• 한국화재소방학회논문지
• /
• 제26권3호
• /
• pp.73-78
• /
• 2012

화점높이 변화에 따른 풀 화재와 회오리 화염의 연소특성을 알아보기 위하여 인화성 액체인 메탄올을 $100{\times}100{\times}50$ 크기의 스테인레스 재질의 사각형 용기에 넣고 연소실험을 하였다. 연소시간, 질량감소속도, 화염온도, 화염높이 및 외부로부터 화염으로의 공기유입속도 등을 측정하였으며, 연소시 화염의 거동은 비디오카메라를 이용하였다. 모든 실험결과로부터 화점높이 변화에 따른 연소특성은 풀 화재보다는 회오리 화염에 있어서 더 큰 영향을 준다는 것을 알 수 있었다.

• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.19-24
• /
• 2010

Five different size of orifice were applied in a constant volume combustion chamber for evaluating the effects of torch-ignition on combustion. The initial flame development and flame propagation were analyzed by the mass burned fraction and combustion enhancement rate. The combustion pressures were measured to calculate the mass burned fractions and the combustion enhancement rates. In addition, the flame propagations were visualized by the shadowgraph method for the qualitative comparison. The result showed that the combustion pressure and mass burned fraction were increased when using the torch-ignition device. The combustion enhancement rates of torch-ignition cases were improved in comparison with conventional spark ignition. Finally, the visualization results showed that the torch-ignition induced faster burn than conventional spark ignition due to the earlier transition to turbulent flame and larger flame surface, during the initial stage.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.157-163
• /
• 2011

마그네슘 입자 군 연소 실험 장치를 제작하고 연소 실험을 수행하였다. 예혼합 화염용 버너에서 마그네슘 입자의 공급 질유량을 변화시켰을 때 점화 지연시간의 변화를 확인하였다. 마그네슘의 질량유량을 증가시킴에 따라 점화 지연시간이 단축됨을 확인하였다. 또한 마그네슘 입자 크기 별, 혼합비에 따라 변화시켰을 군 연소 화염 온도를 two wavelength pyrometry 를 이용하여 군 연소 화염온도를 측정하였다. 입자 크기별 군 연소 화염온도는 거의 비슷함을 확인 할 수 있었으며, 당량비에 따른 화염온도의 측정을 통해 연소되는 마그네슘 연소화염 분포의 특성을 알 수 있었다.

• 대한기계학회논문집B
• /
• 제34권3호
• /
• pp.259-267
• /
• 2010

본 연구는 아역청탄의 미분탄 연소특성에 있어서, 입자크기가 미치는 영향을 알고자 실험을 통해 고찰한 것이다. 본 연구를 위하여, 온도 및 온도 상승률을 고려해 볼 때, 실제 미분탄 연소로의 환경을 잘 구현할 수 있는 층류반응기를 설계하고 이용하였다. 크기가 다른 미분탄 입자들이 탈 때 형성되는 화염구조 및 길이를 본 반응기를 이용해 조사하였다. 육안으로 관찰된 화염구조로부터 석탄연소과정들을 분명하게 구분할 수 있었다. 입자의 크기변동은 휘발분 점화개시점에 미치는 영향이 큰 반면, 휘발분의 연소시간에 미치는 영향은 가장 적었다. 입자의 크기가 커질수록 촤의 화염길이도 증가하였다. 화염불안정성 역시 입자가 커짐에 따라 증대되었다. 일정한 체류시간 간격내에서의 촤의 소비율은 거의 일정하였다.

