• Food Science and Biotechnology
• /
• 제16권1호
• /
• pp.8-17
• /
• 2007

The main purpose of flavor research using conventional extraction methods, such as solvent extraction, distillation, and dynamic headspace, is to effectively extract, identify, and quantify flavor volatiles present in food matrices. In recent flavor research, the importance of understanding flavor release during mastication is increasing, because only volatiles available in the headspace contribute to the perception of food 'flavors'. Odor potency differs among flavor volatiles, and the physicochemical characteristics of flavor volatiles affect their release behavior and interaction with various food matrices. In this review, a general overview of flavor release and flavor-food interactions within frozen dessert systems is given with emphasis on chemical, physiological, and perceptual aspects. Chemical and sensory analysis methods competent for investigating such flavor-food interactions are illustrated. Statistical analysis techniques recommended for data acquired from such experiments are also discussed.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.185-189
• /
• 2009

Microencapsulation of flavor was carried out by molecular inclusion process using $\beta$-cyclodextrin (${\beta}CD$). ${\beta}CD$-flavor complex was prepared at various flavor-to-${\beta}CD$ ratios (1:6-1:12) to determine the effect of ${\beta}CD$ concentration on the inclusion efficiency. Maximum total oil retention and minimal surface oil content were obtained at flavors to ${\beta}CD$ ratio of 1:10. The physical properties and controlled release pattern of flavors from ${\beta}CD$-flavor complex were measured and compared with spray-dried microcapsules prepared using carbohydrate wall system. ${\beta}CD$-flavor complex showed higher total oil retention and surface oil contents, smaller mean particle size, lower moisture uptake, and higher oxidation stability than spray-dried microcapsule. Oxidative stability of flavor was correlated with hygroscopicity of wall materials. The controlled release mechanism was highly affected by temperature and characteristics of wall materials.

• 한국식품과학회지
• /
• 제32권1호
• /
• pp.132-139
• /
• 2000

본 연구는 분무건조를 이용한 미세캡슐화 기술을 이용하여 유화압력 및 분무건조에 있어서 송풍 온도와 분무 속도를 최적화하는데 목표를 갖고 수행되었다. 분석지표로 유화액의 유화안정성과 flavor release를, 분무건조 분말의 total oil, surface oil, flavor release, 흡습성을 측정하고, SEM에 의해 분말의 형태를 관찰하였다. Wall system을 이용하여 piston-type homogenizer의 압력을 달리하여 실험한 결과 향기성분의 미세캡슐화를 위한 최적 유화압력은 20.7MPa이었다. 분무건조공정에 있어서 송풍 온도와 분무 속도를 독립변수로, total oil retention, surface oil content, flavor release를 종속변수로 반응 표면 분석법을 행한 결과 송풍 온도는 $170{\circ}C$, 분무 속도는 15,000rpm이 우수한 공정 조건임을 예측 할 수 있었다.

• 한국축산식품학회지
• /
• 제39권5호
• /
• pp.780-791
• /
• 2019

This study aimed to extend the retention of flavor in coffee-containing milk beverage by microencapsulation. The core material was caramel flavor, and the primary and secondary coating materials were medium-chain triglyceride and maltodextrin, respectively. Polyglycerol polyricinoleate was used as the primary emulsifier, and the secondary emulsifier was polyoxyethylene sorbitan monolaurate. Response surface methodology was employed to determine optimum microencapsulation conditions, and headspace solid-phase microextraction was used to detect the caramel flavor during storage. The microencapsulation yield of the caramel flavor increased as the ratio of primary to secondary coating material increased. The optimum ratio of core to primary coating material for the water-in-oil (W/O) phase was 1:9, and that of the W/O phase to the secondary coating material was also 1:9. Microencapsulation yield was observed to be approximately 93.43%. In case of in vitro release behavior, the release rate of the capsules in the simulated gastric environment was feeble; however, the release rate in the simulated intestinal environment rapidly increased within 30 min, and nearly 70% of the core material was released within 120 min. The caramel flavor-supplemented beverage sample exhibited an exponential degradation in its flavor components. However, microcapsules containing flavor samples showed sustained flavor release compared to caramel flavor-filled samples under higher storage temperatures. In conclusion, the addition of coffee flavor microcapsules to coffee-containing milk beverages effectively extended the retention of the coffee flavor during the storage period.

