• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1660-1668
• /
• 2017

The flow of liquids submerged with nanoparticles is of significance to industrial applications, specifically in nuclear reactors and the cooling of nuclear systems to improve energy efficiency. The application of nanofluids in water-cooled nuclear systems can result in a significant improvement of their economic performance and/or safety margins. Therefore, in this paper, Marangoni thermal convective boundary layer dusty nanoliquid flow across a flat surface in the presence of solar radiation is studied. A two phase dusty liquid model is considered. Unlike classical temperature-dependent heat source effects, an exponential space-dependent heat source aspect is considered. Stretching variables are utilized to transform the prevailing partial differential system into a nonlinear ordinary differential system, which is then solved numerically via the Runge-Kutta-Fehlberg approach coupled with a shooting technique. The roles of physical parameters are focused in momentum and heat transport distributions. Graphical illustrations are also used to consider local and average Nusselt numbers. We examined the results under both linear and quadratic variation of the surface temperature. Our simulations established that the impact of Marangoni flow is useful for an enhancement of the heat transfer rate.

• 한국컴퓨터정보학회논문지
• /
• 제11권2호
• /
• pp.201-211
• /
• 2006

현재 이동통신 시장이 급성장하고 있으며 무선통신 환경에서의 다양한 멀티미디어 서비스의 요구에 부합하고 한정된 주파수를 효율적으로 사용하기 위하여, 데이터 전송의 고속화가 가능하고 다중 안테나를 이용하는 3세대 이동통신 표준화가 진행되고 있다. 본 논문에서는 3세대 이동통신 표준화 기구인 3GPP에서 다루어지는 개루프 송신 다이버시티 기법 중 STTD(Space Time Transmit Diversity) 기법 및 STTD를 기본으로 확장되어진 STTD-OTD, CL-STTD 그리고 4TX-STTD 들에 대한 성능을 분석한다. 그리고 각 기법에서 수신 다이버시티를 추가한 개루프 송신 및 수신 다이버시티 기법을 제안한다. 플랫 페이딩 채널 환경하에서 이들 기법들을 적용하여 모의 수치계산을 수행하고 성능을 비교 분석한다.

• 한국통신학회논문지
• /
• 제27권7A호
• /
• pp.629-634
• /
• 2002

차세대 무선 통신 시스템은 현재의 시스템보다 고속 인터넷 접속 및 무선 이동 컴퓨팅과 같은 무선 멀티미디어 서비스를 제공할 것으로 예상된다. 사용자의 서비스 품질(QoS)에 대한 요구와 각각의 응용 프로그램에 따라, 이러한 요구를 충족시킬 만한 많은 무선 통신 시스템이 제안되고 있다. 시공간 전송 다이버시티 기법 중 하나인 시공간 블록 부호 시스템은 플랫 페이딩을 기반으로 하는 간단한 최대 우도 복호 알고리즘을 사용하기 때문에 무선 채널의 불완전성에 기인하는 심볼간 간섭에 대한 고려가 필요하다. 본 논문에서는 이러한 문제를 해결하기 위해 적응형 등화기를 이용한 시공간 전송 다이버시티 시스템을 제안한다. 제안된 시스템은 다중 접속 간섭을 유발하는 간섭을 효과적으로 제거할 수 있다. 모의 실험을 통하여 제안된 시스템이 비트 오율 성능을 개선시키는 것을 확인하였다.

• 대한전자공학회논문지TC
• /
• 제44권12호
• /
• pp.28-33
• /
• 2007

느린 페이딩 패널에서 공간-시간 트렐리스 부호화된 OFDM 시스템을 제안하고, 시간 영역에서 제안된 principal ratio combining(PRC)와 일반화된 PRE(GPRC)의 수식을 이론적으로 주파수 영역에서 새롭게 분석한다. 시간영역에서와 마찬가지로 GPRC 기법은 ML 및 PRC 기법을 분할하여 성능과 수신기 복잡도 간의 유연한 tradeoff를 활용할 수 있다. M진 PSK 변조 방식을 이용하는 컴퓨터 시뮬레이션을 통해 주파수 플랫 및 주파수 선택적 페이딩에서 성능을 검증한다. 또한 세 가지 수신 기법간의 수신기 복잡도와 시뮬레이션 시간을 비교 검토한다.