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1591-1599
• /
• 2004

A series of experiments were conducted to study the effectiveness of the extinction of a liquid pool fire with two different water atomizing nozzles. Fire source is a small-scale circular stainless steel pan of 120mm in diameter with the fuels of hexane and ethanol. K-type thermocouples were used to measure the flame and fuel temperature along the pool centerline and under fuel surface. A digital camera was used to visualize the process of the fire suppression. The experimental results show that water mist droplet size is l15∼180${\mu}{\textrm}{m}$ with nozzle A and 130∼190${\mu}{\textrm}{m}$ with nozzle B. The extinguishing time of pool fire was reduced with the increase of pressure. When water droplets are small, they do not reach the flame base since they may be deflected or evaporated by the fire plume. However, influence of flow rate is more important than droplet size on fire extinction. Among the fire extinction mechanisms, drop of flame temperature is superior to suffocation of $O_2$ concentration.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.215-221
• /
• 2003

A series of experiments were conducted to study the effectiveness of the extinction of a liquid pool fire with two different water atomizing nozzles. Fire source is small-scale circular stainless steel pan of 120mm in diameter with the fuels of hexane and ethanol. K-type thermocouples were used to measure the flame and fuel temperature along the pool centerline and under fuel surface. A digital camera was used to visualize the process of the fire suppression. The experimental results show that water mist droplet size is $115{\sim}180{\mu}m$ with nozzle A and $130{\sim}190{\mu}m$ with nozzle B. The extinguishing time of pool fire was reduced with the increase of pressure. When water droplets are small, they do not reach the flame base since they may be deflected or evaporated by the fire plume. However, influence of flow rate is more important than droplet size on fire extinction. Among the fire extinction mechanisms, drop of flame temperature is superior to suffocation of O2 concentration.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1379-1389
• /
• 1999

A new technique for control of size and shape of flame-made particles is Introduced. The characteristic sintering time can be controlled Independently of collision time by heating the particles with irradiation of laser because the sintering time strongly depends on temperature. A coflow oxy-hydrogen diffusion flame burner was used for $SiCl_4$ conversion to silica particle. Nanometer sized aggregates irradiated by a high power CW $CO_2$ laser beam were rapidly heated up to high temperatures and then were sintered to approach volume-equivalent spheres. The sphere collides much slower than the aggregate, which results in reduction of sizes of particles maintaining spherical shape. Light scattering of Ar ion laser and TEM observation using a local sampling device were used to confirm the above effects. When the $CO_2$ laser was irradiated at low position from the burner surface, particle generation due to gas absorption of laser beam occurred and thus scattering intensity increased with $CO_2$ laser power. At high irradiation position, scattering intensity decreased with $CO_2$ laser power and TEM image showed a clear mark of evaporation and recondensation of particles for high $CO_2$ laser power. When the laser was irradiated between the above two positions where small aggregates exist, average size of spherical particles obviously decreased to 58% of those without $CO_2$ laser irradiation with the spherical shape. Even for increased carrier gas flow rate by a factor of three, TEM photograph also revealed considerable reduction of particle size.

• 한국연소학회지
• /
• 제7권1호
• /
• pp.37-43
• /
• 2002

Spray characteristics in the swirling flow were investigated by Stereoscopic PIV. Spatial spray structures were measured by PIV as well as PDA in order to understand stable flame stabilization. The feasibility study of Stereoscopic PIV in spray flame was also demonstrated. The size and location of recirculation flow were measured. The stereoscopic PIV could provide 3-D flow fluctuation that cannot be measured by convectional measurement systems.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.301-304
• /
• 2015

With the experiment observation of single particle combustion, this model is built for the numerical analysis of the process. It's about the single coal particle combustion process under different conditions with reasonable assumptions. The model can express the mass, radius, density, temperature changing with different particle sizes, oxygen concentration and gas temperature. It also includes the flame sizes change in different condition and the diffusion of each species. The result shows the characters of the combustion.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.59-60
• /
• 2013

Rotary kiln furnace is one of the most widely used gas-solid reactors in the industrial field. Although the rotary kiln is a versatile system and has different size, approach to the reactor modeling can be generalized in terms of flow motion of the solid and gas phase, heat transfer and chemical reactions on purpose. In this paper, a performance analysis example case of axial direction direct flame rotary kiln is introduced.