• Fire Science and Engineering
• /
• v.21 no.3
• /
• pp.56-60
• /
• 2007

The usage of MSDS (Material Safety Data Sheet) is increased world widely for the implementation of GHS and REACH. In order to know the accuracy of the data in MSDS the flash point of n-Decanol was measured by using a Tag closed tester, a Seta-flash closed tester, a Pensky-Martens closed tester and a Cleveland open tester in Japan and Korea, respectively. The test results of flash points of n-Decanol purchased different manufacturer were compared to the data of the references and MSDS. The flash points determined in Japan were similar to those in Korea but have shown much difference from those in MSDS and literatures. It is suggested that the results of flash points determined in this research have validity and manufacturers should be more careful when they make MSDS as well as for the classification of GHS and REACH.

• Fire Science and Engineering
• /
• v.32 no.1
• /
• pp.1-6
• /
• 2018

The flash point is one of the most important parameters used to characterize the ignition and explosion hazards of liquids. Flash points were measured for several binary systems containing toluene, including {methanol+toluene}, {ethanol+toluene}, and {1-propanol+toluene}. Experiments were performed according to the standard test method using a SETA closed cup flash point tester. The measured flash points were compared with the predicted values calculated using the following $G^E$ models: Wilson, NRTL, and UNIQUAC. The average absolute deviation between the predicted and measured lower flash point was less than 1.69 K.

• Journal of the Korean Society of Safety
• /
• v.29 no.3
• /
• pp.39-45
• /
• 2014

For the safe handling of n-hexadecane, the lower flash points and the upper flash point, fire point, AITs(auto-ignition temperatures) by ignition delay time were experimented. Also lower and upper explosion limits by using measured the lower and upper flash points for n-hexadecane were calculated. The lower flash points of n-hexadecane by using the Setaflash and the Pensky-Martens closed testers were measured $128^{\circ}C$ and $126^{\circ}C$, respectively. The lower flash points of the Tag and the Cleveland open cup testers were measured $136^{\circ}C$ and $132^{\circ}C$, respectively. The fire points of the Tag and the Cleveland open cup testers were measured $144^{\circ}C$. respectively. This study measured relationship between the AITs and the ignition delay times by using ASTM E659 apparatus for n-hexadecane. The experimental AIT of n-hexadecane was $200^{\circ}C$. The calculated lower and upper explosion limit by using measured lower $128^{\circ}C$ and upper flash point $180^{\circ}C$ for n-hexadecane were 0.42 Vol.% and 4.70 Vol.%.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.11
• /
• pp.31-38
• /
• 2015

Nowadays, large size flash memory drives with more than a couple of hundreds of gigabytes are common. This paper presents an efficient cache management scheme of flash translation layer, called TPC-FTL, for large size flash memory drives. Since flash drives of large size usually contain large size RAM, we can enhance the performance of page mapping cache by using more RAM for the cache. But if the size exceeds a threshold, the existing schemes are impractical for real devices, because the time for cache manipulation becomes too long. TPC-FTL manages the cache in translation page unit, not in logical page number unit used in existing schemes. Since a translation page covers a large number of logical page numbers (for example, 512 for 2KB size page), the number of cache elements can be reduced up to a practical level. A performance evaluation shows that average response time, an important performance measure, is better than existing schemes via the effect of utilizing spacial locality in addition to temporal locality.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.1
• /
• pp.91-97
• /
• 2013

Recently a novel cycle named organic flash cycle (OFC) has been proposed which has improved potential for power generation from low-temperature heat sources. This study carries out thermodynamic performance analysis of OFC using various working fluids for recovery of low-grade heat sources in the form of sensible energy. Special attention is focused on the optimum flash temperature at which the exergy efficiency has the maximum value. Under the optimal conditions with respect to the flash temperature, the thermodynamic performances of important system variables including mass flow ratio, separation ratio, heat addition, specific volume flow rate at turbine exit, and exergy efficiency are thoroughly investigated. Results show that the exergy efficiency has a peak value with respect to the flash temperature and the optimum working fluid which shows the best exergy efficiency varies with the operating conditions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1529-1534
• /
• 2013

Since a NAND-flash memory is able to store mass data in a small sized chip and consumes low power, it is exploited on various hand-held devices, such as a smart phone and a sensor node, etc. To process efficiently mass data stored in the flash memory, it is required to use an index. However, since the write operation of the flash memory is slower than the read operation and an overwrite operation is not supported, the usage of existing index schemes degrades the performance of the index. In this paper, we survey the previous researches of index schemes for the flash memory and classify the researches by the methods to solve problems. We also present the performance factor to be considered when we design the index scheme on the flash memory.

• Journal of the Korean Society of Safety
• /
• v.24 no.1
• /
• pp.89-94
• /
• 2009

The purpose of this study is to estimate the critical flood discharge and flash flood trigger rainfall for alarm system providing for a flash flood in mountainous area. The flash flood need non-linear approaching method, because rainfall-runoff is nonlinear and it is difficult to explain the existing linear rainfall-runoff. Hydrological characteristics would be utilized to apply such as hydrologic modelling or basin management. This study was effectively estimated a topographic characteristic factor of basin using the GIS. Especially, decided stream order using GIS at stream order decision that is important for input variable of GCIUH. A flash floods defined as a flood which follows shortly after a heavy or excessive rainfall event, with a few hours. In this study, we gave a definition that a critical flood for alarm is the flood when valley depth judging dangerous depth is over 0.5m depth from the bottom of channel. Result that calculate threshold discharge to use GCIUH, at the Mureung valley basin, flash flood trigger rainfall was 16.34mm in the first 20minutes when the threshold discharge was $14.54m^3/sec$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.255-261
• /
• 2013

In this paper, we developed and tested a program for prediction flash fire in a combat system. Purposes of the program are flash fire prediction of combat system for analysis vulnerability and survivability, and visualization for fire-related information. To do this, we defined critical components of the combat system which has probabilities of flash fire occurrence, and proposed Flash Fire Probability Tree which is based on Fault Tree Analysis(FTA). The program visualizes positions of critical components in combat system, positions of penetrated components, selected Flash Fire Probability Tree, temperature profile, and tables for properties of matters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4629-4634
• /
• 2010

Most prevention efforts have been made for relatively large watersheds near to channel flow. However, as economical development and the expansion of leisure areas to mountainous region, human casualty by flash flood occurs frequently, requiring additional prevention activity. Therefore, to minimize the damage of human lives and property by flash flood, we develop a methodology to assess the risk of flash flood occurrence for mountainous areas considering various factors involving it. For accomplishing the task, we selected the assessment indexes such as the characteristics of region, rainfall and land in mountainous area. And considering the characteristics of these indexes, the assessment method was suggested to assess and select the reasonable points for flash flood warning system. The suggested method was applied to BongHwa region and the application process of this method was explained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.710-716
• /
• 2008

This paper covers the performance evaluation of two flash memory-based file storages, NAND and NOR, which are the major flash types. To evaluate their performances, we set up separate file storages for the two types of flash memories on a PocketPC-based experimental platform. Using the platform, we measured and compared the I/O throughputs in terms of buffer size, amount of used space, and kernel-level write caching. According to the results from our experiments, the overall performance of the NAND-based storage is higher than that of NOR by up to 4.8 and 5.7 times in write and read throughputs, respectively. The experimental results show the relative strengths and weaknesses of the two schemes and provide insights which we believe assist in the design of flash memory-based file storages.