• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.603-606
• /
• 2006

We present a study on the development of a practical and quantitative technique for the assessment of the structural health condition with using piezoceramic(PZT) sensors. The electro-impedance-based technique with the PZT patches is very sensitive for evaluation of the incipient and small damage in a high frequency range, and however the commonly traditional modal analysis method is effective only for considerably larger damages in low frequency range. The paper presents the technique in detecting and characterizing real-time damage on the specimen that is an aluminum plate fastened with bolts and nuts by different torques and as well a plate with a crack. By using the special arrangement of the PZT sensors, the required longitudinal wave is generated through the specimen. A large number of experiments are conducted and the different conditions of the specimens, i.e. the location and extent of loosening bolts, and the plate with a crack are simulated. respectively. Since fixing and loosening the loosened bolt is controlled by a torque wrench, we can control exactly the experiment of the different torques. Compared with the simulated healthy condition, we can find whether or not there is a damage in the specimen with using an impedance analyzer with the PZT sensors. Several indices are discussed and used for assessing the different simulated damages. As for the location of bolt loosening, the RMSD is found to be the most appropriate index for numerical assessment and as well the RMSD shows strongly linear relationship for assessing the extent of the bolt loosening, and the frequency peak shift ${\Delta}F$ is used to assess the cracked plate. The possibility of repeatability of the pristine condition signatures is also presented and the appropriate frequency range and interval are uniquely selected through large numbers of experiments.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.3 s.76
• /
• pp.33-39
• /
• 2007

The more deeply the researches make progress in ocean researches including the seabed resource investigation or the oceanic ecosystem investigation, the more important the role of UUV gets. In case of study on the deep sea, there are difficulties in telecommunications between AUV and ships, and in data communication and recharging. Therefore, docking is required. In AUV docking system, the AUV should identify the position of docking device and make contact with a certain point of docking device. MOERI (Maritime & Ocean Engineering Research Institute), KORDI has conducted the docking testing on AUV ISIMI in KORDI ocean engineering water tank. As AUV ISIMI approachs the docking device, there is some cases of showing an unstable attitude, because the lights which is on Image Frame are disappeared. So we propose the docking algorithm that is fixing the rudder and stem, if the lights on image frame are reaching the specific area in the Image Frame. Also we propose the new docking device, which has a variety of position and light number. In this paper, we intend to solve the some cases of showing an unstable attitude that were found in the testing, which, first, will be identified the validity via simulation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.11-19
• /
• 2014

In this paper, a low complexity parallel sphere decoder algorithm is proposed for high-order MIMO system. It reduces the computational complexity compared to the fixed-complexity sphere decoder (FSD) algorithm by static tree-pruning and dynamic tree-pruning using scalable node operators, and offers near-maximum likelihood decoding performance. Moreover, it also offers hardware-friendly node operation algorithm through fixing the variable computational complexity caused by the sequential nature of the conventional SD algorithm. A Monte Carlo simulation shows our proposed algorithm decreases the average number of expanded nodes by 55% with only 6.3% increase of the normalized decoding time compared to a full parallelized FSD algorithm for high-order MIMO communication system with 16 QAM modulation.

• Archives of Plastic Surgery
• /
• v.40 no.2
• /
• pp.91-96
• /
• 2013

Background A thinned anterolateral thigh (ALT) flap is often harvested to achieve optimal skin resurfacing. Several techniques have been described to thin an ALT flap including an adipocutaneous flap, an adipofascial flap and delayed debulking. Methods By systematically reviewing all of the available literature in English and French, the present manuscript attempts to identify the common surgical indications, complications and donor site morbidity of the adipofascial variant of the ALT flap. The studies were identified by performing a systematic search on Medline, Ovid, EMBASE, the Cochrane Database of Systematic Reviews, Current Contents, PubMed, Google, and Google Scholar. Results The study selection process was adapted from the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement, and 15 articles were identified using the study inclusion criteria. These articles were then reviewed for author name(s), year of publication, flap dimensions and thickness following defatting, perforator type, type of transfer, complications, thinning technique, number of cases with a particular area of application and donor site morbidity. Conclusions The adipofascial variant of the ALT flap provides tissue to fill large defects and improve pliability. Its strong and safe blood supply permits adequate immediate or delayed debulking without vascular complications. The presence of the deep fascia makes it possible to prevent sagging by suspending and fixing the flap for functional reconstructive purposes (e.g., the intraoral cavity). Donor site morbidity is minimal, and thigh deformities can be reduced through immediate direct closure or liposuction and direct closure. A safe blood supply was confirmed by the rate of secondary flap debulking.

• Journal of Animal Environmental Science
• /
• v.4 no.2
• /
• pp.97-104
• /
• 1998

In order to advise how to solve the problems and suggest on the mechanization of beef farm, the facilities and equipment for feeding and supplying water to the animals and transporting manure, and farm machineries of sixty-seven beef cattle farms in western Chungnam Province were surveyed. The results are as follows; 1. The proportions of number of heads per farm for above 70, 50∼70, 30∼50, 10∼30 and below 10 heads were 26, 18, 29, 13 and 13, respectively. The farms with the annual income more than 30 million won are consisted of 67.6% of the farms surveyed which showed to be higher than national average. 2. Only 19% of farms had automatic feeding system. Water was supplied by water cup(45%), opening and shutting water tab(27.6%) and bucket. 3. Cattle manure was transported by manpower (46%) by loader (34%) and by gravitational flow (14%). Most of manure(97%) was composted after treatment of drying or piling up outside. 4. More instruction and education were required because of the insufficient routine checking and fixing for farming machines, and unsystematic education for learning skills. 5. 65% of farms felt unsatisfied about after service(A/S) for their machinery. The main reason why the farmers were not satisfied was that it took too much time to be repaired. 6. When the farms purchased facilities, equipment and machinery, they did not analyze economic value of them and keep a diary. To make effective use of machines, the most available model for purchasing and managing of machines must be developed and applied to various scales of management.

