• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.32-35
• /
• 2002

The work focuses on the development of a Cu lead-frame with a single-sided adhesive tape for cost reduction and reliability improvement of LOC (lead on chip) package products, which are widely used for the plastic-encapsulation of memory chips. Most of memory chips are assembled by the LOC packaging process where the top surface of the chip is directly attached to the area of the lead-frame with a double-sided adhesive tape. However, since the lower adhesive layer of the double-sided adhesive tape reveals the disparity in the coefficient of thermal expansion from the silicon chip by more than 20 times, it often causes thermal displacement-induced damage of the IC pattern on the active chip surface during the reliability test. So, in order to solve these problems, in the resent work, the double-sided adhesive tape is replaced by a single-sided adhesive tape. The single-sided adhesive tape does net include the lower adhesive layer but instead, uses adhesive materials, which are filled in clear holes of the base film, just for the attachment of the lead-frame to the top surface of the memory chip. Since thermal expansion of the adhesive materials can be accommodated by the base film, memory product packaged using the lead-flame with the single-sided adhesive tape is shown to have much improved reliability. Author allied this invention to the Korea Patent Office for a patent (4-2000-00097-9).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2348-2353
• /
• 2007

In this work, combustion-synthesized $TiO_2$ nanoparticles were used for the photocatalytic degradation of methylene blue with UV light irradiation. Also the results were compared with those of commercial $TiO_2$ nanoparticles (Degussa, P-25). Particle characteristics of the two were analyzed thru the SEM, TEM, and XRD. In spite of the lower specific surface area than that of P-25, the $TiO_2$ nanoparticles formed in this study showed the relatively good ability to degrade the concentration of the organics.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1996년도 학술발표회
• /
• pp.62-67
• /
• 1996

The smouldering combustion of cellulose Insulation treated with boric acid - borax - aluminium sulfate as combustion retardants are examined by candle type combustibility tester. The flammability behavior of combustion process is LOI, Smouldering region, Smouldering, Flamming spread region and Flame spread region. In this experiment, Particle size of four examined LOI, L.Point, H.Point, at the biggest size show high LOI. The surface area is connected with thermal conduction. The phenomena of combustion transition are governed by quantity of combustible gas generation in heating zone of cellulose insulation.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.88-93
• /
• 2004

This experimental study was carried out to evaluate effect of the radiation heat flux for the pool and spill fire in petroleum storage tanks, which were made form steel. Each of them had the capacity of 250, 2500 and 25000 liter, respectively. The effects of the radiation heat flux are as follows; 1) The intensity of radiation heat flux from a flame decreased exponentially with increasing distance from outside wall of tanks, and increased significantly with surface area of tank and dyke. 2) In the case of 25000L tank, the radiation heat flux was about max. 98.9kW/$m^2$ in 1m from wall of tank. 3) The distance, that was able to ignite wood or plastics by radiation heat flux of approximately 12.5kW/$m^2$, was about 3.14m from wall of 25000L tank.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.111-112
• /
• 2020

In the case of, the ignition of flammable external materials by the radiant flame and the accompanying fire in the upper layer are occurring every year, and in the case of the Flashover prediction formula, the limit is reached through the surface area of the space and the factor. Predicts heat release rate. In this study, the critical heat release rate of each prediction formula was calculated based on the ISO 9705 model.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.78-84
• /
• 2012

금형의 공정 과정에서 금형과 성형품 사이에서 발생하는 마찰로 인해 발생하는 금형의 마모가공차로 작용하여 성형 품질을 저하시킬 수 있다. 따라서 금형의 내마모성을 향상시키기 위해 질화나 침탄처리, 화염 및 고주파 표면처리 등의 방법들이 적용되어 왔다. 하지만 형상의 제한이나 제품의 변형 등과 같은 문제점을 수반하고 있기 때문에, 이러한 문제점을 해결할 수 있는 표면처리 방법으로써 레이저 표면처리 기술이 검토되고 있다. 따라서 본 연구에서는 고출력 다이오드 레이저를 이용, 금형재료용 주철의 표면처리를 시도하였다. 앞서 제1보와 제2보의 논문에서는 금형의 재료 및 형상의 차이에 따른 열처리 특성을 비교하였다면, 본 논문에서는 열처리 후 생성되는 경화부, 경계부위 및 모재의 조직적 차이를 분석하기 위해 광학 현미경 및 전자 현미경을 이용하여 미세조직을 관찰하고, EDS를 통해 조직의 상태를 파악하였다. 미세조직 관찰 결과, 경화부는 침상의 마르텐사이트 조직이 형성되어 있었다.

• 대한화학회지
• /
• 제61권4호
• /
• pp.143-150
• /
• 2017

절연유에 높은 농도로 함유되어 있는 폴리염화바이페닐(PCB)을 처리하기 위해서 역류산화공정이 개발되었고 그 평가가 이루어졌다. 학산금속공업(주)로부터 구한 절연유 중의 PCBs의 함량은 1,512 ppm이었다. 역류산화공정은 산소의 흐름 속도와 반대되는 방향으로 자기 스스로 이동하는 자발적인 불꽃을 이용한다. 불꽃은 활성탄에 흡착되어 있는 PCBs를 제거함과 동시에 활성탄을 재생시킨다. 불꽃의 온도는 활성탄의 질량 손실과 역류산화공정 동안 배출되는 CO와 $CO_2$의 상대적인 비에 의해 결정하였고, 온도는 $650{\sim}850^{\circ}C$의 범위를 보였다. PCBs의 제거 효율은 무게비로 활성탄에 5%가 적재된 절연유를 1번의 역류산화공정을 거쳤을 때 99.99%이상을 나타내었다. 또한 60%의 절연유를 활성탄에 적재하여 3번의 연속적인 역류산화공정을 거쳤을 때 같은 제거 효율을 얻었다. 덧붙여서, 역류산화공정 동안 활성탄의 비표면적은 신탄의 수치와 비슷한 수준으로 회복되었다. 역류산화반응은 쉽고 경제적으로 절연유에 있는 고농도의 PCBs를 제거하는데 대단히 효과적이다는 것을 증명하였다.

