• 한국의류학회지
• /
• 제31권5호
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• 한국의류학회지
• /
• 제15권3호
• /
• pp.309-320
• /
• 1991

The purpose of this study was to develope a pattern drafting method for various somatotype which contribute largely to increase the fitness and comfort of garments. This study had 8 subjects who were college girls who had prominent somatic characteristics. The study was carried out by the following procedures. 1. The 8 subjects who had prominent somatic characteristics were cheesed by photograph- ing. The somatotypes of 8 subjects were classified into Standard somatotype, Turning over somatotype, Bending somatotype and Turning over-Bending somatotype. 2. Under the criterion of the body surface development, the comparative investigation on the pattern and the sensory evaluation were accomplished in the flat pattern method and the draping pattern method. 3. The body surface development of them were made by the draping pattern method. 4. In the result of the comparative investigation and the sensory evaluation, it was found that the flat pattern had better appearance and comfort than the draping pattern, and the draping pattern included more somatic characteristics than the flat pattern. 5. On the basis of those result, the pattern drafting method according to the somatotype was indicated and it was examinated by the clothing experiment. 6. The sensory evaluation for appearance and comfort was applied to evaluate the new basic pattern for four somatotype by comparing it with the conventional basic pattern (Rim, won ja' 5). The result of the sensory evaluation, it was found that the new basic pattern was more suitable for each somatotype than the conventional basic pattern.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1849-1858
• /
• 2004

For examining friction-factor characteristics of round-hole pattern surfaces which are usually applied on damper seals, flat plate test apparatus is designed and fabricated. The measurement method of leakage and pressure distribution along round-hole pattern specimen with different hole area is described and a method for determining the Fanning friction factor is discussed. Results show that the round-hole pattern surfaces provide a much larger friction factor than smooth surface, and the friction factor vs. clearance behavior yields that the friction factor generally decreases as the clearance increases unlike the results of Nava's flat plate test. As the hole depth is decreased, the friction factor is increased, and maximum friction factor is obtained for 50% of hole area. Since the present experimental friction factor results show coincident characteristics with Moody's friction factor model, empirical friction factors for round-hole pattern surfaces are obtained by using the Moody's formula based on curve-fit of the experimental data. Results of Villasmil's 2D CFD simulation support the present experimental test result.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제10권1호
• /
• pp.57-65
• /
• 2004

서로 다른 형태와 크기를 가지는 탐색패턴과 움직임 벡터의 분포는 블록 정합 알고리즘에서 탐색 속도와 화질을 좌우하는 중요한 요소이다. 본 논문에서는 단위 다이아몬드패턴과 납작한 육각패턴을 이용한 새로운 고속 블록 정합 알고리즘을 제안한다. 이 알고리즘은 단위 다이아몬드패턴을 이용하여 적은 탐색점으로 움직임이 적은 벡터를 우선 찾은 다음에 움직임이 큰 벡터에 대해서는 납작한 육각패턴을 이용하여 고속으로 움직임 벡터를 찾게 하였다. 실험결과, 제안된 알고리즘은 육각패턴 탐색 알고리즘에 비하여 움직임 벡터 예측의 속도에 있어서 약 11∼51%의 높은 성능 향상을 보였으며 화질 또한 PSNR 기준으로 약 0.05∼0.74㏈의 향상을 보였다.

• 패션비즈니스
• /
• 제11권3호
• /
• pp.35-45
• /
• 2007

This study examined how to create 2D basic pattern of individuals by means of 3-D body figure, which is to develop a flat of individual basic pattern directly from the 3-D body scan data of each subject using that of the upper body of a male adult. In terms of methodology, this study adopted 3D body scan data on system and body to make examinations in the following steps: 1. Standard point and line were set on human body, along with 3-D definition points(feature points). 2. PB was created by modifying horizontal and longitudinal section of scan data. 3. Ways to set reserve were established in the findings of PB planar development. Respective developed flat patterns were compared with pattern findings in previous studies by means of sensory evaluation. As a result, it was found that both system and body model are basic pattern and belong to appropriate pattern as semi-tight-fit basic pattern with overall appropriate tolerances. Thus, this study came to a conclusion that it is feasible and valid to develop theories for flat development as considered herein.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.151-152
• /
• 2010

