• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.257-265
• /
• 2009

본 논문에서는 2차유동손실을 일으키는 주요 요인 중의 하나인 말굽와류의 강도를 감쇄시키기 위해 일반적인 날개 앞전의 형상을 결정하는 변수를 정하고 이를 최적화 하였다. 근사최적설계 기법을 이용최적화를 수행하였다. 유동해석과 최적화 프로그램으로는 $FLUENT^{TM}$과 $iSIGHT^{TM}$를 이용하였다. 최적화 수행결과, 기준 모델의 경우보다 전압력 계수가 약 9.79% 감소하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.139-143
• /
• 2001

Ring-stiffened cylinders are widely used as the pressure hull of submarines and underwater vehicles. For large ring-stiffened cylinders cylindrical shells are fbricated by cold rolling of flat plates and then welding of curved shells. After forming cylinders ring-stiffeners are welded on th the cylinders. Due to these cold roiling and welding initial shape imperfections and residual stresses exists in fabricated ring-stiffened cylinders. It is well known that the initial shape and material imperfections affect the ultimate strength of ring-stiffened cylinders significantly. In this paper previous researches on the effects of initial shape imperfections and residual stresses are briefly reviewed Recently a numerical analysis computer program was developed to predict the ultimate strength of ring-stiffened cylinders subjected to hydrostatic pressure, which is based on the Dynamic Relaxation technique. This program was employed to numerically investigate those effects. The numerical predictions were substantiated with relevant experimental results.

• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.28-35
• /
• 2014

A composite honeycomb core is widely used for lightweight aircraft materials. However, the composite honeycomb core coupled with metal-cutting machining processes does not make a very good match. This paper describes an experimental study of the shape-machining characteristics of a composite honeycomb core, in which a five-axis gantry machine is used. The experimental conditions of the offset allowance, tooling condition and feed rate were applied. The shape machining characteristics of a flat surface, a vertical surface, and a concave surface are evaluated by comparing the machining shape and burr characteristics.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.94-100
• /
• 2005

This paper describes the changes of Shinkansen vehicles' nose shape by increasing train speed and according to the stream of time. As the speed increases, the length of the nose trends to lengthen longer. But the nose length does not increase as speed improves by optimized nose shape to reduce aerodynamic drag and micro-pressure wave in tunnels. Shinkansen vehicles nose shape can be classified into Advanced paraboloid type, Sharp-nosed type, Organic double-edged type and Flat-nosed type. In addition, it trends to be diversified and characterized more and more. In the near future, nose designs will be emphasized by the design concept including identity of each JR company based on optimized aerodynamic shape.

• 복식문화연구
• /
• 제15권2호
• /
• pp.252-264
• /
• 2007

The purpose of this study was to compare two analytical methods classifying foot shape. The methods compared were cluster analysis method and foot index analysis method. This study defined the women's foot shape by these methods. 39 foot measurements which were automatically collected using the three dimensional foot scanner were analyzed. 203 Korean women in age 20s were participated in the anthropometric survey. Their foot shapes were classified into 5 foot types by cluster analysis: short & slim shape, flat shape, short & slender shape with slightly distorted toe, long and big shape, and short & wide shape. The foot measurements were also analyzed by the ratio of foot width and length. Five foot types that were classified by cluster analysis and three foot types that were classified by the foot index were compared. The comparison shows that cluster analysis precisely defined foot shapes. It was suggested that made-to-measure shoes making industry may adopt the foot shape analysis method utilizing cluster analysis.

• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.129-136
• /
• 2019

The purpose of this study was to provide basic data necessary for the development of clothing that can improve the satisfaction of body shape of elderly men by examining subjective characteristics and characteristics of perception type of older men's body shape. Using the Q methodology, I investigated and analyzed the process of formation and main characteristics of subjectivity of various types of recognition that elderly men express about their body shape. There were four types of perception of body shape in elderly men: flat hip and bird legs skinny body, back bent and abdominal obese body, thick neck and upper body development body, forward cervical neck and protruding abdomen obese body. The actual body shape of elderly men was classified according to the bust, waist circumference, hip circumference, and body part angle. But recognition body shape of elderly men was classified by visual factors like the abdomen, the angle of the neck, the inclination of the back, the slope of the waist, and the degree of obesity. It is necessary to consider the trend of silver fashion which is increasing in demand. In addition, it is necessary to develop clothing patterns of comfortable fit through ergonomic study on the physical characteristics of older men. Consideration should be given to the design and pattern that can reduce the difference between the ideal body shape and the body shape recognized by older men.