• 한국식품과학회지
• /
• 제31권6호
• /
• pp.1563-1569
• /
• 1999

본 연구는 분무건조를 이용한 향기성분의 미세캡슐화를 위해 maltodextrin(MD), gum arabic(GA),alkenylsuccinated modified starch(MS), gellan gum을 피복물질로 사용하여 배합비율을 최적화하는데 목표를 갖고 수행되었다. 핵물질은 특성이 다른 5종류의 향기성분을 채종유와 1 : 4의 비율로 혼합한 flavor model system으로 사용하였다. 예비실험을 통해 핵물질 : 피복물질의 비율을 1 : 4로 하였으며, MD함량은 30%로 고정하였다. GA : MS를 $2\;:\;8{\sim}8\;:\;2$의 비율로 제조하여 유화액에서의 특성을 분석한 결과, GA : MS = 4 : 6에서 유화안정성이 우수하였으며, flavor release가 가장 적었다 이 비율에 gellan gum을 $1{\sim}5%$ 첨가하여 실험한 결과, 4% 첨가한 것이 결과가 가장 우수하였다. 이상의 결과로 MD : GA : MS : gellan gum = 30 : 26.4 : 37.6 : 4의 배합비율이 분무건조를 이용한 향기성분의 미세캡슐화를 위한 피복물질의 최적 배합조건이었다.

• 한국식품과학회지
• /
• 제38권6호
• /
• pp.738-741
• /
• 2006

본 실험에서는 시판중인 우유 4종을 대상으로 static headspace, purge and trap 및 SPME의 세 가지 향기성분 추출방법을 이용하여, GC/MS로 각각의 향기성분을 분석하였다. Purge and trap법을 이용한 분석법으로 가장 많은 종류의 성분을 분석할 수 있었으며, 향기성분의 추출효율이 가장 좋았다. SPME법은 간단한 장비로 신속하게 향기성분을 포집할 수 있는 장점이 있으며, 추출 효율 또한 뛰어나 효율적인 향기성분 분석방법으로 이용이 가능하였다. 4종의 시판우유 중에서 검출된 향기성분은 대체적으로 큰 차이를 나타내지 않았으나, 다소의 양적차이를 나타내었다. 검출 된 성분은 주로 acetone, 2-butanone, 2-pentanone, 2-heptanone, 2-nonanone 등의 케톤류, pentanal, 2-methylbutanal, hexanal, benzaldehyde 등의 알데하이류 및 dimethyl sulfide 등의 황화합물류로써, 우유의 주요 이취성분들이었다.

• Food Science and Biotechnology
• /
• 제17권3호
• /
• pp.534-539
• /
• 2008

This study investigated the effects of pretreatment and storage conditions on the properties of stored chestnuts. Effects on chestnuts of refrigerated storage (RNT) and frozen storage (FNT) with no pretreatment, frozen storage after oxalic acid treatment without blanching (FON) and with blanching (FOB) were examined. Water binding capacity, swelling power, solubility, and viscosity of the starch produced from RNT, FNT, and FON were similar to those of the starch produced from control (CON). FOB showed significant differences in these properties from CON. Textural properties of starch gels prepared from stored chestnuts except FOB also were very similar to those of CON starch gels. The sensory characteristics of steamed FON and FNT were similar to those of steamed CON except in brown color and hardness. Steamed FNT tended to have higher brown color and lower hardness than steamed FON. Steamed RNT showed significant differences in all the sensory properties except in hardness and cooked chestnut flavor. Steamed FOB was significantly higher than steamed CON in water release and off-flavor. Among the storage conditions examined, frozen storage with oxalic acid treatment is recommended for the long-term storage of chestnuts.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권9호
• /
• pp.1347-1353
• /
• 2006

