• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.63-64
• /
• 2011

조명용 전기 에너지의 효율적인 이용을 위해서는 사용 환경에 따라 조명 기구를 부분 조광(local dimming) 제어할 필요가 있다. 본 연구에서는 LED 면광원의 부분 디지털조광 시스템을 개발하고 부분 조광된 면광원의 발광영역 및 밝기와 조명 대상물의 조도 분포와의 관계를 측정하고 평가하였다. LED 면광원을 16개의 구역으로 나누고 FPGA와 FET 스위치를 이용하여 각 구역의 점등 및 광량을 디지털 제어하였다. 또한 실험용 암실을 만들어 암실 바닥면을 91등분하고 각 지점의 조도를 측정하여 부분 조광제어에 따른 조도 분포를 평가하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.84-87
• /
• 2003

Carbon-nitrogen (CN) nanofibers have been produced using a water cooled hot isostatic pressure (HIP) apparatus. The CN nanofibers were grown in random with the diameter of about 100-150nm and length over $10{\mu}m$. Emission properties of CN nanofibers were investigated for spacing, between anode and cathode, variation. Then turn-on fields about $1.4V/{\mu}m$. The time reliability and light emission test were carried out for above 100 hours. We suggest that CN nanofibers can be possibly applied to high brightness flat lamp because of low turn-on field and time reliability.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.11a
• /
• pp.703-710
• /
• 2000

기존의 비상구 표시등은 20-30(W) 정도의 많은 전력 소모와 2천시간 정도의 짧은 램프 수명 등으로 인해 전기에너지의 소모가 많으며, 부피가 커 시공 및 설치가 어렵다. 따라서, 본 논문에서는 도광판을 사용한 비상등의 개발에 관하여 연구하기 위하여 가시광선 투과율이 94%이상으로 높고 가공이 용이한 투명 PMMA(Poly Methyl Meth Acrylate)판에 광반사면을 광학적 시뮬레이션에 의해 설계된 V자형 홈선을 가공하여 비상등의 도광판으로 사용한다. 이 구조는 기존의 비상등에 비해 광이용 효율이 높고, 설계의 자유도가 높아질 것으로 기대된다. 또한, CCFT(Cold Cathode Fluorecent Tube) 램프, 광확산필름, 프리즘필름, 몰드프레임 등을 이용하여 광이용 효율을 극대화하는 구조를 고안하고, 인버터 구동을 위한 주변회로 시스템을 개발하여 초절전형 평판 비상등 시스템의 양산 기술을 확보함을 목적으로 한다. 이로부터 휘도 2000cd/$m^2$, 휘도균일도 90%이상의 특성과 기존의 비상등 대비 전기 에너지 50%이상이 절감 가능한 비상등이 개발될 수 있다.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1398-1400
• /
• 2002

A new PLF-BLU (Plastic Light Fiber-Back Light Unit) using side glowing light fiber rods array for the 42" LCD TV display has been evelopedd. The light fibers were 14mm in diameter and 50cm long pure transparent acrylic rods of 1.49 refractive index. Fine seratees were made on the flat side of rod. extremely bright incandscent light from lamp fed into the fiber si scattered at scratches then emerges through the surface of rod. A typical PLF-BLU system consists of 24 PLFs produced side glow of brightness of 4,500cd/㎡ to 6,500cd/㎡. New PLF-BLU is proved to be a BLU of rigid, bright, no heat generation, and low power consumption, hence a prospective BLU system for very and/or ultra large size TVs. A new LED-PLF-BLU system considered to be a revolutionary to break-through of the BLU technologies has also been developed, and is decribed briefly.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.210-212
• /
• 2018

A new switching mode has been proposed to obtain high power factor and low THD in single stage AC-DC converter. The conventional voltage mode control in critical conduction mode distorts input current shape with poor THD in flyback topology. Once TRIAC dimmer is connected, visible flicker in the LED lamp is easily detected due to a lack of TRAIC holding current near the input voltage zero cross. The newly proposed method can shape the input current by providing a desired reference voltage so that low THD is obtained by ideal sinusoidal input current in case of no dimmer connection and flat input current performs good TRIAC dimmer compatibility in phase-cut dimming condition. To confirm the validity of the proposed method, theoretical analysis and experimental result from 8W dimmable LED lighting system are presented.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2075-2078
• /
• 2005