• 반도체디스플레이기술학회지
• /
• 제11권4호
• /
• pp.43-48
• /
• 2012

The screen printing method is much used in the flat panel display field including the LCD, PDP, FED, organic EL, and etc. for forming the high precision micro-pattern. Also A number of studies of screen printing method has been conducted as the method for the cost down through the improvement of productivity. Because of being the dot printing method of the cylindrical shape not being the line printing method like the existing PDP barrier rib and phosphor, the pillar arrays using the screen printing method is deposited in the hemispherical type not being cylindrical shape in the existing printing process conditions. In this paper, the parameters were set on the screen printing device in order to deposit the cross-sectional shape with the cone or trapezoid shape of the pillar in depositing the pillars used the screen printing device for vacuum glazing. The cross-sectional shape slope of the pillar according to the parameters was measured. And analysis the effect of the screen printing process conditions on the cross-sectional shape slope of pillars based upon the result of being measured. The processing conditions were drawn to minimize the cross-sectional shape slope of pillar.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.199-210
• /
• 1998

The skill that utilizes atomization of the liquid has been widely used in the field of industry and engineering. Though there are dozens of methods to make atomization, the pressure type injection nozzle is frequently used in washing of parts, pastourization and painting because it has relatively simple system. This study is to reveal the characteristics of atomizing formed by three different types of the pressure type injection nozzle. We measured velocity and diameter of droplet to compare and analyze characteristic of each nozzle. In case of velocity, atomization of hollow-cone nozzle is irregular than others and change of radial direction is especially large. Atomization of flat nozzle is nearly uniform. In case of diameter, atomization of hollow-cone nozzle is increased rapidly, as measurement point become more distant from the center of nozzle. Atomization of flat nozzle has the most fixed magnitude. Accordingly, full-cone nozzle can be used irrespective of the form of subject and hollow-cone nozzle is proper to the occasion to spray large and smooth subject. Also, flat nozzle is proper to the occasion to spray a part of subject and long groove.

• 마이크로전자및패키징학회지
• /
• 제14권2호
• /
• pp.1-8
• /
• 2007

LCD(Liquid Crystal Display) TV(Television) 용 백라이트의 광원으로서 면광원을 개발하였으며 이를 이용한 백라이트를 개발하였다. 백라이트의 광원으로 사용된 면광원은 유리성형을 통하여 채널을 형성하였으며 채널의 모양이 타원형 구조, 높이 4.4 mm, 채널의 실링 부위를 1.4 mm로 최적화된 면광원을 이용하여 제작한 백라이트의 성능을 향상시킬 수 있었다. 본 논문에서는 특히 면광원의 채널구조에 따른 백라이트의 휘도균일도의 변화에 대하여 연구하였으며 특히 광학 시뮬레이션을 통하여 면광원의 채널형상을 최적화 하였다. 채널의 구조가 최적화된 면광원을 이용하여 제작된 32", LCD TV의 휘도는 $576\;cd/m^2$ 이었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.91-94
• /
• 2005

With increasing demands for large-scale micro-optical components in the field of digital display, the establishment of large-scale fabrication technology fur polymeric patterns has become a priority. The starting point of any polymer replication process is the mold, and the mold often has flat surface. However, It is very hard to replicate large-scale micro patterns using the flat mold, because the cost of large-scale flat mold was very high, and some uniformity and releasing problems were often occurred in large scale flat molding process. In this study, a UV roll imprinting system to overcome the financial and fabrication issues of large-scale pattern replication process was designed and constructed. As a practical example of the system, a lenticular lens with radius of curvature of $223{\mu}m$ and pitch of $280{\mu}m$, which was used to provide wide viewing angle in projection TV, was designed and fabricated. The roll stamper was fabricated using direct machining process of aluminum roll base. Finally, the shape accuracy and uniformity of roll imprinted lenticular lens sheet were measured and analyzed.