• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.218-223
• /
• 2008

Cell-phone becomes a necessary communication device in modern society. However, a paging signal by a sound transducer often acts as an unpleasant noise, thus necessitating a paging signal by a vibration motor. The conventional flat type vibration motor uses three-phase windings with three phase coils. In this article, a new design of a vibration motor using a V connection with two phase coils is presented, increasing mass productivity. For electromagnetic field analysis, due to the motor symmetry, two-dimensional modeling can be implemented for fast computation, and performance is predicted by the finite element method. The winding distribution angle turns out to be the most important design parameter for the elimination of dead points, and a new coil configuration is suggested which has no adverse effect on motor size and weight. Experimental tests of vibration confirm the validity of the proposed design.

• The Journal of Society for e-Business Studies
• /
• v.7 no.1
• /
• pp.153-166
• /
• 2002

Nowadays an information exchange on Bn such as B2B electronic commerce is spreading. Therefore the systematic and stable management mechanism for storing the exchanged information is needed. For this goal there are many research activities for connection between XML application and relational database. But because XML data have hierarchical structures and relational database can store only flat-structured data, we need to store XML data in object-relational database that support hierarchical structure. Accordingly the modeling methodology for storing XML data in object-relational database is needed. In order to build good quality application systems, modeling is an important first step. In 1997, the OMG adopted the UML as its standard modeling language. Since industry has warmly embraced UML its popularity should become more important in the future. So a design methodology based on UML is need to develop efficiently XML applications. In this paper, we propose a unified design methodology for In applications based on object-relational database using In. To this goal, first we introduce a XML modeling methodology to design W3C XML schema using UML and second we propose data modeling methodology for object-relational database schema to store efficiently XML data in object-relational databases.

• Journal of Information Technology Applications and Management
• /
• v.9 no.1
• /
• pp.85-96
• /
• 2002

Nowadays an information exchange on XML such as B2B electronic commerce is spreading. Therefore the systematic and stable management mechanism for storing the exchanged Information is needed. For this goal there are many research activities for connection between XML application and relational database. But because XML data have hierarchical structures and relational database can store only flat-structured data, we need to store XML data in object-oriented database that support hierarchical structure. Accordingly the modeling methodology for storing XML data in object-oriented database is needed. In order to build good quality application systems, modeling is an important first step. In 1997, the OMG adopted the UML as its standard modeling language. Since industry has warmly embraced UML, its popularity should become more important in the future. So a design methodology based on UML is need to develop efficiently XML applications. In this paper, we propose a unified design methodology for XML applications based on object- oriented database using UML. To this goal, first we introduce a XML modeling methodology to design W3C XML schema using UML and second we propose data modeling methodology for object-oriented database schema to store efficiently XML data in object-oriented databases.

• Journal of Sensor Science and Technology
• /
• v.19 no.6
• /
• pp.483-489
• /
• 2010

Display quality depends on panel temperatures. To compensate it, temperature sensor was integrated on the panel. The conventional temperature sensor integrated on the panel needs external reference resistor. Since the resistance of external resistor can vary according to the variation of the environment temperature, the conventional temperature sensor can make error in temperature sensing. The environmental temperatures can change by the back light unit, driving circuits or chips. In this paper, we proposed a integrated temperature sensor on display panel which does not need external reference resister. Instead of external reference resistor, we used two materials which have different temperature coefficient in resistivity. They are connected serially and the output voltage was measured at the point of connection with the applied voltage to both ends. The proposed sensor was fabricated with indium tin oxide(ITO), and Mo metal electrode temperature sensor which were connected serially. We verified the temperature senor by the measurements of sensitivity, lineality, hysteresis, repeatability, stability, and accuracy.

• Anatomy and Cell Biology
• /
• v.52 no.1
• /
• pp.38-42
• /
• 2019

This study investigated and classified the various types of moderator band (MB) in relation to the anterior papillary muscle, with the aim of providing anatomical reference information and fundamental knowledge for use when repairing the congenital defects and understanding the conduction system. The study investigated 38 formalin-fixed human hearts of both sexes obtained from donors aged 38-90 years. The MB was evident in 36 of the 38 specimens (94.7%). The morphology of the MB and its connection with the APM took various forms. The MBs that had a distinct shape were classified into three types according to their shape: cylindrical column, long and thin column, and wide and flat column. Types 2 and 3 were the most common, appearing in 15 (41.7%) and 14 (38.9%) of the 36 specimens, respectively, while type 1 was observed in seven specimens (19.4%). Type 3 was divided into subtypes based on their length. The MB usually originated from a single root (91.7%), with the remainder exhibiting double roots. The pairs of roots in the latter cases had different shapes. The originating point of the MB ranged from the supraventricular crest to the apex of the ventricle. The most-common originating point was in the middle (25 of 36 specimens, 69.4%), followed by the upper third (13.9%), the lower third (11.1%), and the top fifth (5.6%) of the interventricular septum. This study has produced fundamental anatomical and clinical information that will be useful when designing cardiac surgical procedures.

