and posture. The system consists of VICON 140, data acquisition system, and data analysis program (KRISSMAS). The result of this study were as follows : 1. Comparing 20's with 30's the result shows that 30's have larger ROM at some joints, which is inconsistent with the previous result. The reason is that female subjects in 20's were improperly sampled according to the representatives of anthropometry characteristics. 2. There are significant differences in some joints related with age. 20's male subjects have more flexible joints in the neck while 30's male subjects have more flexibility in their shoulder joint and elbow joint. But most of the significances were not high (p〈0.05). The prediction that the right side of Korean bodies would be more flexible was not a good hypothesis. And the joints flexibilities are not correlated with Rohrer's Index.

• 한국지반공학회지:지반
• /
• 제7권4호
• /
• pp.15-24
• /
• 1991

본 연구에서는 부등침하를 받는 매설관 연성이음부 하부의 베딩보강에 관한 적용성을 유한요소해 석을통하여 검토하였다. 매설관하부 기초지반에 설치된 콘크리트베딩의 강성 변화에 따른연성이 음부의 변형억제효과를 분석하였다. 지반부등침하가 발생하는 현장조건을 크게 세가지로 구분하였 으며 각 경계조건별로 베딩강성 변화에 따른 연성이음관의 변형형태를 살펴보았다. 해석결과는 보강과 비보강조건을 상호 비교 검토하여 콘크리트 베딩보강에 의한 연성이음관의 침하억제효과를 살펴보았다.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.133-140
• /
• 1993

In this paper, we prpose a method for tracking optimally a spatial trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint euqations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation result of a flexible planar manipulator is presented.

• The Journal of Korean Physical Therapy
• /
• 제31권1호
• /
• pp.13-17
• /
• 2019

Purpose: This study examined the effects of flexible flatfeet on the accuracy of knee joint motions in closed and open kinetic chain tasks. Methods: Twenty-four healthy participants were recruited for this study. The subjects were divided into two groups using a navicular drop (ND) test: flexible flatfoot group (n=12, male: 6, aged $22.00{\pm}2.22years$) and age-matched control group (n=12, males: 6, aged $22.17{\pm}1.53years$). The accuracy of knee motion was measured quantitatively by tracing through the flexion and extension motion of the knee joints in the closed kinetic chain and the open kinetic chain. Results: There was a significant difference in the accuracy index between the groups in closed kinetic chain task, but there was no significant difference in the open kinetic chain task. In addition, there was a significant difference in the accuracy index between the closed kinetic chain and the open kinetic chain task in the flexible flatfoot group. In addition, a significant negative correlation was observed between the ND and accuracy index in the closed kinematic chain task, but there was no significant relationship between the ND and accuracy index in the open kinematic chain task. Conclusion: Flexible flatfeet can affect the accuracy of the adjacent joints, such as the knee joint in the closed kinematic chain.

• 전산구조공학
• /
• 제10권1호
• /
• pp.213-223
• /
• 1997

복잡한 구조물의 거동을 해석하는 데 있어서 초기 설계단계에서 부터 쉘요소를 사용하여 해석하는 것은 많은 시간과 경비가 요구된다. 이에 경비절감의 측면에서 쉘구조물을 단순 보구조물에 의해 모델링함에 의해 분석하고자 하는 연구가 진행되어왔다. 본 연구에서는 단순화된 보구조물의 결합부에 고려하기 위한 유연도를 나타내는 굽힘회전강성을 결정하는 방법을 제안하고, 제안된 방법을 통해 얻어진 결합부에서의 유연도을 보구조물의 결합부에 적용하여 비선형해석을 수행한다. 수치해석 결과로 쉘구조물에서 나타나는 기하학적 비선형거동을 결합부에서 유연도를 고려하는 단순 보구조물에 의해 작은 오차의 범위안에서 기술할 수 있었다.

• 대한물리의학회지
• /
• 제16권4호
• /
• pp.1-11
• /
• 2021

PURPOSE: Lumbosacral orthosis (LSO) is often used to help manage low back pain because it is economical and effective. This study examined the effects of flexible and semirigid LSOs on the lower-limb joint angles in walking in patients with chronic low back pain. METHODS: The effects of the lumbosacral orthosis during gait on the sagittal, frontal, horizontal planes and the change in lower limb angle were examined in fourteen chronic low back pain patients who walked without wearing a LSO, wearing a flexible LSO, and wearing a semirigid LSO in random order for three-dimensional motion analysis. RESULTS: The flexion of the hip and knee joints decreased more significantly during walking with an LSO than without one. The genu valgum angles were reduced in the stance phase more during walking with an LSO than without one. The external rotation of the knee joints in the stance phase increased more during walking with an LSO than without one. CONCLUSION: The angles of the lower-limb joints of patients with chronic low back pain are affected by walking with an LSO, and the effects increased as the LSO stiffened.

• 한국산업융합학회 논문집
• /
• 제21권4호
• /
• pp.183-189
• /
• 2018

The focus of this paper is to design and control a three fingered hand system with eight axes for smart factory with an flexible controller, and to keep a useful big database for dynamic manipulation based on the experimental results. The weight of the hand module is only 1.2 kg, but flexible motion and powerful grasping are possible. To achieve such a flexible motion control of a robotic hand, we have developed a robust and precise fingered hand with a control system incorporating image recognition system in which we deal with the problems of not only accuracy and range of motion but also the flexibility of hand. The fingers are arranged so as to grasp both circular and prismatic objects. In order to achieve the light mechanism, we reduced the number of joints and fingers as much as possible. In this study, it was used three fingers with eight axes which is the optimal number to achieve a robust grasping diverse shape parts for smart factory.

• 한국정밀공학회지
• /
• 제28권4호
• /
• pp.446-454
• /
• 2011

In terms of the anatomy and mechanics of the human foot, a flexible robot foot with toes and heel joints is designed for a bipedal walking robot. We suggest three design considerations in determining foot design parameters which are critical for walking stability. Those include the position of the frontal toe, the stiffness of toes and heels, and the position of the ankle joint. Compared with the conventional foot with flat sale, the proposed foot is advantageous for human-like walking due to the inherent structural flexibility and the reasonable parameter values. Simulation results are provided to determine the design parameters and also show that the proposed foot enables smaller energy consumption.