• 대한설비공학회지:설비저널
• /
• 제8권4호
• /
• pp.221-236
• /
• 1979

The three years Performance of a liquid type solar heating system has been determined for a system which has been determined for a system which has been operating continuously since 1976 in Seoul with no serious maintenance. A flat plate collector is used to transform incident solar radiation into thermal energy. This energy is stored if the form of sensible energy and used as needed to supply the space heating loads. An electric auxiliary heaters are provided to supply energy for space heating load when the energy in the storage tank is depleted. The ratio of useful collected solar heat divided by the total solar radiation on the collector was obtained about 84 per cent. It is also obtained the relation between ratio of solar collector area to the heating area and the ratio of useful collected solar energy to the heating load for the useful design data. A comparison between the measured and simulated results with the solar space heating system is described. Hour by hour simulation is made on unsteady state basis using the system parameters and meteorological data at the experiment site. The result of comparison turned out satisfactory for the solar heating system, though the simulation was formed somewhat higher than by experimental.

• 한국의상디자인학회지
• /
• 제8권3호
• /
• pp.27-34
• /
• 2006

Flexibility, love of symbols, small size-these are all qualites that accompany the proclivity towards compactness in Japanese culture. They developed and have been refined to an unusual level in Japan partly out of the necessity to use limited space economically, but these qualities also characterize the aesthetic preferences of the people. Because space is so precious, it receives a great deal of attention in every aspect of life. Over the centuries Japanese have devised innumerable ways to use space that are ingenious in their successful combination of pragmatism, harmony, and beauty. Folding, stacking, rolling, nesting, carrying, consolidating, miniaturizing and transforming are some of the techniques for living that have created the compact culture. Folding allows a one-dimensional object to be placed in prescribed small space. Stacking objects of the same shape makes use of vertical space, saving valuable horizontal space. Rolling an object reduces it to a tidy cylinder without creasing it, creating yet another form of repose for functionally flat things. Nesting several identically shaped objects of graduated sizes is known as ireko. Carrying things by hand makes them available for any occasion, by plan or on impulse. Consolidating is to bring together the multifarious systems of living into an integrated whole. Miniaturizing things is a way to bring even the universe down to the scale of a human hand. Transforming the face of things is another notable propensity in the Japanese life style. Each one is put to use in countless ways, suggesting principles and conceptions that encapsulate the wisdom of tradition. In this study I wishes to investigate the principals of Japanese traditional design and the applied case in fashion goods.

• 천문학회보
• /
• 제39권1호
• /
• pp.72.2-72.2
• /
• 2014

We have made a comparison of three cone models (an asymmetric cone model, an ice-cream cone model, and an elliptical cone model) in terms of space weather application. We found that CME angular widths obtained by three cone models are quite different one another even though their radial velocities are comparable with one another. In this study, we investigate which cone model is proper for halo CME morphology and whether cone model parameters are similar to observations. For this, we look for CMEs which are identified as halo CMEs by one spacecraft and as limb CMEs by the other ones. For this we use SOHO/LASCO and STEREO/SECCHI data during the period from 2010 December to 2011 June when two spacecraft were separated by $90{\pm}10$ degrees. From geometrical parameters of these CMEs such as their front curvature, we classify them into two groups: shallow cone (5 events) and near full-cone (28 events). Noting that the previous cone models are based on flat cone or shallow cone shapes, our results imply that a cone model based on full cone shape should be developed. For further analysis, we are estimating the angular widths of these CMEs near the limb to compare them with those from the cone models. This result shows that the angular widths of the ice-cream cone model are well correlated (CC = 0.81) with those of observations.

• 대한건축학회논문집:계획계
• /
• 제33권12호
• /
• pp.105-112
• /
• 2017

Through various media, damage of both smoking and second-hand smoking has been recognized, and brought global scale of interest in antismoking. In Korea, government has tightened regulations of smoking in non-smoking zone since December, 1980, and after National Health Promotion Act in 1995, non-smoking zone has been gradually expanded. On the other hand, there were law suits to find those regulation towards smokers are either unconstitutional or not for 4 times. In this current state, people need smoking area to prevent second-hand smoking and to consider smokers in multi-unit dwelling. Main purpose of this research is to plan smoking spaces based on various typology of multi-dwelling plan for protection of both smokers and non-smokers' right. The research group collected and analyzed the smoking behaviors in various multi-unit dwelling types such as flat type, tower type, hybrid type and others. Based on those data, the group found three phenomena. First, there are internal regulations in multi-unit dwelling to make non-smoking zone based on National Health Promotion Act and resident representative meeting decision. Second, main smoking activities are occurring at major traffic line and entrances. Third, smoking inside of multi-unit dwelling complex causes second-hand smoking to residents live in $1^{st}$ floor and when they enter. Therefore, one can achieve both smokers' and non-smokers' protection of right by creating a designated smoking space near main entrances of multi-unit dwelling complex to consider smokers' and prevents second-hand smoking by using shaft space, which is in core space, to ventilate tobacco smoke through roof.