본 논문은 무수은 평판 형광램프의 구동원리를 해석하기 위하여 주파수 변화에 따른 벽전하와 벽전압 특성이 방전특성에 미치는 영향을 연구하였다. 펄스폭 $9[{\mu}s]$, 300[ns]의 전압 상승 시간을 갖는 펄스파로 방전시켰다. 벽전하, 정전용량, 벽전압의 전기적 특성은 인가된 전압, 전류 파형으로부터 계산하였다. 이때 구동 주파수는 20[kHz]에서 40[kHz]까지 변화시키면서 방전 전후의 정전용량 및 Q-V특성 곡선을 해석하였다. 주파수가 증가하면서 전극간의 정전용량 $C_p$ 방전공간상의 정전용량 $C_o$는 변화를 보이지 않았으나 방전공간과 전극사이의 정전용량 $2C_g$는 증가하는 경향을 보였다. 또한 주파수가 증가하면서 방전개시 전압은 감소하였으며 효율은 감소하는 경향을 보였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.41.1-41.1
• /
• 2010

IGRINS (the Immersion GRating Infrared Spectrograph) is a high resolution infrared spectrograph which is being developed by a collaboration of the University of Texas, the Korea Astronomy and Space Science Institute, and Kyung Hee University. The wavelength calibration unit of IGRINS will be situated between the telescope flange and IGRINS dewar. It will include Th-Ar hallow cathode lamp, optical elements, and gas absorption cell for the case that requires precise calibration (e.g., radial velocity observation). The system will also use a tungsten halogen lamp in an integrating sphere as a blackbody source for the flat-field imaging. IGRINS will be placed initially on the McDonald 2.7m Harlan J. Smith telescope and later on 4-8m class telescopes. We present an overview of the plan for the wavelength calibration sources and of the development process for the optical and mechanical design of the IGRINS calibration system.

• Korean Journal of Materials Research
• /
• v.24 no.8
• /
• pp.429-433
• /
• 2014

As the fabrication technology used in FPDs(flat-panel displays) advances, the size of these panels is increasing and the pattern size is decreasing to the um range. Accordingly, a cleaning process during the FPD fabrication process is becoming more important to prevent yield reductions. The purpose of this study is to develop a FPD cleaning system and a cleaning process using a two-phase flow. The FPD cleaning system consists of two parts, one being a cleaning part which includes a two-phase flow nozzle, and the other being a drying part which includes an air-knife and a halogen lamp. To evaluate the particle removal efficiency by means of two-phase flow cleaning, silica particles $1.5{\mu}m$ in size were contaminated onto a six-inch silicon wafer and a four-inch glass wafer. We conducted cleaning processes under various conditions, i.e., DI water and nitrogen gas at different pressures, using a two-phase-flow nozzle with a gap distance between the nozzle and the substrate. The drying efficiency was also tested using the air-knife with a change in the gap distance between the air-knife and the substrate to remove the DI water which remained on the substrate after the two-phase-flow cleaning process. We obtained high efficiency in terms of particle removal as well as good drying efficiency through the optimized conditions of the two-phase-flow cleaning and air-knife processes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.356-364
• /
• 2020

An experimental study to investigate the effect of self-cleaning of mortar mixed with photocatalyst was performed out in this study. Test parameters included the photocatalyst content and surface roughness of the specimens. The experimental mortar specimens were manufactured by mixing a photocatalyst by cement weight of 2.5%, 5.0%, 7.5% and 10.0%. In addition, the surface roughness was categorized into three cases. They included flat surface condition, little surface roughness(medium roughness), and high surface roughness. After mortar specimens were cured for 28 days, they were illuminated by an ultraviolet lamp for 24 hours and immersed in a methylene blue conditioning solution for 12 hours. Thereafter, an ultraviolet(UV) lamp was illuminated on the specimens for 48 hours in an experimental chamber and then the color change of methylene blue solution was measured by using a spectrophotometer over illuminating time of UV lamp. The color change of methylene blue tended to increase as photocatalyst contents increased. Test results meant that photocatalyst was effective for self-cleaning in mortar. However, the color change of the methylene blue solution did not show a noticeable tendency at different surface roughness conditions. It might be due to the uneven photocatalyst distribution on the surface of mortar specimens.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1214-1218
• /
• 2006

We introduced simple fabrication process for field emission devices based on carbon nanotubes (CNTs) emitters. Instead of using the ITO material as a transparent electrode, a metal (Au) with thickness of 5-20nm was used. Moreover, the ITO patterning process was eliminated by depositing metal layer, before the CNT printing process. In addition, the thin metal layer on photo resist (PR) layer was used as UV block. We fabricated the CNT field emission arrays of triode structure with simple process. And I-V characteristics of field emission arrays were measured. The maximum current density of $254{\mu}A/cm2$ was achieved when the gate and the anode voltage was kept 150V and 3000V, respectively. The distance between anode and cathode was kept constant.