• Archives of Plastic Surgery
• /
• 제38권4호
• /
• pp.445-450
• /
• 2011

Purpose: The objective of this study is to analyze the epidemiological characteristics of pediatric burn patients and to determine the targets for a pediatric burn prevention program. Methods: A retrospective review of all medical records of acute pediatric burn patients (age < 15 years old) admitted to our hospital between January 2005 and December 2009 was performed. Results: 1472 males and 1323 females were investigated, with a male to female ratio of 1.11 : 1. The greatest number of burn patients were those with an age of 1~2 years (1,463, 52.3%). Scalding burn was the most common cause of injury, which accounted for 2183 (78.1%) patients, followed by contact burns (10.5%), flame burn (4.9%), steam burn (3.6%). Especially steam burn was the second cause of injury in the age under 1 year, while flame burn was the second cause of injury in the age over 7 years. During recent 5 years, incidence of flame burn, steam burn, electrical burn gradually decreased. Variation of seasonal incidence is minimal and most of the patients (2,716 cases, 97.2%) had burns less than 20% TBSA (Total body surface area). The median hospital stay was 18.79 days, and the rate of operation was 28.6% with a high rate in electrical burn (76.2%), flame burn (50.0%), steam burn (46.1%). 6 patients died in this series, which yielded a mortality rate of 0.2%. Conclusion: Prevention efforts should reflect recent study results. Focused prevention program and campaign to make people aware of risk factors and their avoidance is required to reduce the number of burn accidents in children.

• Journal of Plant Biology
• /
• 제11권4호
• /
• pp.9-20
• /
• 1968

In general there are few cases which were caused by lightening and no fire was observed to have been caused but by artificial or accidental fires during preliminary survey. And then the most scales of burning in Korea are like the fig. 2. Temperature 5 cm apart from flame at the burning site were known to range from 165$^{\circ}$to 20$0^{\circ}C$ in surface fire on Myozangdong, pine-quercus dominant community and from 120$^{\circ}$ to 145$^{\circ}C$ in surface fire of Wolwoonni, Mischanthus dominant area and from 120$^{\circ}$ to 14$0^{\circ}C$ in ground fire of Wangzinkun, Mischanthus dominant, respectively. Through the preliminary survey, fire indicater plants in Korea were confirmed as Mischanthus coreensis Hack and Carex alterifolia Franch. The plants of highest frequency appeared in the burnt sites were known to as Potentilla cryptotaeniae Max, Mischanthus coreensis Hack, Carex alterifolia Franch and Artemisia brachyphylla Kitamura. Lespedezas were proved as one of the fire tolerant and Pinus densiflora was found out as the lowest intolerant plant to fire. The acidity of burnt soil was decreased according to the considerable amount of ash left on the ground. The acidity of surface soil was more decreased than the below 10cm of soil. The chemical composition(NO3, P, K, Mg, Total-N and Organic-C) of burnt soil was more increased than those of the unburnt sites. And the population changes of soil microflora seemed to have a certain tendency. The population of soil microflora was increased a little according to climatic conditions. Also there was an initial decrease in the population of microflora followed immediately by a significant increase.

• 폴리머
• /
• 제26권2호
• /
• pp.260-269
• /
• 2002

본 연구에서는 범용 열가소성수지인 폴리프로필렌에 다양한 입자 강화제로 무기질 폐기 제올라이트, 탈크, 탄산칼슘 등을 첨가하여 소재를 복합재료화 하였다. 또한 입자 사이즈에 따른 열안정성과 입자 강화제에 따른 난연 특성을 확인하였다. 본 연구에서는 입도 분석 결과 폐기 제올라이트가 85.34 $mu extrm{m}$, 탄산칼슘이 33.93 $mu extrm{m}$, 탈크가 18.51 $mu extrm{m}$의 평균 입자 크기를 가지고 있는 것을 확인하였다. 난연성 측정으로 산소지수(LOI, ASTM D2863)와 콘 칼로리미터 (ASTM E1354 ISO 5660)를 사용하였으며, 열 안정성 측정으로는 TGA를 사용하였다. 입자 강화제와 난연제 DBDPO를 사용한 결과 최대 열 방출 속도(M-HRR)는 탈크>탄산칼슘>폐기 제올라이트 순으로 감소됨을 확인하였다. 콘 칼로리미터 실험 결과, 난연제 DBDPO만 혼합하였을 경우보다 입자 강화제를 첨가 혼합하였을 경우가 난연 효율이 대략 2배 정도 향상됨을 확인하였다. 또한 산소지수 결과도 콘 칼로리미터와 유사한 경향을 보임을 확인하였다. 광학현미경(OM)과 주사전자현미경(SEM)을 사용하여 입자 강화된 복합재료의 연소되는 과정의 단면을 연소 단계별로 관찰함으로써 연소 표면에서의 입자 강화제의 배열 양상 및 산소 공급의 특성 등을 연구하였다.