• 한국전자파학회논문지
• /
• 제19권11호
• /
• pp.1213-1222
• /
• 2008

본 논문에서는 지능형 안테나 시스템을 위하여 IBBD 배열 안테나의 소자 간격 및 소자 사이에 삽입된 평판의 높이에 따른 격리도를 분석하였다. 배열 소자 사이의 격리도는 두 소자 사이의 배열 간격이 증가할수록 향상되고, 두 소자 사이에 평판을 삽입한 경우가 평판이 없는 경우보다 약 13 dB의 격리도가 향상되는 것을 확인하였다. 또, 평판이 삽입된 $4{\times}4$ 소자 IBBD 배열 안테나를 제작하여 평판의 높이에 따른 복사 특성을 측정하고 분석하였다. 평판의 높이가 증가함에 따라 이득이 약간 감소하나, 복사 패턴 형상에는 거의 변화가 없었다.

• 대한치과보철학회지
• /
• 제43권6호
• /
• pp.727-735
• /
• 2005

Statement of problem. Platform switching in implant prosthesis has been used for esthetic and biological purpose. But there are few reports for this concept. Purpose. The purpose of this study is evaluation of platform switching in wide implant by three dimensional finite element analysis. Materials and Methods. The single implant and prosthesis was modeled in accordance with the geometric designs for Osstem implant system. Three-dimensional finite element models were developed for (1) a wide diameter 3i type titanium implant 5 mm in diameter, 13 mm in length with wide cemented abutment, titanium alloy abutment screw, and prosthesis (2) a wide diameter 3i type titanium implant 5 mm in diameter, 13 mm in length with regular cemented abutment, titanium alloy abutment screw and prosthesis(platform switching) was made for finite element analysis. The abutment screws were subjected to a tightening torque of 30 Ncm. The amount of preload was hypothesized to 650N, and round and flat type prostheses were loaded to 200 N. Four loading offset point (0, 2, 4, 6 mm from the center of the implants) were evaluated. Models were processed by the software programs HyperMesh and ANSA. The PAM-CRASH 2G simulation software was used for analysis of stress. The PAM-VIEW and HyperView were used for post processing. Results. The results from experiment were as follows; 1. von Mises stress value is increased in order of bone, abutment, implant and abutment screw. 2. von Mises stress of abutment screw is lower when platform switching. 3. von Mises stress of implant is lower when platform switching until loading offset 4 mm. 4. von Mises stress of abutment is similar between each other. 5. von Mises stress of bone is slightly higher when platform switching. Conclusion. The von Mises stress pattern of implant components is favor when platform switch ing but slightly higher in bone stress distribution than use of wide abutment. The research about stress distribution is essential for investigation of the cortical bone loss.

• 한국지역사회생활과학회지
• /
• 제15권3호
• /
• pp.21-28
• /
• 2004

Marketing of traditional doenjang (a kind of fermented soybean product) is now focusing on its health advantages, being proven to have anti-viral, anti-cancer and anti-oxidant effects. The purpose of this study is to investigate the consumption patterns of traditional doenjang in the households managed by different generations of women living in Gyeonggi area. Six hundred housewives answered the questionnaire. Statistical analyses were performed on 590 subjects using SAS (ver 8.1). Chi-square tests and General Linear Models were used. The age distribution of housewives was as follows: 42.9% were in their 30s; 40.9% were in their 40s; and 16.2% were in their 50s. 57.5% of subjects graduated with high school education while 72.8% of subjects did housework only. Overall, 47.2%, prepared their doenjang themselves, while the remainder purchased it or received it from relatives. This percentage differed however according to age group, as self-preparation of doenjang was found in only 22% of housewives in their 30s, but increased to 83% of subjects in their 50s. 53.4% of subjects had their doenjang donated to them by relatives, compared with only 3.1 % of subjects in their 50s. Most of dishes using doenjang were soups and stews. Those housewives in their 50s made significantly higher use of doenjang in soup, wrapping vegetables (ssamjang), seasoning, and flat cake (jangttok). Doenjang dishes were prepared for the husband in the family 59.2% of the time, followed by housewives 15.4% of the time. Annual consumption of doenjang was 5.1kg. and Kanjang was 4.4L per household; there was no significant difference between the age groups respecting annual consumption. From such results, we may assume a decrease in home-made doenjang among younger generations and an increase in the amount of purchased doenjang. We can predict an increased need for doenjang of better quality. Also the development of new products such as ready-to-eat or fast food variants would better serve the trend towards convenience.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.263-270
• /
• 1996