• 한국실내디자인학회논문집
• /
• 제22권3호
• /
• pp.11-21
• /
• 2013

Senior centers in apartment complex have been provided since 1980 according to the Housing Act in Korea. Nowadays these senior centers are model leisure facility for the elderly. However there are no specific guidelines for space composition and usage in a senior center. This study examines the space composition and usage patterns of 16 senior centers in apartment complex, Jangyou New Town. The data were collected by means of an observation, measuring, and interviews. The results are ; 1) A senior center consisted of one living room and two rooms for men and women would be appropriate; A living room is for common activities and two rooms for casual resting of each gender. 2) A kitchen is mainly used for setting the table or making tea. Thus, the living-dining-kitchen type would be appropriate. 3) Many rest rooms are located outside of a senior center and unisex one. The restroom should be separated by gender and located within the senior center. Also, the width of all doors should be more than 80cm and the floor be flat. The grab bars should be installed near the fixtures in a restroom. 4) Design and location of the shoe shelf are not convenient for the elderly to use. It should be designed and arranged for the elderly to use conveniently. Also, space for canes, walkers or wheelchairs should be considered in entrance area.

• 핵의학기술
• /
• 제17권2호
• /
• pp.15-24
• /
• 2013

SPECT/CT의 수요가 늘면서 CT에 따른 복합적 진단정보에 대한 관심이 대두되고 있으며, 그 잠재적 성능가치에 대한 연구가 다양하게 진행 중이다. 하지만 그에 따른 CT 피폭 저감에 대한 연구는 미비한 실정이다. 그러므로 본 연구에서는 상 하지(extremity) 뼈 SPECT/CT 검사 시 평판형(flat-panel) CT에서의 피폭저감 영향에 대해 고찰하는데 목적을 두었다. 상 하지 뼈 SPECT/CT 검사 시 평판형과 나선형(helical) CT 간의 선량 조건에 따른 영상의 질, 피폭선량 비교를 위해 BrightView XCT (Philips Healthcare, Cleveland, USA)와 Briliance 16 CT (Philips, Healthcare, Cleveland, USA)를 적용하였다. AAPM CT phantom을 대상으로 노이즈(noise), 공간 분해능(spatial resolution)을 평가하였으며, 촬영 조건은 관전압 120 kVp로 고정하고, 관전류량(mAs)는 평판형 CT의 상 하지용 촬영 조건인 20, 30, 40, 50, 60, 70, 80 mA를 기준으로 산출된 mAs를 두 장비에 동일 적용하였다. 각 조건별 동일 촬영거리 내에서 DLP (dose-length product)값을 산출하였다. 또한 CT의 조건변화에 따라 SPECT 영상에 미치는 영향을 확인하기 위해 NEMA IEC body phantom으로 영상을 획득하고 %contrast를 확인하였다. 산출된 정보는 SPSS ver.18로 기술통계 분석 하였다. AAPM phantom에서는 mAs의 증가에 따라 노이즈는 감소하였고, 평판형 CT가 나선형 CT보다 노이즈가 낮았으며, 그 차이는 저선량의 조건일수록 증가하였다. 분해능 평가에서 두 장비 모두 0.75 mm까지 육안으로 식별 가능하였고, 평판형 CT의 경우 선량조건(mA)의 증가에 따라 DLP값이 54-216 mGy cm까지 증가하였으며, 나선형 CT의 경우 177-709 mGy cm로 증가하였다. NEMA IEC body phantom에서는 CT 촬영 조건 변화에 따른 동일한 크기의 구(sphere)에서 측정한 결과 %contrast는 일정한 값을 유지하였다. 동일한 조건을 적용한 평판형과 나선형 CT 간의 선량 조건 변화에 따른 영상의 질은 큰 차이를 보이지 않았으며, 충분한 피폭저감의 효과를 얻을 수 있었다. 또한 SPECT 영상의 %contrast 분석을 통해 영상의 질이 유지되는 것을 확인하였다. 그러므로 촬영범위가 넓지 않고 고분해능을 요구하는 상 하지 뼈 SPECT/CT 검사에서 평판형 CT를 적용하는 것이, 나선형 CT에 비해 낮은 선량조건을 적용함에도 불구하고 유사한 영상의 질을 기대할 수 있다. 또한 이를 통해 실제 임상에서 불필요한 피폭선량 저감에 도움이 되리라 사료된다.