• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.254-259
• /
• 1992

In this paper, we propose an optimal method for the tracking a trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint equations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation of flexible planner manipulator is presented.

• Structural Engineering and Mechanics
• /
• v.59 no.2
• /
• pp.243-259
• /
• 2016

This research develops a finite element code for the transient dynamic analysis of tapered fiber reinforced polymer (FRP) poles with hollow circular cross-section and flexible joints used in power transmission lines. The FRP poles are modeled by tapered beam elements and their flexible joints by a rotational spring. To solve the time equations of transient dynamic analysis, precise time integration method is utilized. In order to verify the utilized formulations, a typical jointed FRP pole under step, triangular and sine pulses is analyzed by the developed finite element code and also ANSYS commercial finite element software for comparison. Thereafter, the effect of joint flexibility on its dynamic behavior is investigated. It is observed that by increasing the joint stiffness, the amplitude of the pole tip deflection history decreases, and the time of occurrence of the maximum deflection is earlier.

• The Research Journal of the Costume Culture
• /
• v.8 no.4
• /
• pp.587-601
• /
• 2000

The purpose of this study : 1. The total 56 range measurements of active dynamic motion of 40 subjects (20's and 30's) were measured using 3-D dynamic motion analysis system. 2. Various comparisons were performed for the right and left side, male, age groups (20's, 30's, and 40's ∼ 60's) using previous studies. The results were compared with the other studies in the aspects of age. In this study, the 3-D motion analysis system based on photogrammetry was established and used to analyze the human's motion and posture. The system consists of VICON 140, data acquisition system, and data analysis program (KRISSMAS). The result of this study were as follows : 1. Comparing 20's with 30's the result shows that 30's have larger ROM at some joints, which is inconsistent with the previous result. The reason is that female subjects in 20's were improperly sampled according to the representatives of anthropometry characteristics. 2. There are significant differences in some joints related with age. 20's male subjects have more flexible joints in the neck while 30's male subjects have more flexibility in their shoulder joint and elbow joint. But most of the significances were not high (p〈0.05). The prediction that the right side of Korean bodies would be more flexible was not a good hypothesis. And the joints flexibilities are not correlated with Rohrer's Index.

• Geotechnical Engineering
• /
• v.7 no.4
• /
• pp.15-24
• /
• 1991

This paper reports the application study of the concrete bedding reinforcement under a buried conduit with flexible joints subjected to differential settlement via a finite elemen modeling. The reinforcement of concrete bedding helps to minimize the differential settlement between the adjoining conduit segments. Three different field conditions have been considered. The settlement pattern and deformation slope have been evaluated for each boundary condition. The analysis results are compared for both non-reinforced and reinforced cases to measure the effectiveness of concrete bedding reinforcement for restraining deformation of a conduit with flexible joints.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.133-140
• /
• 1993

In this paper, we prpose a method for tracking optimally a spatial trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint euqations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation result of a flexible planar manipulator is presented.

• The Journal of Korean Physical Therapy
• /
• v.31 no.1
• /
• pp.13-17
• /
• 2019

Purpose: This study examined the effects of flexible flatfeet on the accuracy of knee joint motions in closed and open kinetic chain tasks. Methods: Twenty-four healthy participants were recruited for this study. The subjects were divided into two groups using a navicular drop (ND) test: flexible flatfoot group (n=12, male: 6, aged $22.00{\pm}2.22years$) and age-matched control group (n=12, males: 6, aged $22.17{\pm}1.53years$). The accuracy of knee motion was measured quantitatively by tracing through the flexion and extension motion of the knee joints in the closed kinetic chain and the open kinetic chain. Results: There was a significant difference in the accuracy index between the groups in closed kinetic chain task, but there was no significant difference in the open kinetic chain task. In addition, there was a significant difference in the accuracy index between the closed kinetic chain and the open kinetic chain task in the flexible flatfoot group. In addition, a significant negative correlation was observed between the ND and accuracy index in the closed kinematic chain task, but there was no significant relationship between the ND and accuracy index in the open kinematic chain task. Conclusion: Flexible flatfeet can affect the accuracy of the adjacent joints, such as the knee joint in the closed kinematic chain.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.213-223
• /
• 1997

In the analysis of the behavior of a complex structure, it requires much time and cost to analyze its behavior by using shell elements at the early design concept. For the purpose of the decrease of time and cost, many researches have been performed with the intention to analyze its behavior through replacing a shell model by a simple beam model. In the present study, a method is proposed for determining a bending spring stiffness which means the flexibility for applying into the joints of the simple beam model. Geometrically nonlinear analysis is performed through the application of the determined flexibility into joints of the simple beam model. The nonlinear behavior of thin-walled tube shell structure can be described within a little error through the simple beam model with flexible joints.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.4
• /
• pp.1-11
• /
• 2021

PURPOSE: Lumbosacral orthosis (LSO) is often used to help manage low back pain because it is economical and effective. This study examined the effects of flexible and semirigid LSOs on the lower-limb joint angles in walking in patients with chronic low back pain. METHODS: The effects of the lumbosacral orthosis during gait on the sagittal, frontal, horizontal planes and the change in lower limb angle were examined in fourteen chronic low back pain patients who walked without wearing a LSO, wearing a flexible LSO, and wearing a semirigid LSO in random order for three-dimensional motion analysis. RESULTS: The flexion of the hip and knee joints decreased more significantly during walking with an LSO than without one. The genu valgum angles were reduced in the stance phase more during walking with an LSO than without one. The external rotation of the knee joints in the stance phase increased more during walking with an LSO than without one. CONCLUSION: The angles of the lower-limb joints of patients with chronic low back pain are affected by walking with an LSO, and the effects increased as the LSO stiffened.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.4
• /
• pp.183-189
• /
• 2018

The focus of this paper is to design and control a three fingered hand system with eight axes for smart factory with an flexible controller, and to keep a useful big database for dynamic manipulation based on the experimental results. The weight of the hand module is only 1.2 kg, but flexible motion and powerful grasping are possible. To achieve such a flexible motion control of a robotic hand, we have developed a robust and precise fingered hand with a control system incorporating image recognition system in which we deal with the problems of not only accuracy and range of motion but also the flexibility of hand. The fingers are arranged so as to grasp both circular and prismatic objects. In order to achieve the light mechanism, we reduced the number of joints and fingers as much as possible. In this study, it was used three fingers with eight axes which is the optimal number to achieve a robust grasping diverse shape parts for smart factory.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.446-454
• /
• 2011

In terms of the anatomy and mechanics of the human foot, a flexible robot foot with toes and heel joints is designed for a bipedal walking robot. We suggest three design considerations in determining foot design parameters which are critical for walking stability. Those include the position of the frontal toe, the stiffness of toes and heels, and the position of the ankle joint. Compared with the conventional foot with flat sale, the proposed foot is advantageous for human-like walking due to the inherent structural flexibility and the reasonable parameter values. Simulation results are provided to determine the design parameters and also show that the proposed foot enables smaller energy consumption.