Effects of microencapsulated chitooligosaccharide addition in milk were evaluated by determination of the efficiency of microencapsulation, cholesterol removal, color, viscosity and sensory properties. Coating material was polyglycerol monostearate (PGMS) and the efficiency of microencapsulation was 88.08% at a 10:1 ratio of coating to core materials (w/w). When 0.5% of microencapsulated chitooligosaccharide was added into milk, the color values (L, a, and b) and viscosity were significantly different from those of noncapsulated chitooligosaccharide-added groups (p<0.05). The release of chitooligosaccharide from microcapsules was 7.6% in milk at $4^{\circ}C$ for 15-day storage. In both 0.5 and 1.5% microencapsulation addition, the scores of all sensory characteristics except for off-flavor were significantly different between encapsulated chitooligosaccharide and noncapsulated chitooligosaccharide-added groups during all periods of storage. The present study indicated that chitooligosaccharide microcapsules could be applicable into commercial milk with little adverse effects on physical and sensory properties.

• 식품과학과 산업
• /
• 제49권2호
• /
• pp.18-24
• /
• 2016

Sodium chloride (NaCl) is a very important as one of major food ingredients in food industries. Recently, as the potential risk of adult diseases such as hypertension by overingestion of sodium, health authorities of many countries are executing policies for the reduction of sodium to suppress the overingestion of sodium by intake of NaCl. As general ways, the replacement of NaCl with either alternative salts, such as solar salts and minerals, for examples calcium, magnesium, potassium, lactic acid, and so on, and the addition of flavor enhancers were used to reduce the contents of sodium in foods. Recently, controls of particle size of sodium chloride or release point are emerging as new salt-manufacturing technologies for the sodium reduction. Upon reducing NaCl in foods it is important to develop practically adaptable technologies on the basis of the consideration of the unique functions of NaCl in foods, in particular effects on rheological characters, function as a humectant, shorten shelf life time, and so on.

• 한국식품영양과학회지
• /
• 제39권2호
• /
• pp.287-293
• /
• 2010

소맥분에 백합 구근분말을 첨가한 물리적 특성은 백합 구근분말 첨가 비율이 증가할수록 farinogram에서 탄력도는 증가하는 경향이었으나, 점탄성, 흡수율, 흡수 시간 및 안정도는 3%이상 첨가 시 증가 후 감소하는 경향을 보였다. Rapid viscoanalyzer(RVA)에서 유지 강도, 최종점도, breakdown, setback 값, alveogram의 $P_{max}$값과 falling number 값은 감소하였다. 소맥분에 백합 구근의 첨가량과 입도 차에 의한 호화도 특성에서 초기 호화온도는 일반 분쇄 및 미분쇄($10\;{\mu}m$) 백합 구근분말의 종류와 양에 관계없이 영향을 미치지 않았다. Rheofermentometer로 측정한 gaseous release는 전체 $CO_2$ 가스 발생량과 보유량이 감소하였다. 기호도 검사에서는 백합 구근분말의 입도와 첨가 비율에 따른 식빵의 가공적성에서 식감, 향미, 맛에서 유의적인 차이가 나타났으며, 촉감과 크럼 색상은 유의적인 차이가 없는 것으로 나타났다. 한편 식빵의 가공 적성에서 일반 분쇄 3%와 초미분쇄 3% 첨가군이 양호하였으나, 종합적인 평가에서는 대조구 다음으로 미분쇄 백합 구근분말 3% 첨가군에서 우수하였다. 이미 백합 구근의 항산화 활성 등 생리활성은 검증되어져 발표되어 있는 만큼 제빵 가공에서 조직감의 문제를 보완하고 개선한다면 건강 기능성 제빵으로 상품화 가치가 있다고 생각된다.