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.367-370
• /
• 2005

In this paper, we made a Singly Fed patch which is the fittest at the feeding part. And we found out return loss and radiation pattern about dielectric rod array antenna which has six's passive element to shape FTEP(Flat-topped element pattern) after we analyzed the characters of singly dielectric rod antenna. We show the conclusion that has the optimum return loss and more flat radiation pattern.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1357-1361
• /
• 2016

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.399-403
• /
• 2004

대학에서 의류학과 교육은 그 목적에 따라 다양하나 의복구성은 의복제작과정을 이해하는데 필요한 것으로 의복디자인분야 부터 품질관리에 이르기까지 기본과목으로 되어있다. 의복제작은 인체의 이해에 따른 기본원형의 설계로 시작된다. 기본원형은 활용이 다양하여 모든 종목의 의복 패턴 제작이 가능해야 한다. 또한 각 인체 치수에 맞는 사이즈를 등급화하여 초보자라도 누구나 활용할 수 있는 기본원형을 설계하는 것이 필요하다. 따라서 본 연구는 20대 초반의 대학생을 대상으로 입체재단 방법에 의한 기본원형을 제작하여 등급별로 표준화된 치수를 산출하고 연구된 평면재단 방법에 의한 길의 기본원형을 비교 검정하여 적합성을 비교하였다. 석고법에 의하여 제작된 인체모형에서 드레이핑된 기본원형과 연구된 평면재단 방법에 의한 기본원형을 비교 검정한 결과 5단계로 치수를 등급화 하였다. 착장평가 결과 다양한 체형에 만족힌 결과를 얻어 의복구성을 시작하는 초보자들에게 활용하여 교육할 수 있으리라 기대한다.

• 한국전자파학회논문지
• /
• 제18권3호
• /
• pp.323-333
• /
• 2007

본 논문에서는 구형 빔 패턴을 효율적으로 형성하기 위한 새로운 MDAS-DR 안테나 구조를 제안하였다. 안테나 구조는 크게 스택 마이크로스트립 패치 여기 소자, 다층 원형 도체 배열 소자들과 그 주위를 에워싸고 있는 유전체 링으로 구성된다. 다층 원형 도체 배열 구조는 스택 마이크로스트립 패치 여기 소자에 의해 방사 전력을 공급 받아 그 주변의 유전체 링과의 전기적 상호 결합 작용에 의해 원거리에서 구형 빔 방사 패턴을 형성할 수 있다. 유전체 링 구조의 설계 변수는 다층 원형 도체 배열 구조의 설계 변수와 더불어 구형 빔 패턴 형성에 중요한 설계 변수들로서 구형 빔 안테나를 위해 12개의 다층 원형 도체 배열과 유전율이 2.05인 테프론 유전체가 사용되었다. 제안된 안테나 구조의 유효성을 검증하기 위하여 10 GHz 대역$(9.6\sim10.4\;GHz)$에서 동작하는 안테 나를 설계하였으며, 시뮬레이션에는 삼차원 안테나 구조 해석에 적합한 상용 CST Microwave $Studio^{TM}$ 시뮬레이터가 사용되었다. 또한, 안테나 시제품을 제작한 후 무반사실 안테나 챔버에서 전기적 특성들을 측정하였다. 구형 빔 패턴 형성을 갖는 안테나 시제품의 측정 결과들은 시뮬레이션 결과들과 잘 일치하였으며, 측정 결과들로부터 MDAS-DR 안테나의 10 GHz에서의 측정 이득은 11.18 dBi이었으며, 최소한 8.0 % 대역 폭 내에서 약 $40^{\circ}$의 양호한 구형 빔 패턴을 형성함을 확인할 수 있었다.