본 연구에서는 여러개의 원판형 압전소자가 부착된 판구조물의 소음제어를 다루었다. 판재의 아래에는 소음원이 위치하고 이 소음원은 판재를 가진한다. 구조물 및 압전소자는 3차원 요소, 구조물 요소 및 천이요소의 조화로 이루어지는 유한요소로 모델링 되었다. 최적화 과정의 목적함수는 구조물로부터 복사되는 소음 에너지이고 설계변수는 원판형 압전소자의 위치, 크기 및 인가되는 전압이 사용되었다. 최적설계과정에서 요구되는 자동격자형성이 언급되었다. 구조물의 공진 및 비공진 주파수에서 최적설계가 행해졌으며 괄목할 만한 소음감소를 얻었다. 이 결고는 음향 하중의 형태가 다르게 변하더라도 크게 변하지 않는 것이 밝혀졌다. 또한 한 주파수 뿐 아니라 넓은 주파수 영역에서도 압전가진기의 전압을 조정함으로써 좋은감소를 얻을 수 있다.

• 대한기계학회논문집B
• /
• 제35권7호
• /
• pp.701-708
• /
• 2011

기울어진 평판에서 발생하는 자연대류 열전달현상을 $R_{a_L}$ $1.69{\times}10^{11}$과 $7.23{\times}10^{12}$에 대하여 실험적으로 연구하였다. 유사성을 이용하여 열전달실험을 물질전달 실험으로 대체하였고 물질전달계로 전기도금계를 사용하였다. 평판의 기울기는 상향수평에서 하향수평까지 $10^{\circ}$씩 변화시켰다. 하향평판에서는 수직 벽면에 대한 자연대류 열전달 상관식에서 g 대신 g $cos{\theta}$로 대체함으로써 열전달계수를 구할 수 있다는 기존의 이론과 일치하는 결과를 얻었다. 상향평판의 경우 경계층이 벽면을 따라 발달되는 경우와 벽면으로부터 박리되는 2가지 영역으로 구분되는데 박리에 따른 열전달 증가를 확인하였다. 아울러 도금패턴을 이용하여 박리지점을 시각화하였고 박리지점에 대한 분석이 수행되었다.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.33-37
• /
• 2011

디스플레이, 광학, 에너지 분야 부품의 미세형상화, 대면적화, 저가격화 요구에 대응하기 위하여 대면적 롤금형의 미세형상 가공기술개발에 대한 필요성이 대두되고 있다. 롤금형은 기존의 평판금형에 비해서 금형의 납기가 빠르고, 대면적화에 용이하며, 연속성형이 가능하다는 장점을 갖고 있다. 본 연구는 롤금형에 미세형상을 가공할 때 발생하는 형상오차의 원인을 규명하는 것을 목적으로 하고 있으며, 가공 현장에서 개선 가능한 요소로서 롤금형의 동적밸런싱 보정방안을 제시하고 있다. 기존보다 정밀한 동적밸런싱 보정을 통하여 롤금형의 질량불평형이 최대 90%까지 감소되었고, 롤금형의 진동량이 0.044 mm/sec (RMS)에서 0.004mm/sec (RMS)로 감소하였으며, 결과적으로 미세패턴의 형상정밀도가 개선되는 것을 확인할 수 있었다.

• 한국의류학회지
• /
• 제26권6호
• /
• pp.901-910
• /
• 2002

This study is to classify somatotypes of the upper class boys in elementary school. The study is conducted through anthoropometric measurements and photometric measurements. The subjects are 320 boys in the age group of 10 to 11 years old. The following conclusions are drawn from this study. 1. The height items are increased along with age increase. The increases in the factors, which specify vertical sizes such as height and length, are a little larger than those of breadth, depth, and girth, which specify ; horizontal sizes. 2. The factor analysis on anthropometric measurements and photometric measurements reveals five somatic composition factors and those factors comprised 79.60% of total variance. 3. The torso shapes of the upper class boys in elementary school are classified into three categories. The first type is taller and heavier than the average elementary school upper class boys and has the highest rising shoulders. The shape of the back is about average and the chest is developed above average. The curvature of the lower back is gentle and lower abdomen protrudes the most of the three types. The second type is tall and slightly heavier than average and shoulders are raised a little. The shoulder blades protrude about average and the curvature of lower back is the most developed of all. The cheat is developed about average and the abdomen is a little protruding. The third type is the most common with the smallest height of the three and skinny with dropped shoulders. The chest is somewhat flat and the shoulder blades protrude about average.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.42-47
• /
• 2004