• Journal of Food Hygiene and Safety
• /
• v.35 no.2
• /
• pp.183-188
• /
• 2020

The manufacturing process for konjac jelly is largely divided into the three processes of powder manufacturing, a coagulation and finishing. It was found that the number of aerobic bacteria in konjac jelly decreases as the concentration of coagulation agent and soaking liquid increases. The temperature of the water has no significant effect. When the concentration of coagulation agent was maintained at 1.0%, the tensile strength was also maintained without significant change for up to 10 months. When the concentration was kept below 0.8%, however, the tensile strength showed a tendency to sharply decrease. After fixing the coagulant concentration to 1.0%, the effect by the soaking liquid was confirmed. At all concentrations of soaking, it was found that both tensile strength and bacterial numbers are unchanged until 10 months of storage.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.24-35
• /
• 2015

Aging educational facility shall be managed and maintained through integrated service perspectives, in consideration of functions of each facility to provide safe and comfortable environment, rather than temporarily fixing/repairing problems. For doing this, it is a must to firstly understand the limitation of highly biased performance-based maintenance practice, which is a most common type applied at present, and therefore to establish maintenance system that reflects the functions and characteristics of maintenance service that a facility was designed with. Therefore, the objective of this study is to find items that have an influence on service level recognition in order to fairly evaluate service functions of educational facilities, and subsequently to use these factors as ingredients of establishing a consistent and efficient maintenance system. Therefore this study proposed explanatory variables to measure influential factors for each major maintenance category. Then appropriate statistical verification was carried out on questionnaires that collected from a number of industry experts to test its fe asibility.

• Korean Journal of Microbiology
• /
• v.38 no.1
• /
• pp.45-49
• /
• 2002

Bradyrhizobium japonicum is a soil bacterium with a unique ability to infect the roots of leguminous plants and establish a nitrogen-fixing symbiosis, which has been used as a microbial manure. In this study, we examined the stress response after pretreatment of cells with cold temperature. When pre-treated with cold temperature ($4^{\circ}C$) for 16 hr, B. japonicum increased the viability in subsequent stress-conditions such as alcohol, $H_2O_2$, heat, and dehydration. For cold adpatation, cultured B. japonicum was exposed to $4^{\circ}C$. Upon subsequent exposure to various conditions, the number of adapted cells pretreated by cold adaptation was 10-1000 fold higher than that of non-adaptated ones. It appeared de novo protein synthesis occurred during adaptation, because a protein synthesis inhibitor, chloramphenicol abolished the increased stress tolerance. By using a degenerate PCR primer set, a csp homolog was amplified from B. japonicum genome and sequenced. The deduced partial amino acid sequence of the putative Csp (Cold shock protein) shares a significant similarity with known Csp proteins of other bacteria.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.12 no.1
• /
• pp.43-64
• /
• 2001

The purpose of this study was to measure performance of university libraries, especially investigating the components of service quality and their relationship to the customer satisfaction. The result of the statistical analyses is summarized as follows： The result of 5 point scale study shows the following degree of satisfaction in 55 components： timeliness of circulation, processing of fine. location of library, usefulness of retrieval system, library user education, speed of retrieval. number of terminals, and cleaning. On the other hand, shows the following degree of dissatisfaction in 55 components： speed of civil petitions, hour for program use, result of civil petitions, fixing of library user education, speed of retrieval, method of public relation, waiting time for Internet use, and use of the other library materials. Also. customers’matters of weight and importance was availability. learning facilities, suitable collections, circulation, and system of retrieval.

• Molecules and Cells
• /
• v.24 no.2
• /
• pp.185-193
• /
• 2007

Symbiotic nitrogen fixation with nitrogen-fixing bacteria in the root nodules is a distinctly beneficial metabolic process in legume plants. Legumes control the nodule number and nodulation zone through a systemic negative regulatory system between shoot and root. Mutation in the soybean NTS gene encoding GmNARK, a CLAVATA1-like serine/threonine receptor-like kinase, causes excessive nodule development called hypernodulation. To examine the effect of nts mutation on the gene expression profile in the leaves, suppression subtractive hybridization was performed with the trifoliate leaves of nts mutant 'SS2-2' and the wild-type (WT) parent 'Sinpaldalkong2', and 75 EST clones that were highly expressed in the leaves of the SS2-2 mutant were identified. Interestingly, the expression of jasmonate (JA)-responsive genes such as vspA, vspB, and Lox2 were upregulated, whereas that of a salicylate-responsive gene PR1a was suppressed in the SS2-2 mutant. In addition, the level of JA was about two-fold higher in the leaves of the SS2-2 mutant than in those of the WT under natural growth conditions. Moreover, the JA-responsive gene expression persists in the leaves of SS2-2 mutant without rhizobia infection in the roots. Taken together, our results suggest that the nts mutation increases JA synthesis in mature leaves and consequently leads to constitutive expression of JA-responsive genes which is irrelevant to hypernodulation in the root.