• Journal of architectural history
• /
• v.31 no.1
• /
• pp.51-60
• /
• 2022

In the 16~17th centuries, the construction of T-shaped pavilion in Gyeongsangbuk-do was centered on the families of the Goseong-Lee clan and Andong-Kwon clan, who had a lot of exchanges with each other near Andong. It can be presumed that the complex structure of the T-shaped pavilion was intended to represent the technology, economic power, and social influence of the clan. After the 18th century, construction areas spread and construction subjects were diversified, but the number of new constructions decreased. It can be seen that T-shaped pavilion was erected and used for public purposes rather than personal reasons in terms of layout or flat scale. The roof of the T-shaped pavilion is very diverse depending on the wooden structure, the height of the roof and the configuration of the apex. The T-shaped pavilion, which combines two parts, has been developed in a way that strengthens not only the appearance but also the structural bonding force. The bonding strength is strengthened through the process of "roof aligning", "roof bonding", "structure connection", and "structure integration", which shows a similar tendency to the age of actual cases.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.131-137
• /
• 2009

Ionizer is used in removal of static-electricity charge from several production processes such as flat panel display, organic EL, etc. In this paper, we introduce remote monitoring systems for ionizer which have been built to communicate with multiple ionizer and to control the power and ionizing state independently. Based on a series of tests, we verified the key functions of this controller such as unit connection, quantity of ion and electric charge, alarm, and successful communication between PC and controller. This system may be directly applicable to monitor systems for ionizer in the manufacturing processes of TFT-LCD, PDP, organic EL, and others.

• Structural Engineering and Mechanics
• /
• v.89 no.4
• /
• pp.363-374
• /
• 2024

Significant changes have been made to estimate the punching shear capacity for edge column-slab joints in the latest editions of most current codes. The revised equations account for axial forces as well as moments conveyed to columns from slabs, which have a substantial impact on the punching resistance of such joints. Many key design parameters, such as reinforcement-ratio, concrete strength, size-effect, and critical-section perimeter, were treated differently or even ignored in various code provisions. Consequently, wide ranges of predicted punching shear strength were detected by applying different code formulas. Therefore, it is essential to assess the various current Codes' design-equations. Because of the similarity in estimated outcomes, only the ACI, EC, and SNiP are used in this study to cover a wide range of estimation ranges from highly conservative to unconservative. This paper is devoted to analyzing the techniques in these code provisions, comparing the estimated punching resistance with available experimental data, and finally developing efficient models predicting the punching capacity of edge column-slab connections. 63 samples from past investigations were chosen for validation. To appropriately predict the punching shear, newly updated equations for ACI and SNiP are provided based on nonlinear regression analysis. The proposed equations'results match the experimental data quite well.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.579-589
• /
• 2003

Most beam-to-column connections are symmetrically reinforced because of the reverse action caused by earthquakes. However, in weak-earthquake regions like Korea, asymmetrically reinforced connections could be used. In particular, the connections between concrete-filled tube (CFT) column and H-shape beam could be applied using a simplified lower diaphragm. The tensile capacity or Combined Cross Diaphragm for upper reinforcing was tested using a simple tension test. Four types for lower reinforcing combined Cross, none, horizontal T-bar, and vertical plate were tested using the ANSI/AISC SSPEC 2002 loading program. Horizontal T-bar and stud bolts in vertical flat, bar transmit tensile stress from the beam's bottom flange to filled concrete. All test specimens satisfied 0.01 radian inelastic rotational requirement in ordinary moment frame of AISC seismic provision. According to the results of the parametric studies simplified lower diaphragms demonstrated outstanding strength, stiffness, and plastic deformation capacity which could lead to more sufficient seismic performance in the field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5452-5457
• /
• 2012

It is saving material cost and construction cost by replacing conventional building materials, and It has advantages for aesthetic value. In the Europe, the United States, Japan and other country research about BIPV is actively being carried out and marketability is also being infinity expanding. Arch type PV systems efficiency characteristics is different depending on PV array's directly connection, parallel connection and arches angle, but is a lack of analysis on this nowadays. When the arch type PV system design up, they consider about aesthetic value and they didn't consider about generation efficiency. In this paper, we try to improve the efficiency through optimization of arch type PV system and estimation of the efficiency parameters of the arch type PV system, such as latitude, longitude, temperature, insolation, arch angle and each kind loss from system organization. For improving Arched PV system efficiency, proposed multiple control inverter system, and using simulation tool of Arched PV system "Solar pro", flat-plate type and many arch type PV system configuration the driving characteristics were compared and analyzed.