In this paper, we analyzed on the characteristics of the stranded wire disconnected by repeated stress. The stranded wires that were used in the experiment are PVC insulated flexible cords(VCTFK: Vinyl Insulated Vinyl Cabtyre Cord Flat-type) of $0.75mm^2,\;1.25mm^2,\;and\;2.0mm^2$. They are used to connect the load in low voltage. The stranded wires disconnected by repeated stress were magnified with optical microscope. Using X-ray, the disconnected wire were photo-graphed. we compared mechanical characteristics of the stranded wire between disconnected tendency and allowable current. On the mechanical strength of vinyl cap tire ellipse type cords under bending stress, VCTFK of $1.25mm^2$ was the strongest of them. When it was bent $826.3\pm7$ times, it appeared the disconnected tendency that element wires of VCTFK of $1.25mm^2$ are more about 1.67 times than element wires of VCTFK of $0.75mm^2$. In mechanical strength, VCTFK of $1.25mm^2$ is higher about 1.7 times than VCTFK of $0.75mm^2$. Therefore, we found out that mechanical strength was higher, when the wire had a lot of element wires. In comparison with bending stress, VCTFK of $1.25mm^2$ is the strongest among samples, and it is the most useful in wires of movable type.

• 한국수산과학회지
• /
• 제42권6호
• /
• pp.683-694
• /
• 2009

High-resolution (Chirp and Sparker system) seismic profiles were analyzed to investigate the sedimentary sequence and distribution pattern of the late Holocene deposits in Gyunggi Bay, the Yellow Sea. The bay is located in the western part of Korea, east of the Yellow Sea. The sedimentary sequence divided into three units bounded by erosional bounding surface: (1) acoustically parallel to subparallel reflectors with cross bedding structures (Unit 1); (2) confused inner reflectors and top of unit exposed partially at the seafloor (Unit 2); and (3) approximately parallel reflections and regressive to transgressive incision-fills (Unit 3). On the basis of seafloor morphology, surface bedforms, and subbotom acoustic characters, echo types in the study area were identified following the schemes of Chough et al. (2002); (1) flat seafloor with sharp bottom echoes (echo types 1-1, 1-2 and 1-3; transgressive sediment sheets or relict sands), (2) mounded seafloor with either smooth surface or superposed bedforms (echo types 2-1 and 2-2; tidal ridges), and (3) various-scale eroded seafloor (echo types 3-1 and 3-2; channels). Suspect features of acoustic turbid zones which is related to gas charged sediment are reported.

• 한국경영과학회지
• /
• 제36권4호
• /
• pp.43-61
• /
• 2011

We first develop a value ecosystem framework to model the SDP(Service Delivery Process) of web services. Since the web service has been evolving from the basic web architecture (e.g., traditional world wide web) to a prosuming platform based on virtualization technologies, the proposed framework of the value ecosystem focuses on capturing the key characteristics of SDP in each type of web services. Even though they share the basic elements such as PP(Platform Provider), CA(Customization Agency) and user group, the SDP in the traditional web services (so-called Web1.0 in this paper) is quite different from the most recent one (so-called Web2.0). In our value ecosystem, users are uniformly distributed over (0, ${\Delta}$), where ${\Delta}$��represents the variety level of users' preference on the web service level. PP and CA provide a standard level of web service(s) and prosuming service package, respectively. CA in Web1.0 presents a standard customization package($s_a$) at flat rate c, whereas PP and CA collaborate and provide customization service with a usage-based scheme. We employ a multi-stage game model to analyze and compare the SDPs in Web1.0 and Web2.0. Our findings through analysis and numerical simulations are as follows. First, the user group is consecutively segmented, and the pattern of the segmentations varies across Web1.0 and Web2.0. The standardized service level s (from PP) is higher in Web1.0, whereas the amount of information created in the value ecosystem is bigger in Web2.0. This indicates the role of CA would be increasingly critical in Web2.0: in particular, for fulfilling the needs of prosuming and service customization.